how to put your rear brakes in service mode on a 2018 toyota camry

If you find this video helpful feel free to donate at www.paypal.com/paypalme/nickt...

[@bleach_drink_me]

Thanks. Used this on a 2020 today at work. Scan tool wouldn't set it in service mode so looked for other options. This worked.

[@Nickthecarguy]

Yes I noticed this with the Toyota techstream I didn't have that option so I had to use this step

[@bleach_drink_me]

@@Nickthecarguy thanks for confirming. It was early in the morning so I thought I possibly overlooked it.

[@kearney6197]

I’m so glad I came across this video because I’m servicing my brakes and I didn’t know about this feature you explained it very well and detailed thank you 🙏

[@BPLAZMA]

Brakes

[@christianrios5976]

Really informative, other videos I saw didn't show you how to turn it back on yet you did

[@arturogarcia8376]

On Toyota Camry 2018 rear brakes you safe my life thank for your video ok thanks 🙏

[@eddeewhat5553]

Excellent video 👍🏽

[@Angelo80907]

Thank you! Some how my scanner put it into service mode but couldn’t put it back out of service mode. Life saver 🙏🏼

[@ImBakerB]

Bruh happening to me rn hoping this works

[@samuelcontreras5041]

Great job, thank you!!

[@leftcoastdrifter]

Perfect video! Way faster than the WSM.

[@joeautorepairauto210]

Thanks man worked out great. The only thing I didn't catch was that it's okay to turn the car off after putting it in to service mode..

[@emangee9268]

It's definitely safe to turn the vehicle off when the vehicle is in "service mode". I have recently replaced rear brake pads on a Mazda 6 with an Electrical brake system and have had no issue with the brake system after the repair was done with the vehicle off in "service mode". Just be sure to take the vehicle out of service mode when done with the repair and all should be well!

[@zeyadrashid6774]

Thank you so much ❤

[@joegomez7256]

Thanks for the video

[@ajnr711]

Thanks for the video also

[@LordRocco777]

Thank you

[@Ltholst7]

OMG. Thank you so much sir. I almost p*shed myself.

[@alikhairuldeen8312]

Does this work on lexus es350 2019?

[@romojon6557]

This guy said its a push in piston... is this for the xle??

[@keland2002]

Will this procedure also work for putting the Camry in maintenance mode so you can keep the engine running to change coolant in the radiator and inverter, perhaps by pushing start while holding down on the brake at the end of your procedure, or is that procedure completely different? If it's different, by any chance could you tell me the procedure or where I could find the procedure? Thanks

[@Nickthecarguy]

The procedure is completely different it's quite a bit of steps you got to do to put the engine into maintenance mode I don't know it off the top of my head I will have to ask one of my coworkers

[@Scavs_Inc]

Thank you. The TIS instructions were not clear enough in my opinion.

[@rudyozuna883]

Same for 2020 xse camry?

[@tonywiggins8073]

Okay after you do the rear brakes do you manually pump the brakes to set them (traditional style) before you renegade the E-Brake? Or do you let the procedure set them?

[@jeffcuevas5728]

pump then e

[@jimhoward2538]

How do you know if the pistons are push in or twist? is the procedure different? I have an XSE with 3.5 . Thanks

[@luisfuentes1568]

Yes I have a xse an it does work

[@luisfuentes1568]

This is the guy that helped a lot. With this video I was able to fix it!!!!!!!! It took several hours but got it done an learned something new!!!! kzbin.info/www/bejne/i6DMpaGce9iDkLs

[@luisfuentes1568]

The first part of the video is not for the xse, but about the caliber an the understanding of it is what I got from this.

[@phooopanda2321]

I just have a Manual e brake, does this also apply to me with my 2019 camry se?

[@Nickthecarguy]

If it manual no

[@MedranoChems]

My piston will not push in please help me!

[@rayroh]

Help, my piston pushed all the way I didn't realize I had to do this before taking caliper off

[@silxer719]

Did you fix it man let me know what you did I need help asap please

[@rayroh]

@@silxer719 get a battery and jump the electronic parking brake. That's what I did. A battery and a wire connecting to each terminal. Then touched the wires w the terminals on the parking brake until it rewinded

[@richjunah1234]

​@@rayrohdo I need to disconnect th battery to car first?

[@rayroh]

@richjunah1234 no, you just a separate source of power, you can either use a power probe to send power with a jumper box or batter and send power to each of the terminals in the connection respectively to positive & negative

[@rayroh]

@@richjunah1234 you probably could disconnect the battery, but if I remember correctly, I did not disconnect the car battery

[@icecream5693]

The first part worked, but after I did the brakes it wouldn’t return back to its position

[@kottonkandie97]

Mine either! What did you do? Did you have to take it to the dealership?

[@HuuTonyTran]

Or you could remove the electric motor like me and use Allen Key twist outwards on the motor while have a cylinder presser on the other end to press it inwards and put everything back lol works for me 💯🤷‍♂️

[@ajnr711]

I was just about to

[@brandonwecker3121]

Do not put into service mode with if the caliber is removed from rotor!

[@onilortiz8603]

How about if piston is out already we didn't know we needed to do that

[@silxer719]

Hey man did you fix it ? Could you let me know how asap please!!

[@onilortiz8603]

Bout new one they say it won't go back in

[@ItsMikey95]

@@onilortiz8603 did the same thing... 180 down the drain

[@etsnet]

@@ItsMikey95 you had to buy a new caliper or actuator for ebrake? Did you replace both sides or one? Both mine are stuck out.

[@ItsMikey95]

@@etsnet I bought a new Rear brake caliper, kept the e brake just swapped it to new caliper

[@batteriesincluded7188]

Thank you Toyota for making something simple a giant mess. Dozens of people buying new rear calipers because of this horrible system. Bravo. You too shall fall off the throne.

[@wicked1rish]

Plz help... I retracted my piston after it was off of the rotor and now I can't get it to compress again before putting it on.

[@scatx]

I can’t put mine back to normal 2022 camry

[@wicked1rish]

My piston is stuck after retracting it off of the brakes just to see it work. Plz help. I have no idea what i did wrong or why I can't get it to compress again.

[@Atrain-td4yg]

Did you figure it out? I ran into the same problem

[@jefftaylor3985]

Just tried to change my rear brakes and this also happened to me. My driver side rear brake piston is all the out and won't go back in. Anyone have any ideas?

[@haroldnavarro9055]

​@@jefftaylor3985try disconnecting the battery. Wait for a few minute then try again