How to properly set up your Timer Resolution (LOWER INPUT DELAY, BETTER FPS, AND MORE CONSISTENCY)

In this video I'll be covering how to use amit's tool for measure sleep and his benchmark script to actually use Timer Resolution properly and which versions of Windows timer resolution works on and which versions timer resolution DOES NOT work on.
Timer Resolution Pack►drive.google.c...
Powershell command► "Set-ExecutionPolicy Unrestricted"
Graph Visualizer►chart-studio.p...
Shortcut Target command► " --resolution 5000 --no-console"
Amits Github►github.com/ami...
|-----------------------------------------------------------------------------------------------------------------|
🖥️ Want MORE FPS and ZERO INPUT DELAY ? Book my service below
👇
xilly.net
►Join my discord server: dsc.gg/xilly
►Follow me on Twitter: in...
►Follow me on TikTok: / x1lly
►Follow me on IG: / xillyservices
►Subscribe for more: www.youtube.co...

[@Xilly]

As mentioned in the video, windows versions that are NOT Windows 11 or a Windows 10 version that is 2004 or ABOVE will NOT be able to do this. The Measuresleep program will just give you the 15.6250 ms resolution every time regardless of what you run for Timer resolution or for the benchmark. Switch to Windows 11 and apply the registry fix if you want to continue with this video or go to a Windows 10 version that is OLDER THAN 2004. Heres an article explaining why Timer Resolution changed and why it does not work basically, Amit also explains it on his Github: randomascii.wordpress.com/2020/10/04/windows-timer-resolution-the-great-rule-change/

[@malenabzedm.823]

do u use windows 11 now, or only for the sake of this video.

[@eternalvoid6691]

imagine not using win11, considering that win10 will soon no longer be supported by Microsoft and its also has less options and potential for perfomance tweaks.

[@phoenix3510]

does this setup works for controller connected on pc too?? or it's just for mouse and keyboard

[@eduardoantezana5594]

I set .5680, and when I open MeasureSleep it still says .5000 it doesn't change.

[@Sk4nnFN]

got the same problem

[@MrGery12]

i have spikes of delta, what can i do for improve ?

[@clutch7z]

Did anyone else get an issue where the deltams is as high as 14.000 I still set it to the lowest on the graph though? I wasn’t getting delta Ms as low as 0.05

[@Bindx0]

Same here

[@ngltube]

same...

[@РОЅТ]

thats because u didnt restart after using the registry file

[@teri.]

what if no matter what value i use, the delta and sleep always spike up?

[@Jessebaum]

mine just staying at 15 like my delta

[@jqsoon7487]

so, lowering ms with timer resolution better fps and input lag? can we see before and after? Thank you...

[@mao_shiba]

IF YOU'RE PLAYING COD OR VALORANT DO NOT DO THIS. It will fuck up your timer and delta values and starts jumping around back and forth unless you stabilize it with only .5000 and not .5070-.5060 etc. I still think it is a useless feature if it means that the game will just force other timings. Disable it immediately if the game just forces itself. It's a desync function at that point.

[@RaulAlcala-j9v]

do you know how to reverse it all back to default?

[@pe3oxide]

Wth u talking about its just timer res it makes ur game smoother💀

[@laffenthecat]

im always getting 15ms dosent matter what delta i try my windows version is 19044

[@LukasGaz.444]

bro had 28% packet loss at the start 😂💀 also.... why did you put a password to the zip file, seems a lil bit sus ngl because then the antivirus cant detect if it is a virus or not because it is encrypted with a password?

[@goodgodtim8765]

whats pass bro

[@LukasGaz.444]

@@goodgodtim8765 ?

[@Zorc_]

my current resolution is 0.499 and on my pc that is better then 0.5 ive tried both and 0.499 makes everything feel faster and less delayed but everyone says 0.5 is better

[@megatron2.2]

Every pc is different, 0.5 is just a measurement for you too start testing. If that specific number works for you, keep it.

[@mounsterakiradurif9815]

0 51

[@toshdeluxehori3.793]

don’t go off of feel, go off of benchmarks

[@azallore]

i have spikes of delta, what can i do for improve ?

[@Emil09985]

pls don't give me a virus🤣🤣🤣🤣

[@JimBarkerW]

instructions unclear, runnning the first powershell command didnt show anything like what showed for you

[@jonathanmoreira8930]

can you make a video on how to stress test your pc for stability

[@nomustachemanhunter2605]

does this work on Windows 11 home because when I click A after pasting in Set-ExecutionPolicy Unrestricted" I don't get the same thing you do. Also when I tried to do the micro adjust benchmark I couldn't do it because it was blocked or something

[@cursedimageseveryday5559]

No matter what I do I still get those hiccups to 0.5 So I am just going to put it to lowest value and enjoy the placebo it gives me 😃

[@user40193]

Eu coloquei apenas o codigo no power shell e funcionou

[@KerwynPromoter]

I need u to check my pc my pc for me is it possible?

[@druery.]

i wouldnt mind doing all this, im just worried about any virus’ or sum, ive had bad experiences with these kinda videos 😭

[@laffenthecat]

his videos are legit been watcin for a while

[@druery.]

@vxkxrz2758 some programs especially ones like this come up as virus’ cause of what they do, i have a roblox client that comes up as a virus on most scanners but its completely clean

[@jinxiana]

hes highly trusted throughout the whole optimizing community, i promise viruses are the least of your concerns

[@setolex]

always make sure the content creator is legit and has a discord or something to communicate. a lot of scammers just buy views and subscribers to make you think that they’re legit but I vouch for Xilly he knows his shit and the ppl who hate just dont do his tweaks right or have outdated hardware that need different tweaks. don’t be a noob, learn from your mistakes and get more knowledgeable on your pc

[@Torshfps]

@vxkxrz2758 false positives

[@eternalvoid6691]

I get 0.4-0.5ms "hickups" every 3-5 benchmark string, with every "best" timer for my pc (tried almost every reso from 0.5 to 0.7) I also running games in 1440p with smooth 220+avg fps on ultra/high settings so.. idk why do i even care.

[@Gaetan.N]

Edit: Hello Xilly thanks for the guide, very thorough. It does work and helped, however « measuresleep.exe » and « settimerresolution.exe » are both corrupt with potential threats according to virus total.. i will use latest version of ISLC which allow now for 4 digit timer res and changes the same reg edit also Original : My lowest was 5040 but std dev of 5220 was the lowest standard dev and had much less spikes when testing myself after! Thanks Xilly

[@MUST32Musto]

nice malware

[@h3ro365]

how to undo this shit?

[@lukeskyvodka2999]

every new benchmark test i have always different results, is it normal ?

[@FPPADD]

same you fix it bro?

[@loyal_sheperd]

i get 14ms deltas with 15ms sleeps with an i7 8700 and a GTX 1080 + 16gbram. Help.

[@guizanikalil]

mine was 14 ms xdd

[@klaczeq]

i have 22h2

[@Z1RE_]

Mine is already on my windows 11 also I put mine to 1microsecond lmao as it’s different as I didn’t use xilys program and my game does feel much faster even my sense feels faster on a 5 mw3

[@baltoyx2999]

dessa forma realmente obtemos o melhor valor? fiz o benchmark algumas vezes, e tive resultados diferentes como 0.5040, 0.5060 e 0.5080. em 0.5040 o delta time fica valores altos de 0.5 a 0.52, em 0.5060 pega valores de 0.007 a 0.0140 mas com variações para 0.5ms e em 0.5080 o delta recebe valores de 0.0140ms a 0.03ms com mais raras variações para 0.5ms que o valor de 0.5060. estou testando diferentes valores e o valor que se manteve com uma variação de delta de 0.02 a 0.04 com muito rara ocasião de 0.4ms foi de 0.52ms

[@stompchomp]

when i set the value to 0.500ms, then i close it and reopen it up its back at 1ms, any fixes?

[@RabY0]

Thanks man. This was very easy to follow. I went from 1.5 delta's to 0.0. It's insane what a difference it makes.

[@GtixxV]

i got blue screen during the stress test

[@jameyt1]

Your PC is unstable then. Probably too much/too little vcore or your cooling is trash

[@zenky5939]

my timer res worked better when it was 496, since i have 500 it seems like it isnt working

[@Bindx0]

My Delta values are 14, what did I do wrong?

[@vasgue0037]

same

[@Patrick_AV]

SCAM!!

[@XardasThe3rd]

Does anyone know why when I launch mw3 the timer resolution turns back to 0.5000 and doesn’t stay at the value that I set it?

[@XardasThe3rd]

I’m on the newest windows 11

[@territoryes]

it's just cod's settings you can't change that

[@MKBOYKA]

me too, is there a fixe ..?

[@user-p3d9r]

i got .622 what shouild i put someone pls???? is it 6220?

[@FrozenCha0]

hi have done every step but for me the resolution stay at 5000ms when i open the measuyr sleep can you help me?

[@lethalisliv9915]

same

[@pedro6247]

Is it worth exchanging windows 10 for 11?

[@moviesshorts423]

i got around 14.20 etc deltams , i suppose its because i m using old monitor which has 15ms response time so deltams cant get lower then that

[@xjazua]

my delta always spikes to .5 no matter what resolution on the graph i try

[@erraticfn]

Same did u ever figure it out?

[@depralexcrimson]

@@erraticfn yeah i figured it out, basically you have to try and switch USB ports for your devices until it doesnt happen anymore, try switching locations / back/front etc, make sure you try all combinations but after you change the USB port for a device you have to reboot the pc and no, not reboot, but shutdown and then start it back up, dont touch it for like 5 mins and then try see if the sleep spikes to .5 if it does, then swap the usb ports for each device again, until you shuffle to a proper setup that windows can deal with. If all fails, try resetting CMOS battery and then try reshuffling the usb ports your devices are connected to, sometimes even re-seating the GPU, booting with no gpu, then re-seating it back on will help windows assign different IRQs for the devices. took me a couple of days but now I'm owning (i'm unreal).

[@BuzzForex]

@@depralexcrimsonthis even could be the problem because why my pc framelags without reason(is not a bad pc)

[@BuzzForex]

@@depralexcrimsoni tested the latency while gaming and sometimes i got spikes of 0.5 on delta, but without games open my pc didn’t have any spikes, did i have to try the usb method? or its alredy good?

[@OdieTheGreat]

@@depralexcrimson how did you figure this out?

[@ninjakuroko9371]

mine is 22h2 will it work?

[@Xilly]

no

[@zenky5939]

my resolution isnt changed its stuck to 5000 i changed it in the shortcut and its still the same

[@wmcreynolds92]

Im showing it default from optimized value from graph to .50 res shortly after startup while running measure sleep. Any idea why this is?

[@WrldXC]

better vids bro u made this one alr

[@Aclors4]

Is timer resolution working on 22h2?

[@renko8065]

yes

[@JackySerge]

why this video looks similar to the Khorvie's Video and you said this is the only video on the youtube (in the intro)

[@Rukqsi]

😿

[@ganstta9642]

Is it normal that when Fortnite opens the Delta rises to more than 1.0000?

[@tylero8022]

Why doesn’t the micro adjust cmd work?

[@Serdf.]

Mine is 0.5060. Does it make me lower the input delay and the ping, and makes it smoother?

[@fucisu]

mines 22h2 will it work

[@zCryeReal]

no. I have developed a driver with which it is possible, but not usable without a certificate.

[@yudhaputra8232]

hallo i use windows 11. if i run this timer resolution. program need new instal. how to fix it?

[@williamniurulu5070]

When I enter micro it doesn’t do nothing?

[@williamniurulu5070]

When I enter micro it doesn’t do nothing?

[@ggbpb3249]

Do I turn off the high-precision event timer in the device manager? and bcdedit /set disabledynamictick yes bcdedit /set useplatformtick yes?

[@pe3oxide]

Yes

[@gollumblindguardian]

what is the easiest way to undo all this? i want to undo it and redo it again , because i forgot to measure how it was before.

[@gamezone-NL]

i have 0.02 now thankyou

[@akel1969]

i got delta 15 and i tried many others any tips?

[@BlakePlayss]

why the FUCK do u go so fast

[@gamehopper111]

omg xilly thank you i got 1.01 nice!

[@nagiaoe2434]

Dude deleted his github or made it all private

[@coek.]

i am NOT using windows 11

[@gamt4192]

If you set a number between 0,5068 - 0,5073 in Win 11 22H2 you gonna get better results without using all this

[@RvPGaming29]

how about in win10?

[@gamt4192]

@@RvPGaming29 win10 is broken. Doesn’t work for low input delay tweaks

[@manosmixelakis6816]

i have windows 10 2004 and it didnt worj for mne it says ime 14k delta and 1.5000ms may anyone help me ?

[@saber069]

He said it works for versions below 2004

[@DemDemDeBariz]

21H2 ENTREPRISE LTSC BUILD 19044 can work?

[@Iootsu]

no

[@fraez]

yea it does NOT say that after pressing tab

[@gamehopper111]

Is there a different cpu stress test apps other than prime 95?

[@hhh-u7g]

Fies Have passwords...

[@Stackmodechris]

it needs to be a 100k a month today!

[@swyrzexswyrzex7838]

i got 0.554 how do i put it in

[@abdullaelmohamady7477]

the benchmark is not working in powershell 5:03

[@Delujjo]

Thanks Xilly. Funciona de maravilla :)

[@AndersonFlorezGomez]

me podrias ayudar?

[@Demonbby201]

how to put 0.724 in

[@Uknow-_1337]

7240 but to me that looks weird. Cause that number is way too high

[@HartFalleon]

Can you detail or give the path that your script is editing in the registry, in case I want to delete it or undo it? I know doing a restore point would also suffice, I just would like to better understand what a thing I'm clicking on is changing in the OS registry.

[@snail_is_slow]

U can just open the reg file with notepad and see what it is changing 🤣

[@whattheperk1799]

Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\kernel delete the GlobalTimerResolutionRequests if you want to revert

[@xSoyLeo]

this works in valorant

[@s7hu9494]

well worked for me thankyou 👑

[@CronusTheGreat]

excellent vid!

[@Nedim618]

what if i get 0.5

[@RAWDOG963]

whenever i restart my pc it goes back to 5000... please help

[@Seras1k]

why is this dont work it is always 15ms not 1ms

[@Seras1k]

solved i changed from win10 to win11

[@-NZY]

islc or time resoultion?

[@grayMMO]

password ??

[@berettaplus3195]

One question i have 0.506 and 0.098 should the value be like this, --resolution 5006 --no-console or --resolution 5600 --no-console

[@Xilly]

5006, 5600 would be .56

[@berettaplus3195]

@@Xilly 0.506 = 0.5600

[@Uknow-_1337]

No .506 is 5060

[@ixfrozensnipzxi1010]

YOO is my cpu suppose to be at 99% ????

[@Sus_Bak]

If you are doing something Heavy then it's alright

[@ixfrozensnipzxi1010]

@@Sus_Bak 99 degrees? Too while doing the test ? I didn’t crash but I restarted in case nothing happened

[@-1up26]

@@ixfrozensnipzxi1010 If you dindn't crash then its a good signal, its normal those kind of temps in a really heavy load scenario like prime95.

[@Xilly]

its a stress test, if you are running it, yes

[@ixfrozensnipzxi1010]

@@Xilly I did that tweak and my games run better feel a lot better idk why

[@mounsterakiradurif9815]

52 IS ALL PC

[@XhenzuRam]

thanx bro..appreciate it ;)

[@setolex]

didnt you upload this video yesterday? or was it a dream lol

[@Xilly]

It was a short not a guide

[@shockat5070]

did anyone even test this? does this really lower your input lag or its some kind of myth people keep doing for years without even checking what it does

[@RoyGaryGaming]

Yeah there are multiple tests done by the likes of Savitarax, Khorvie Tech, etc. I used to think all of these tweaks are not useful at all but I've noticed a very nice difference on input lag with the tweaks applied.

[@RoyGaryGaming]

That being said you should always have registry backups and system restore points in case anything goes wrong.

[@shockat5070]

@@RoyGaryGaming i have atlas os installed and optimised with boosterx software and r7 7800x3d, do you think this can really help me? last time i've done such optimisations my game started to crash

[@RoyGaryGaming]

@@shockat5070 I'd recommend not using auto tweaker software and instead do everything manually, in increments to reduce the risk of crashing. I learned that the hard way.

[@RoyGaryGaming]

@@shockat5070 I'd recommend not using auto tweaker software and instead do everything manually, in increments to reduce the risk of crashing. I learned that the hard way.

[@ayobrohaha]

what for 0.606?

[@Sus_Bak]

What's Timer Resolution btw ?

[@clutchyclutch263]

It can reduce input lag, microstuttering and improve FPS for various games, especially online FPS games.

[@Crextures]

Hi papa

[@Kudox.]

why does my pc restart and say it ran into a problem everytime I run the stress test?

[@Iootsu]

he said in the vid that its something wrong with ur cpu or thermal paste and u gotta get it replaced

[@berettaplus3195]

I had this problem too but I restart and did it again and np

[@Xilly]

Your CPU is unstable or RAM, or its overheating, this is an issue you have to look into rather than following this video in my opinion

[@Kudox.]

@@Xilly yeah i think it did that cuz it kept asking for permission to open the file during the test so once i just gave it permission to open it everytime it didnt crash or nothing and the test worked and my pc has good specs and was a prebuilt that i got 5 months ago so yeah just in mind if anyone had the same problem as me

[@opnova_gg7601]

What do I put mine is 0.648

[@druery.]

6480

[@tonio._o]

capet goat

[@kawleyy5935]

mine is 0.514 what do i put

[@Uknow-_1337]

5140

[@aaronsadventures7739]

What about for the latest Win10 above version 2004?

[@fawazhusayn]

It'll only work on Windows 10 Versions that are below 2004 or you can just upgrade to windows 11 if you can.

[@aaronsadventures7739]

@@fawazhusayn Yes I understand that, which is why I am asking for Win10 newer version tweaks.

[@fawazhusayn]

@@aaronsadventures7739 ion think there's any atm

[@Wxnzeler77]

Mine is 0.506 so i put 5006 or 5060 in shortcut command?

[@zshadyy2322]

5060

[@Z29ek1]

5060

[@evanfn23]

wrong. it does work on windows 10

[@evanfn23]

with a couple simple steps

[@jameyt1]

is there any other way besides dpclat? Dpclat adds interrupts to the CPU so it’s not an end all be all solution

[@Cherry-C]

ISLC