How to Properly install a Oil Catch Can On a race car (Radium Engineering VTA)

Рет қаралды 1,460

Күн бұрын

Пікірлер: 19

@3rdGenGuy Ай бұрын

SO I've done few track days with this 1qt catch can. and 5x 20min sessions will absolutely fill the catch can up. so the big can is a good choice for track use.

@dyskyzed 2 ай бұрын

Love your videos! They've really helped take the intimidation out of doing projects on my car. Thank you!

@tonym6854 3 ай бұрын

I'm confused. With no vaccum source ie routing to the throttle body, how exactly does it work???

@klynsma76 3 ай бұрын

its venting the excess crankcase pressure, don't really need a vacuum source to pull it out.

@tonym6854 3 ай бұрын

@@klynsma76Understood. I know you said that it would smell a little but I didn't really see a vent so there is my confusion

@klynsma76 3 ай бұрын

@tonym6854 oh that wasn't me lol. But, it's a neat catch can you can hardly tell it's vent to atmosphere.

@3rdGenGuy 3 ай бұрын

Autocross or road racing has basically Zero vacuum available. the intake at WOT has 0.0 vacuum, so you have to get crankcase gases out by venting. even the intake tube has almost nothing vacuum wise. 3/8 lines aren't big enough to -10an (5/8) is used. that can is a full race can, has drawbacks on the street, but also Pros at a track

@tonym6854 3 ай бұрын

@@3rdGenGuyMakes perfect sense. My stuff is street performance so I never really thought of wide open throttle nearly constantly.

@SlipperyDry 3 ай бұрын

Consider changing the oil cap to a swivel fitting as well. Makes removing the oil cap to add fluid much easier. Otherwise you have to loosen the hose each time

@3rdGenGuy 3 ай бұрын

not a bad idea.

@MrSpartanPaul 3 ай бұрын

Love the in-car cam. Seemed fast to me. Any road courses nearby?

@3rdGenGuy 3 ай бұрын

I have a few local tracks I occasional go to.

@jhuntosgarage 3 ай бұрын

In my next video, I install wings, a jet engine, and take Elon for a ride to Mars. Yeah, I could see that. Nice work! Thanks for sharing.

@greasemonkeygarage1896 3 ай бұрын

You could save a few grams of weight and strengthen that bracket by drilling a hole in it and “dimple dying” it just a thought ! 🎉but she looks really nice bro !

@kurrentracing 3 ай бұрын

I was looking for the link of the catch can and the adapters

@3rdGenGuy 3 ай бұрын

www.radiumauto.com/VTA-Competition-Catch-Can-P2449.aspx www.radiumauto.com/Low-Profile-Swiveling-Banjo-Fittings-P1355.aspx I'm also not sponsored I just like Radium stuff.

@kurrentracing 3 ай бұрын

@3rdGenGuy I loves the setup bro. Very professional looking and easy.

@kurrentracing 3 ай бұрын

@@3rdGenGuy ima have to rewatxh your video to see what all you bought lol