How To Put In A Drill Bit and Take It Out!

[@chontecolvin8387]

Thank you so much for this video. I lost my husband to cancer 6 months ago and he never got a chance to show me how to use the drill.

[@billy-boyplays8180]

Oh wow. Thank you so much for watching my videos. This is the reason I do these how to videos on my channel. God bless you and your family and may your husband Rest Peacefully. This touched my heart that I was able to help you. Feel free to contact me if you need help with any other around the house projects or questions on tools. ❤️❤️❤️

[@juliachu9633]

Sorry for that!

[@jacobparamus1229]

Sorry for you loss

[@niaakk]

Thank you so much!!! This is the only video that covered the actual problem in a clear simple demonstration.

[@billy-boyplays8180]

@@niaakk thank you very much!

[@dorianamanda]

This helped me so much! I thought I was missing a piece and was ready to return it. The directions were crappy. Thank you!!

[@billy-boyplays8180]

@@dorianamanda you are very welcome! Thank you for watching!

[@smokeynedith3555]

I am a recent widow who kept some of my husband's tools, including a power drill. I had no idea how to put in and take out drill bits and have no one to show me. After searching for a channel that teaches this I finally found yours. Thank you so much for helping me. I bought a squirrel feeder and needed how to hang it to the tree. You're a lifesaver. Thank you again.

[@billy-boyplays8180]

Thank you so very much for the comment. I’m sorry for your husband’s passing. Comments like these are why I make videos like this. God bless. ❤️

[@teeWixkk]

I love KZbin because of people like you! Great video keep up the good work God bless you sir.🙏🏾

[@billy-boyplays8180]

@@teeWixkk thank you very much! I love KZbin for people like you as well. God Bless you!

[@QueenofWands3333]

Thank you, Sir. Your straightforward and accurate explanation was worth more to me than gold today. I applied it immediately and now I guess it's time to go scrub the tub since I used my brush attachment. Later on today it'll be floating shelves. I feel nearly invincible 🤦🏾‍♀️😂😂. Thank you again. ❤

[@billy-boyplays8180]

@@QueenofWands3333 you’re very welcome. Hope you get everything done that you need to! Thanks for watching and commenting!

[@trishsaid254]

Thank you so much, couldn't remember how to get the bit out. Your the best. I tried 2 other sites yours was the most clear and concise. Thanks again Trish

[@billy-boyplays8180]

Thank you so very much for the kind words!

[@cheymorales6444]

Thank you so much!! It helped me out a lot. Didn’t have a dad growing up so this is important to learn

[@billy-boyplays8180]

Thank you for the kind words! That’s the whole reason I’ve been making these type of videos. I didn’t have anyone show me a lot of what I know. It was frustrating to say the least. Be on the lookout for more how-to and tutorial videos. Thank you for your comment and for watching!!

[@piwacketspurtyshack]

Thank you for this. I have been waiting for months to start hanging things in my house and finally said enough! I watched your video and had the bit switched out in less than a minute. God Bless ♡

[@billy-boyplays8180]

@@piwacketspurtyshack you are very welcome! I hope you got your decorations up! Thank you for watching!

[@christinep1679]

You are a great teacher! I have a new drill but even with the written instructions I couldn't figure out the whole drill bit thing! Then I discovered you and I can use it as it should be used! Thank you, thank you! Stay well, stay safe! 😉🇺🇸

[@billy-boyplays8180]

Thank you so very much for the kind comment. I try my best to make things as clear as possible. There was a point where I didn’t know how to do these things, so I try to help everyone and be super clear. Stay well and stay safe!

[@dhcteacher]

Thanks so much! This actually makes sense to me now (I’m a visual learner). I’m also a 66 yr old widow doing house/garden fixes by myself, so this video was very helpful.

[@billy-boyplays8180]

@@dhcteacher so very glad I was able to help you! Thank you!

[@chris-dp4he]

Thank you so much for this short but straight to the point video. It has helped me in getting my work done this night.

[@billy-boyplays8180]

Awesome! Thank you so much for watching and commenting!

[@juliachu9633]

Wow! It’s really helpful! I just have craftsman drill , out battery, I want change it to the power one , but I try however way just couldn’t take the bit off . Now I understand! Thank you !

[@billy-boyplays8180]

@@juliachu9633 you are very welcome! Thank you for watching!

[@dmmamc]

Thank you so much! Your instructions are easy to follow for the average beginner!!

[@TamraGreen]

Thank you for showing me how to connect the bit. I really appreciate it.

[@janiceporter3540]

Thank you. Your video was easy to follow your instructions.

[@billy-boyplays8180]

Thank you so much!

[@officiall._daedae]

I really appreciate that beat I'm in a electrical class and we were assigned to build replica of a kitchen and i was really struggling to use the drill

[@queenhickman5971]

Thanks for sharing, I just bought this tonight and was confused how to put the bit in, Thank you so much for your info

[@billy-boyplays8180]

You’re very welcome. Thank you for watching and your comment!

[@queenhickman5971]

@@billy-boyplays8180 you’re very welcome

[@brendathompson2288]

Thank you so much. I was tearing my hand up having the drill set in the wrong direction, and holding the wrong part of the drill. 😆 🤣 😂 I appreciate your help and smooth manner.

[@billy-boyplays8180]

You’re so very welcome! Please be careful! These things will twist your fingers up fast 🤣🤣. Thank you for watching!

[@tammylynnmitchell6121]

Thank you soooo very much for your help Billy Boy. I didn't think things would be this hard to figure out on my own. This is my first time trying to use a drill by myself. Yes, I am a girl who is going to get this. Just please be patient with me. Thank You, Tammy😊

[@davensoncyceron215]

Thank you so much man. I've had my drill bit stuck for the longest time. And was trying to find out why. And you helped me out Big time. God bless you. Thank you again. 😊❤

[@billy-boyplays8180]

Glad to have helped you! Thank you so much for the kind words and taking the time to comment!

[@LinhLe-mw6nk]

Thank you for your video to help me how to use it. I just bought it . Thanks again !

[@billy-boyplays8180]

Thank you so much for watching! I’m glad to be a help!!

[@chamber5124]

This really helped me. Thank you so much! And you're right, this drill is a good size for a woman. I also showed my 11 year old daughter how to use it.

[@billy-boyplays8180]

Thank you so much for the kind words. This is the very reason I make these videos. I want to help women and children feel safe around tools and know how to use them!

[@michelle1885]

Thank you so much! I have know idea how to use a drill! I’m glad I found your video👍🏻

[@billy-boyplays8180]

You are very welcome. Glad it helped you!

[@jeanettemarquez8179]

Thank you so much! Now I am always using a drill but this is a different one and I couldn’t I couldn’t open it up but thanks to your video I got it!

[@billy-boyplays8180]

Awesome! It makes my day to help someone!

[@WALbaby09]

Very helpful and straight to the point. Thank you.

[@billy-boyplays8180]

Thank you for the kind words! Thank you for watching!

[@roachjuice5222]

Awesome video, it saved me a lot of time. Thanks! 💯

[@billy-boyplays8180]

You are very welcome! Thank you for watching!

[@juliechatar5241]

Thank you for this simple video! Finally!! Other videos didn't explain it the way you did to us females.

[@billy-boyplays8180]

Thank you so much for watching and your comment! I’m glad this helped you!

[@mrstt5783]

Thank u so much I was getting ready to return it and tell them I'm missing a piece

[@tabassumema5868]

Ur video is very helpful,i just figure it out myself by saw ur video

[@billy-boyplays8180]

Thank you very much!

[@michelemarch8270]

Thank you for going slow and showing up close detail. That’s rare in youtube videos. And that is what is helpful. 👍😊

[@billy-boyplays8180]

Thank you so much! I appreciate you viewing my video and the comment!

[@DellaArchuleta-l6m]

I was just going to ask that question on the other video PERFECT.😀

[@billy-boyplays8180]

Thank you so very much! I had seen where others were having trouble and I wanted to help even more. Thank you for watching and the kind words!

[@haileyalex]

Thank you! I don’t have to wait for my husband to come home and hang up things for me. I was trying to do it by hand and couldn’t figure it out. Lol

[@billy-boyplays8180]

@@haileyalex lol. No worries. Thank you for watching and your comment. Hope you get everything you need on the wall!

[@vialovesfn]

this was so helpful and he explained it perfectly ❤

[@billy-boyplays8180]

@@vialovesfn thank you very much!!

[@allthingspossible3761]

Saved me! Thank you for this video!

[@billy-boyplays8180]

You are very welcome! Thanks for watching!

[@fleamarketthedj]

You just saved my day. Thank you.

[@billy-boyplays8180]

You are very welcome! Thanks for watching!

[@manuoz3545]

awesome mate, you have helped me do that, I was suppose to return it thinking wtf its so loose, I cant fit the drill bits and thought I bought a wrong bits, your video helped a lot. Cheers. You can teach how to drill holes on walls and wood etc in your future videos. :)

[@billy-boyplays8180]

Thank you so much for the kind comment. That is a great idea! I’m also thinking about doing some videos on vehicles and maintenance. Thank you so much for the feedback.

[@korriepayne8697]

Thanks for the tip!

[@billy-boyplays8180]

You are very welcome! Thanks for the comment!

[@Louisianasfinestshay]

Great review, now I know how to use this

[@kristenblack5564]

Thank you! You rock!!

[@billy-boyplays8180]

You’re so very welcome! You rock as well! Thanks for the comment!

[@cheyenneallison2833]

Thank you it really helped!!

[@billy-boyplays8180]

Thank you! Glad I could help!!

[@thesignaturegroupLIVE]

Thank You so Much !

[@billy-boyplays8180]

You are very welcome! Thanks for watching and commenting!

[@AnomaLeOverT.I.M.E]

THANK YOU SO MUCH 💚💚💚

[@billy-boyplays8180]

You are very welcome. Thanks for watching!

[@Marshas_Journey]

Thank God for you, you just tough me how to put a drill bit in. I'm sure I'll have to go back to your video again at some point. Now I gotta figure out how to take these blinds down. They different then the ones I've had in the past.

[@ColorMeekBaddd]

Thank you🙌

[@billy-boyplays8180]

You’re very welcome!!

[@mamanewman5975]

I DID IT!!!! ALL BY MYSELF!🎉 THANK YOU BILLY-BOY❤

[@billy-boyplays8180]

@@mamanewman5975 that’s awesome! Thank you!

[@Roxys_budget]

Hey just wondering if you have a video where you're showing how powerful it is I'm looking into purchasing one😊

[@billy-boyplays8180]

I don’t have a video of the power yet, but I can recommend some powerful brands if you’d like. That’s a good idea for a future video! DeWalt is one of the most powerful, Kobalt from Lowe’s is a good powerful brand as well and much cheaper than DeWalt.

[@babbab562]

Thanks for sharing

[@alwayslele27]

❤😢Thank You So Much for this VIDEO 😍

[@09NOVATA]

I'll try I have many things to do in my shed.

[@billy-boyplays8180]

@@09NOVATA best of luck!

[@debipoutre1673]

Thanks !

[@billy-boyplays8180]

@@debipoutre1673 you’re very welcome!

[@jonig9357]

Thank you ❤

[@billy-boyplays8180]

@@jonig9357 you’re very welcome!

[@tatumhobbs3038]

THANK YOU

[@bethaedwards2296]

Found it but mine don't spin was wandering if it needs to be charged more. I just bought it the only I used one before it already had a bit in it. I'm 65 and no one here to help. Thank you for your tutorial to help people like me

[@billy-boyplays8180]

No problem at all. It sounds like it’s dead. You can either charge it and follow the steps from my video, or you should be able to hold the top piece as I show here, and manually twist the other moveable piece at the top to loosen or tighten the bit. It is an honor to be able to help you and is the purpose for me to make videos like this. I never had someone to show me how this all works and have taught myself. So I figured I’d try to help others. Hope you have a great evening!

[@gordisbella719]

How do I release the black piece holding the nails in. Does the drill need to be battery charged and working to actually remove it. I just wasn’t to take nails but i feel lost with this thing. These are Milwaukee drills . One with no charge or power is the DriverDrill that has that black piece holding the nail that the one that is functional is naked and without one. I assume the Impact Drill would also need the same to undrill my nails . Correct? If so what to do???

[@billy-boyplays8180]

Do you mean the drill bits? If you are, the drill being charged would help you out a lot. You flip the switch to run it in reverse, while holding the black piece at the front of the drill. If it’s not charged, you can hold the black piece at the front of the drill like in this video, and manually twist the part the spins at the top. I hope this helps. Watch in this video how I take these out. If the drill isn’t charged, put it in the reverse position and manually twist that piece that spins at the top.

[@rubieallee]

Thank you. Very easy to follow. What if you want to take a screw out? 😢

[@billy-boyplays8180]

@@rubieallee you would put the bit in that you need (either flat or the cross style-Phillips) with my instructions in this video, then flip the switch near the trigger to the reverse position, and unscrew the screw. I hope that was clear enough for you. Thank you for the kind words as well. 😁

[@rubieallee]

@@billy-boyplays8180thats what i thought. But when I switch it to reverse to take it out, the bit loosens.

[@billy-boyplays8180]

@@rubieallee okay, so when you switch it to reverse to drill, don’t hold the end as I do in this video. When drilling, you shouldn’t touch the end that locks the bit in place. You only need to do that when changing out the bit and that’s all.

[@monicamills9088]

Thanks

[@belindalindahl7256]

What are the numbers for 1-21 on my 8V drill?

[@billy-boyplays8180]

Those are called torque settings. 1 is the lowest and 21 is the highest. Depending on what you are drilling and the types of screws you are using, you can go higher or lower.

[@JazAmara]

You’re a lifesaver for us women

[@billy-boyplays8180]

@@JazAmara thank you so much! That’s exactly why I made these videos. Thanks for watching!

[@JazAmara]

@@billy-boyplays8180 you helped me take my daughters bed down now I’m On my way to take down an old couch both are going to the dump been trying to get them out foreverrrr so again thanks so much keeep posting

[@ragelorenz2776]

I'm trying to figure out how to keep it locked it

[@billy-boyplays8180]

Okay so all you need to do is put the drill to go into the forward position by flipping the switch by the trigger. Now hold the black ring around the tip and it will tighten up.

[@carloss7557]

Correct me if I am wrong but can I drill a hole into a dry wall with this?

[@billy-boyplays8180]

Yes you can! Depending on if you’re hanging something, you might want to find a stud in the wall, but you can drill a hole into drywall or a stud with this.

[@SunflowerFlowerEmpire]

Why is that a drill bit when clearly it's a screw bit? Can you use regular drill bits to like ya drill holes isnthay possible with this unit???

[@KiaLindsay]

I’m having an issue with mine. It’s not allowing me to release my drill bit, does that mean it’s broken?

[@billy-boyplays8180]

@@KiaLindsay no, so to release the bit, make sure the drill is in reverse with the small button by the trigger, hold your hand on the black plastic on the end of the drill and press the trigger. If the drill isn’t charged enough, you can manually twist the drill end in a counter clockwise motion to remove it. Hope that helps

[@ezerica4yah330]

😅THANK YOU LOTS😂

[@judahlion3330]

So this drill did not come equip with a drill bit correct?

[@billy-boyplays8180]

This specific drill didn’t come with the bit, no. I had bought the bit separately. But sometimes you can find drills packaged with some drill bits. Usually most come with a bit that has a Phillips end and a flathead end on each side. But don’t bank on that. Buy a few that you need just in case. Check the packaging of the drill to be sure. I got this drill used, so it didn’t come with anything but the battery and charger.

[@judahlion3330]

@@billy-boyplays8180 thank you Sir I found that piece, can I drill directly into wood with the Phillips screwdriver end of the bit?

[@billy-boyplays8180]

@@judahlion3330 no, if you are wanting to drill a hole, you will have to get a different type of bit. The bit you will need will be a long cork screw shaped piece. Around 3-4 inches long. An alternative, you can use the Phillips bit if you are using screws. That method you can simply put the Phillips bit in, hold the screw where you want it, and start applying the power of the drill. If you try to use the Phillips bit directly into wood, the hole will not look good and it could ruin your Phillips bit.

[@abunawelcome4221]

I don't understand mine isn't going in I tried and tried.. thanks for the tutorial I guess

[@billy-boyplays8180]

Have you ran it in reverse while holding the end to loosen up the spot that holds the bits? After that run it forward while holding the end to tighten.

[@abunawelcome4221]

@@billy-boyplays8180 omg it actually works thanks for the help man

[@billy-boyplays8180]

@@abunawelcome4221 no problem at all! That’s what I’m here for! Thank you for watching!

[@smizzysogodly1814]

🙏🏾🙌🏾

[@sridharvavila8995]

Pretty clearly explained, could do much better provided you had used a table to put on the machine instead of a bed or a cushion sort of a background and good camera positioning.

[@billy-boyplays8180]

I appreciate the constructive criticism. I made this video the way that I did because I don’t really have a good area to film. My wife held the camera as I showed everything. I have a tight budget and tight space, so I did as good as I could with what I have. I appreciate your suggestions though.

[@traceyblair3910]

Thank you so much!

[@billy-boyplays8180]

@@traceyblair3910 you are very welcome! Thanks for watching.

[@ezeprojects5425]

Thank you!

[@billy-boyplays8180]

@@ezeprojects5425 you’re very welcome. Thank you!

[@MrGrind3]

Thanks