In this video TJ shows you proper way to set the slipper clutch in your RC vehicle. For more videos, be sure to subscribe and click the notification bell. For more information, visit our website: www.AssociatedElectrics.com/
Пікірлер: 82
@thenowherestairs2 жыл бұрын
Thank you T.A. Back into the hobby after a 25yr hiatus. Awesome.
@MadScience138 ай бұрын
I’m just learning to work on RC’s and this was really helpful! Thank you!!!
@monsterchannel242 жыл бұрын
Great, thank you!
@PnwRClife2 жыл бұрын
Super helpful, thanks! Im pretty confident you saved me breaking parts before I even get started.
@RyanHarrisRC5 жыл бұрын
Nice work dudes!
@adamtroy87393 жыл бұрын
Sensational video. I thought I'd butchered my diff/slipper however this vid and a bit of perseverance sorted it. Thank you so much.
@sammygonzalez76274 жыл бұрын
Thanks for this presentation, others just shows you how too adjust but will not explain why. Great video
@sunsetbashers2 жыл бұрын
thanks for making this! Very helpful! Just got my slipper set! thanks TJ and AE team!
@stevenmercer31615 жыл бұрын
Nicely done Tj!
@tigerone2353 Жыл бұрын
I found this very helpful. A physical way to see clutch action. 🙌
@rileyschmidtyt5 жыл бұрын
These are great videos. Please do more like this.
@jesseortega85984 жыл бұрын
Awesome video! That was very helpful TJ!
@johnband34 жыл бұрын
Incredible info. Thanks for sharing, any additional tuning or adjustments would be great.
@mariowoodsN53 жыл бұрын
Thank you I needed that!
@The29Brad5 жыл бұрын
Thank you. Easy to understand.
@wasabipet67Ай бұрын
Good video THX👍👍
@loganpalfrey56415 жыл бұрын
Let's do proper diff build and shock build please!!!
@MrZimeir5 жыл бұрын
thanks, great video
@tedsimington7654 Жыл бұрын
Thanks for sharing Sir👍👍👍
@dustin68285 ай бұрын
I found this video helpful so I hit the Like button
@allen47794 жыл бұрын
man i loved my rc10gt back in the day i still have a new inbox 10 gt and a gt2 in with people where still into nitro
@BlvlWmpower3 жыл бұрын
I sold my gt2 and rc10t2 (aluminum tub chasis from back when everyone thought a chasis should be as stiff as possible back in the 90's). Now it seems like the car's handle better, but they seem more "flexy", and less durable too, what is up with that??
@philthyco15 жыл бұрын
Good info bro
@waltwalt96324 жыл бұрын
I just switch my RC10 T3 over to a brushless system, the factory slipper can’t handle it, do you know of any aftermarket slipper clutch that will fit my rc10 ?
@terryd1445 жыл бұрын
I purchased a sc10 rtr it has the sc600-bl esc , the truck seems slow. I'm running a two cell wolf pack. (Battery it came with) does this have race mode....ecetra ..ecetra..I guess likes a traxas ...sport , race , beginner ..sorry for using that as comparison..
@ExaltedRC4 жыл бұрын
So I've got a b6d..I'm trying to set this up. I can clearly hear the tone change, but between tone changes and adjustments, it never lifts up the front tires? I thought the car was really slow for 7.5t motor..but I'm brand new to 2wd buggy / racing. Any ideas?
@phillipfrey65972 жыл бұрын
Does this testing method work on all brands of trucks and on 4x4 as well as 2wd
@GeckoRC Жыл бұрын
Hi there. Is this method a good choise for the DR10 Drag Racer too?
@allenaguilar93314 жыл бұрын
Very good
@ridindirtyrc11 ай бұрын
Ty
@littleraptor98984 жыл бұрын
what about ball diff clutches? the clutch on my HPI mini recon is too loose, and how do i tighten it?
@RUZTY13112 жыл бұрын
Mine never lifts up off the ground no matter what I do. It goes around the track smoothly though. Could I need to rebuild the diff already with new balls?
@peersupportcounselor1904 Жыл бұрын
Hi it’s another Tj from West Virginia
@internalrefraction Жыл бұрын
What does it feel like if the diff is notched or pitted
@LordDirus0074 жыл бұрын
I got a HotRacing gear diff for my T6.1
@jooonsRC Жыл бұрын
Does the same set up apply for the trophy rat
@nonexegimonumentum85832 жыл бұрын
Slipper eliminator? What do u think about it?
@jayjohnson48810 ай бұрын
how do you set your truck slipper? im assuming the same method doesnt apply as the truck weight is different?
@WreckinStreetsDaily5 жыл бұрын
What about for the b44.2?
@ozzstars_cars7 ай бұрын
You know what would be good to go with the excellent info you discussed? If you actually pointed the camera at the adjustment screws so we could see exactly what you were doing.
@brianberry5225 Жыл бұрын
OKI broke my different and all that everything worked out good there but when I go to hold the back tires and hit the throttle my motors like rotate and what's going on with that
@RBAERO4 жыл бұрын
What is the best setup for outdoor dirt tracks with lower grip and for high grip?
@modex202 жыл бұрын
This method work on a slash 4x4?
@gigi94672 ай бұрын
So does this only work on ball diff not the other?
@brianberry5225 Жыл бұрын
I watched your video and I see how it's supposed to go but my motors like rotate am I doing something wrong
@TheRabidDoGone5 жыл бұрын
I have the Prosc10 trophy...I have a ???? pinion gears and spurs..I bought a 24 tooth pinion,,not thinking,,now what size spur is needed.. is there a list of matching gears someplace? up and down cause i want to get a 14 also..
@wasabipet67Ай бұрын
Hi ,gear diff. is the same setting?
@markpitts28532 жыл бұрын
So how tight should the nut be as per first build, before adjusting…(manual says flush with end of pin). This is far too loose, I’ve now tightened, no barking but can’t get the front wheels to jump. Don’t want to over do it, or am I being too careful? Does it need to be toghter
@josephdeffendoll30564 жыл бұрын
AWD nitro?
@tonyallen86264 жыл бұрын
I thought if your slipper is set to tight the front wheels would lift a lot more, when you over tightened the slipper the wheels didn't lift at all?
@MX3045 жыл бұрын
Do you set the B64 slipper the same way?
@tjeller93455 жыл бұрын
Yup, only there are no ball diffs to adjust so it's even easier. I set the 4wd so the front wheels come off the ground the same amount as the 2wd.
@superjoint574 жыл бұрын
Does this also apply to a SC6.1 with a gear diff? Thank you!
@RC-ty5ym4 жыл бұрын
This applies to every rc car.
@bis4blair4 жыл бұрын
@@RC-ty5ym No it doesnt
@RC-ty5ym4 жыл бұрын
@@bis4blair why?
@wasabipet67Ай бұрын
HI , RC10B64 Geardiff 2WD, I according to your video , but the car would not putup the front wheel ,WHY ???
@Js_junkyard2 жыл бұрын
what if the motor just cogs when you get it tightened just past the point of slipping?? just guess??
@sigzor3026204 жыл бұрын
When you gonna re release another vintage RC-10?
@STEVOD3135 жыл бұрын
Good info, but what if ur running 4wd?
@STEVOD3135 жыл бұрын
for setting the slipper
@tjeller93455 жыл бұрын
@@STEVOD313 You can set it with the same principal only without the factor of adjusting the diffs. Hold the rear wheels, give it gas, set it so the front wheels come off the ground the same amount as I showed in this video (about 1-2 inches or so)
@grumpy1469 Жыл бұрын
great video. but it would be nice to see everything you are doing. maybe turn the car sideways so it can be seen what you are doing. thanks
@wasabipet67Ай бұрын
Hi , RC10 b64 2wd geardiff. in your video 1:16 but my car would not to popup !I had try to loose and tight nut .!!!!PLS
@loose-hotline50262 жыл бұрын
I like to have it slip just a little on my stampede so I don’t chew out the gears
@KrashKan4 жыл бұрын
shoot most of my cars are so tight they just do a whole wheelie if I try that
@Max-hy9ud5 жыл бұрын
Why do you have a ball diff?
@tjeller93455 жыл бұрын
Because I race on dirt and I like the ball diff.
@Max-hy9ud5 жыл бұрын
@@tjeller9345 is the Balldiff with the MIP Pucks good for 13.5 carpet? (Highgrip)
@tjeller93455 жыл бұрын
@@Max-hy9ud I don't recommend using the pucks on carpet with a 13.5 setup. The components wont last with that much power.
@jeffbryner53554 жыл бұрын
Bark one time and your screwed?like really? There has to be a better design then this lol. I run gear diffs in my sc6 and there just fine
@saltybutsain63483 жыл бұрын
@Gregory Bjorn you totally didn’t switch accounts
@rhinusbreedt97723 жыл бұрын
Whaat..?? rebuild your diff because of those 3 tests.. f.. you are scaring me. What about the slipper eliminator? Doesnt that completely mess up your diff then ? And what about just reversing the slipper shaft and fastening it to the other end? To make space for a fan? Can that work?
@rhinusbreedt97723 жыл бұрын
Aaah sorry was for a ball diff.. makes sense
@dreamer23555 жыл бұрын
This method doesnt work on people running low amp ESC and 17.5 motors
@gigi9467 Жыл бұрын
Geez there has to be a better way especially for newbies
@terrya4502 жыл бұрын
The manual says to oil the clutch and I know that's not right team associated sucks...