How To Program The Hardie Rain Dial Irrigation Controller

[@learnfromthemastersmusicou7241]

You saved me a lot of time and frustration with your three minute video. Thank you for putting this up for us!

[@bobadiag]

Very Good.!!! Thank you.!!!

[@SchepersLawnSprinklingSystems]

Thank you for watching!

[@georgerenoj3210]

❤ Thanks for the vital information.

[@SchepersLawnSprinklingSystems]

Thank you for watching!

[@jakumaSS]

How can i run 2 zones simultaneously for same amount of time? I had programmed like this before but i lost power n have to program it again. Now i cant figure out how to run 2 zones at same time.

[@karenjordan6643]

do you do trouble shooting?? I know how to program my Hardie Rain Dail. The trouble I am having is I get things set, I set to run or manual and push semi-auto. Then the clock starts blinking. The sprinklers won't start automatically according to the time and day they are set. It has a fresh battery and is also plugged into a power outlet. It was working just a few weeks ago and now it's not.

[@SchepersLawnSprinklingSystems]

Hello, put the controller in the run position and the dial on current time, no need to hit the semi auto button. The clock will start with the start times programmed and run the times on the zones. The clock should not be blinking. Hope this helps!

[@gosman949]

What would program B and C do? Are these complete new programs that have different times and amounts of watering? I thought this but it doesn't seem to be true.

[@SchepersLawnSprinklingSystems]

Hello, yeah you would use a second or third program for different watering needs. For example, landscape beds need far less water than turf grass so you can set up program b and water that every third or forth day and keep program a for the turf and water that every day. Hope this helps!

[@lutzshawn]

Does anybody know if this controller will run each zone sequntially.. like one after another?

[@SchepersLawnSprinklingSystems]

Hello, one zone at a time, one after the other as long as they have time on the zone.

[@barefootarts737]

I was trying to reset this controller to specific days of the week but you skipped over that for some reason??

[@SchepersLawnSprinklingSystems]

Hello, go to set/program, then turn the dail to the day you want turned off, and hit the minus button and that will turn that day off, hope this helps!