How to program your Bryant thermostat

[@lojeism]

What if I just want to use it manually?!!

[@spongebobon10hz78]

Thank you guys :) my AC went out and it just got fixed cause of you. You guys are the B E S T. many blessing I hope you guys are having a wonderful life

[@sierracoolsvegas]

You're welcome! Glad we could help!

[@davids3705]

Thank you for this explanation; it has helped me program using the extremely unfriendly interface on my Byrant thermostat. However, I will _never_ buy a Bryant thermostat again. The interface on this thermostat is very terrible.

[@Jgrandecokk]

Indeed fuck that thermostat

[@ericchavez6559]

I hate ours. Such a pain in the but. Keeps random turning off at night.

[@delllaurel]

So I programmed my Bryant thermostat so do we leave it in the Off, heat or cool position for the program to run automatically

[@Lara-wr2nm]

Hello. Can you please tell me if you do not want programming and want to just adjust manually how do you do that and if there's already programming set how do you clear that programming?

[@williecarnalesmith3831]

This is what I want to know.

[@LindseyPixiehorn2]

How the hell do you stop the time settings? I'm in Texas 105° and it will go to 85° I don't know how to deprogram it. I have to have it at 73° but it won't stay there long

[@JmeBillsMafia1283]

Can i replace that thermostat with a smart one? And try to zone the temperature for Each room? Or do i need to have a special install for that?

[@davidwagner7338]

Any way to adjust the differential? My system runs in zones and it short cycles because this thermostat only lets it get like .5 degrees above set point and comes down to quickly in mild weather? I'd prefer it to have a 2 degree differential...

[@youtuberhandle420]

Did you ever figure out a way to change the differential? Having the same exact issue and thinking about swapping the thermostat.

[@jinxfox1]

i want one temp at all times. do i have to go through all this?

[@LindseyPixiehorn2]

Same! But mine goes down to 85° about a few hours after I put it on 73,° confusing

[@ginawong4532]

I so hated this Bryant thermostats! So complicated 😏

[@KPad87]

How do you use it manually ?

[@justwhatchedthis1]

There is a hold button. So adjust to your desired set point then press the HOLD button. You should see it displayed on your thermostat and it will override the schedule. You can manually adjust the set point while on HOLD as well.

[@tripunk]

justwhatchedthis1 thank you Jesus your answer was the real fucking MVP for this confusing ass thermostat!!!!

[@nilawanjaidee8425]

Thus is a horrible system, who has time for this...

[@joshrohrer5240]

What if I just wanted to use it like a normal frickin thermostat. What a crazy notion right?

[@chatoyaporter2753]

Very complicated indeed. please revise!

[@ytsx388]

How to cancel the program

[@judypml]

Is this thermostat hard wired or battery operated? If battery operated, how to change battery?

[@GAMEbuffHD]

Check the top, u will see a slit. Use ur nails or a knife and slowly pop it...it will have two batteries.

[@marlintorres7438]

How you switch from F° to C°

[@sierracoolsvegas]

To Enter The Configuration Mode: Press and hold the FAN key for about 10 seconds until the display changes so that only two pairs of digits are showing. The configuration number, now 01, will appear in the setpoint/temperature location and the configuration setting will appear in the clock location. The configuration number (left pair) will be flashing which means it can be adjusted using the UP and DOWN keys. To cause the opposite pair to flash (to be adjustable), press the H/C key. Successive presses of the H/C key alternate between the configuration number (left) and the configuration setting (right). To exit the configuration mode, press the HOLD/END key. If no key is pressed for 3 minutes, the configuration mode will automatically exit, returning the thermostat to normal operation. *Option 03 -- Fahrenheit/Celcius*

[@willerkappers1379]

Thankyou

[@marthakaplanpoetry]

In our family, we all have different schedules. I just want one temperature during "heating season" and one for cooling once the temperatures heat up. My thermostat seems to behave erratically. And then puts extra wear on the furnace. (As a repair person told me-- and his explanations went a bit like this you tube, but twice as fast. Gah!)

[@benn1181]

Use up/down arrow to set to where you want and then press the hold/end button. The word "hold" will display on the screen and it will just sit at whatever temp you set it at

[@NatalieC128]

Ahhh I want to scream. I keep setting the thermostats to OFF and I keep doing HOLd so it stops adjusting but it keeps turning on

[@greggkushiner184]

This thermostat is the worst POS ever. I'm sorry I got rid of my golf clubs i would have taken this thing off the wall with a 9 iron. I there anyway possible to set this thing to maintain one temperature with both heat and/or cold depending on the interior temperature of the house? im going to rplace these things as soon as possible, they are crap, and Bryant knows it.

[@diegosanchez-oq4um]

Not even they understood

[@LindseyPixiehorn2]

This thermostat is to complicated

[@Pepemo24]

Lin Pixiehorn it’s a piece of garbage. Can not get it to work.

[@xmanxavier77]

I had to have maintenance come to my apartment two days in a row to help me out because It that was so confusing

[@marlynj7930]

So confusing to operate this at my home ,feel like to throw it away

[@ngoma]

confusing. use an example.

[@thenewgolddigger1015]

I hate programmable thermostat they are clear how to use

[@ronilmerto]

Way too complicated.

[@davidmartin6766]

The absolute worst thermostat. Do not let this be installed in your home. Way too confusing.

[@LiteMorena]

This is a complicated thermostat 😡

[@wanlili4106]

This thermostat is literally the most stupid thing I have ever seen in my life.

[@brianog5267]

Thanks for wasting more of my life.... only person more vague and confusing is my salesman who keeps quoting “I want to make this right” for you or some other canned company BS..... I want my 33 furnace back!