"How To Properly Build and Break In A Ball Differential and Slipper Clutch" Part 4

Рет қаралды 37,000

Ben Ray

Күн бұрын

Пікірлер: 27

@richv6004 11 жыл бұрын

Have asked many how to do this, this is the first time I have got the right answers to all my Diff questions. THANKS!

@New2Kendo 11 жыл бұрын

Forgot to add this is one of the most infromative series of vids out there, they helped me when setting up my new RC10B4.2, thanks

@berad1cal 12 жыл бұрын

seriously one of the most informative videos out there. awesome stuff.

@billdelonge9163 12 жыл бұрын

great series of vids. raced for years and never have i been able to build a diff till now. thank you, no gritty feeling at all. had to tighten it the first few laps like you said bout 1/16 turn. again thank you

@truckerk 5 жыл бұрын

Thanks for this video. I was stuck with a barking diff. after rebuild. I followed your steps and got it pretty much set.

@naharidavid 13 жыл бұрын

Great vid. The other vid on transmission sounds also helped. I learned that my diff was slipping. Now that I have set up my diff this way and its smooth and responds well. My B4 is like a totally different machine. Have you had a chance to compare the old ball diff with the new gear diff? if so, it would be great to see a tutorial on that too. Keep up the good work.

@SJCxProductions 13 жыл бұрын

this tutorial worked great with my b4.1 and i was wondering if it was possible to make one of these tutorials for a b44.1

@LordValek357 12 жыл бұрын

Very infomrative, I just bought a ECX Torment SCT and I think the slipper was adjusted way too tight from factory and as such my pinion chewed my spur teeth to shreds and started causing slipping, will use this video as my rebuild to-do, thank you

@christopherkouri2317 6 жыл бұрын

Fantastic vid series! Well done and thank you!

@D325460 11 жыл бұрын

Much appreciated thanks again. Bloody manual advising to tighten the diff down all the way on my buggy.

@koonz530 8 жыл бұрын

Just watching your video and you mentioned Mike's. I just wanted to let you know about Banana raceway if you don't already know. Mike is a regular there now and the atmosphere is awesome. Stop by and check it out and thanks for the great videos.

@modbnet 10 жыл бұрын

Aren't you wearing out the ball cup by popping it in and off all the time?

@darrellh487 11 жыл бұрын

Building my SC10.2 (first non RTR) and I was a lacking in confidence for the instructions for the diff build. After watching the video I feel much more confident.

@charlesjensen8908 8 жыл бұрын

Ben, great videos bud. I followed your dif and slipper rebuilds to the letter and am having issues with my RC10T not "popping" when I go to adjust my slipper. It sounds like from forums that it's probably because my motor is a castle 5700kv and is sensorless....what are your thoughts?

@Timfield.42 12 жыл бұрын

does the slipper adjustment work for the sc10 with a v2 slipper?

@0690machete 9 жыл бұрын

hi is this work with rc10 b4.2 coz i try mine it wont go up its just crank sound, is this a prob with my rc or need adjustment? tnx

@New2Kendo 11 жыл бұрын

When setting the slipper I use the bottom of my remote to hold down one of the tires instead of trying to hold both tires and the remote all at once

@DigitalBeatsMX 12 жыл бұрын

thanks, im gonnna do this as soon as i purchase my ball diff for my stock t4.1 :)

@TheRacer53 13 жыл бұрын

@EngageTutorials It's either the slipper clutch needing to be tightened or the diff slipping...

@Tyfooo1 11 жыл бұрын

Don't know if anyone can answer this for me. I build a ball diff for my DESC210. I have built and re built it atleast 4 times now, but everytime all the diff does is slip, I have it cranked down all the way and my slipper nut barely threaded on my slipper shaft and still my diff slips. One of the times my E-clip came loose, but ive check and its fine. Anyone know whats going on?