How to put registration numbers on your inflatable boat

In this video, I show how to put registration numbers on your inflatable boat in a cost-effective way and some others that are not too expensive.
**SHOP**
Link to Boatstogo "Using this link helps me to continue making videos": alnk.to/cwQtKmg
Boat registration decals: amzn.to/3cwtT6e
Boat registration plates: amzn.to/3ctpAsl
Jumbo sharpie pens: amzn.to/3qK0eMf
The site to order custom-made rubber plates: Boatnumberplate.com #youtubeislife #subscriber #youtubeguru #youtubecontent #newvideo #subscribers #youtubevideo #youtub #youtuber and #youtubevideos

[@greenkeeper448]

Eric, many thanks for taking the time. My catamaran is red so I will use the black sharpie. The numbers won't blow off in the wind. I find in any endeavor like this, being legal to the letter of the law on as many things as possible is key that way if there is an infraction that gets noticed, wardens will usually let one off with a warning, but if everything is messed up, not so much. Again appreciate your time on this.

[@ErickMartinSucre]

My pleasure! I've learned all this because I've been stopped multiple times by the rangers. They were nice to me thankfully.

[@waynebrucemanbat5787]

Thank you for this video! Have to register my inflatable kayak this year.

[@ErickMartinSucre]

It is my pleasure and thanks for watching!

[@tamirglick3577]

Thank you for the videos you upload about the boats, it helps a lot. Well done and keep it up.

[@ErickMartinSucre]

My pleasure and thank you!!

[@MySandToes]

Thanks for the VID! I don't even have to register my paddleboard in VA but i wanted to name her and put it somewhere on the board...this may work nicely!

[@ErickMartinSucre]

Nice! I've seen some paddle boards with small electric jets attached to them.

[@TheRealMimiD]

Hope you're getting out on the Water over the weekend, it's nice out, well here at least😃 It's beginning to look a lot like spring & I love it!Great video my friend. 💙Blessings

[@ErickMartinSucre]

Thank you very much! Today I am catching up with some video requests, this one and the one currently uploading on how to fix a leaky drain valve. Next weekend I am planning on visiting The Rainbow River Run in Dunnellon, FL.

[@10001694]

@@ErickMartinSucre you will be there with half the state population and snowbirds. Have fun with the crowds. I try tried to get in there to camp for next week but I was about a year too late because of spring break.

[@pandaoverboard]

Thanks man!

[@ErickMartinSucre]

Glad I can be of any help.

[@10001694]

I’m going to try the sharpie using the sticker as a stencil. Good idea. I’m trying to figure out how to attach the Florida decal. I’m tempted to put the numbers on the boat and the decal on the motor.

[@ErickMartinSucre]

I got stop by the Florida rangers and they said it needs to be on the left side of the boat. They are picky about it

[@michaellipson6736]

Hi Erick, Thanks for your very informative videos. One tip re lettering with stencils and sharpie: Don't use HH-66 Vinyl Cement as a waterproof coating over the sharpie ink, because the sharpie color will run. Instead, use Krylon Crystal Clear spray-- no muss, no fuss, works perfectly.

[@michaellipson6736]

I've used it on two of my NY boat registrations for my Saturns.

[@ErickMartinSucre]

Krypton Crystal Clear Spray. Good to know thank you. 😊

[@stevehumphries4928]

Well concerning Boat registration plates ... I don't understand why it has a 4 star rating when the first page reviews calls them junk. So I looked into making my own plate from PVC ... etc. Thin 4 x 4 was too flimsy, the thicker was expensive, and not sure if they would float. Anyway ... I decided to 60 inch of 4 inch wide PVC pipe and 4 Caps. Cut it half put the caps and the decal on ... and they float if I loose them in the water ... etc. Works out pretty good for Sea Eagle inflatable paddleboard at the bow for it can be tied down with storage bag.

[@ErickMartinSucre]

Sounds like you have it handled, well done 👏

[@stevehumphries4928]

Also ... if anybody wants to try this make one end cap for each screw on\off and you can store some gear in them ... etc.

[@glenstriper]

Great video!! Just a heads up, in California they won't allow the numbers on the plates anymore, they must be permanently attached. Learned that the hard (expensive ticket!!) way. Love your videos!!

[@ErickMartinSucre]

Ouch! California is tough!!

[@meryrimmer1381]

Noooooo and i just made the plates

[@ErickMartinSucre]

If they do the job, it's all good. Be safe out in the water

[@pandaoverboard]

How much for your ticket?

[@yoo_adrian8915]

I’m gonna Velcro the sign. Thanks for the video

[@ErickMartinSucre]

Velcro works as well. Be safe out there and have a great time 👍

[@travisrolando8205]

Happy Weekend Erick!!

[@ErickMartinSucre]

Happy weekend Travis!

[@travisrolando8205]

@@ErickMartinSucre Thank You Thank You!! 🤗💪👍🏻✊🏻👊🏻

[@harryj1081]

$4 stencil letters from homedepot, $4 spray paint from homedepot. Duct tape all and spray it several coats, dries fully in a week. Stays forever.

[@ErickMartinSucre]

That's another way or doing it

[@necrom21221]

Smart.

[@ErickMartinSucre]

Thank you 😊

[@BigTVideos]

One of the problems and using a sharpie is through time dealing with PVC and even hyper line the ink can bleed and spread within the material. Are used to Mark PVC vinyl with sharpie for part number identification and my company and in about 3 to 6 months it would bleed and not look as clean down the road.

[@ErickMartinSucre]

I had that issue with other colors, but black sharpie does not bleed

[@ia6980]

Watching other utuber- I used spray paint and it was a bad idea, it started to chip after few times of folding of my boat, sharpie is a great idea

[@ErickMartinSucre]

Thank you! So far it has held pretty well.

[@ia6980]

@@ErickMartinSucre thanks for sharing!

[@ErickMartinSucre]

Anytime 😊

[@DashFlicks]

where do i get the vinyl letters? many thanks!

[@ErickMartinSucre]

On Amazon, there is quite an extensive selection too. amzn.to/3IZVYny

[@timharris7425]

I have a big fish 120 and the material of the yak is porous I can't get letters to stick at all, what is your thought on using the sharpie for this or even paint

[@ErickMartinSucre]

Maybe the silver colored sharpie might work.

[@Excaliburt]

Thanks for the video. Where did you get those vinyl letters?

[@ErickMartinSucre]

In Amazon. They have several different colors and types

[@ErickMartinSucre]

amzn.to/3RmqkTY

[@isidromorales5789]

can you help me . how can i register my boat in california and what do i need to go to dmv

[@ErickMartinSucre]

I use my receipt and a bill of sale. Tye bill of sale usually comes from the seller.

[@bobshute4128]

What boat brand is that? Cool little boat!

[@ErickMartinSucre]

That is my Saturn SK385XL inflatable kaboat. My other one is a Saturn ZK380 inflatable kaboat.

[@Mypitbull82]

Do you ever use a anchor also do you know a good anchor for a flowing river

[@ErickMartinSucre]

I got a 5 pound anchor but have yet to use it. My boat has transom wheels so whenever I stop at an island, I bring the boat inland with me.

[@Mypitbull82]

@@ErickMartinSucre thanks Eric

[@ErickMartinSucre]

@@Mypitbull82 My pleasure, although I wasn't of any help lol

[@andybustamante9461]

Hello Erick. I am getting from this video that sticking the vinyl letters to the inflatable boat would not work?

[@ErickMartinSucre]

No, they tend to peel off.

[@obregonjr2568]

Hello Erick, do you know how many registration plates by law you have to put on the dinghy, if one on each side or only one on one side?

[@ErickMartinSucre]

One on the left side, on the right just the numbers

[@obregonjr2568]

Erick y el sticker amarillo que dice el año de vencimiento no se pone?

[@ErickMartinSucre]

@@obregonjr2568 Si, se pone en una plaque con los numeros en el lado izquierdo.

[@obregonjr2568]

Entonces se pone el sticker amarillo con los números en solo lado,que puede ser en el izquierdo o en el derecho

[@ErickMartinSucre]

En el izquiedo. En el derechi solo van los numeros

[@martineisenschmied435]

I believe the U.S. Coast Guard requires the numbers to be permanently attached as well. They don't accept numbers mounted on a separate plate.

[@ErickMartinSucre]

These were the instructions given to me by the coast guard in Tampa Bay for inflatables.

[@fishgod20]

@@ErickMartinSucre Where did you purchase those license plates

[@ErickMartinSucre]

@@fishgod20 I got them from Amazon amzn.to/3vemNOu

[@pilgrim26-02]

Hello! And if I bought a boat on the aliexpress website and all the documents came in Chinese, what should I do?

[@ErickMartinSucre]

If there is a way to translate it and copy it to a different piece of paper, you should be able to do it. If all fails, and if possible, return it and buy a Saturn: alnk.to/6bUtg64

[@pilgrim26-02]

@@ErickMartinSucre Thank you very much!

[@ErickMartinSucre]

Anytime 😊

[@JamesWilsonJ4life]

Hello my family 💯

[@ErickMartinSucre]

Hey hey! Happy weekend James!