How To Put Your Rear Brakes On Service Mode for Toyota Vehicles

#BulletSolano #BalazoSolano #2019RAV4 #RearBrakes #ElectricBrakeSystem #Toyota #ParkingBrakes #maintenance #2019nup
#grinding #servicemode #electronicbrakes #brakes
My Website www.bulletsolano.com/car-prob...
Hi Guys and welcome to another episode
if you have any questions please let as know
Thanks for watching and don't forget to Subscribe.
amzn.to/366IMXF Side Markers
coiloverdepot.com/products/98...
amzn.to/30e2Zd5 KIPA Adjustable magnetic camber wheel alignment Tool
Truhart Rear Camber Kit amzn.to/35wBjB2
Ball Joint Separator tool amzn.to/2FzU2kM
amzn.to/2ZGl4A2 2019 RAV4 Interior LED Kit
amzn.to/2QEC99o Dome Light LED for 2019 RAV4
amzn.to/2QANWpj Map Light LED, Visors and Cargo Area
amzn.to/2LWnlkW H11 Aukee H11 LED Bulbs
amzn.to/2Of4Qtx 9006 LOW Beam K2 LED Lights
amzn.to/2ODkoGB 9005 HIGH Beam K2 LED Lights
amzn.to/340nFGu Interior LED Lights Honda CRV
amzn.to/2M6ozdY New LED's for the 2019 RAV4
amzn.to/2neWg3h Hood Lift Support RAV4 2019, 2020 All Models
amzn.to/30aVjvi Interior Lights
amzn.to/2Nq0WPd Dome Light
amzn.to/31yLZhj Reverse Lights
amzn.to/2LBAsIr Syneticusa Front Turn Signals
amzn.to/2MHE11L Griot's Garage Glass Sealant
amzn.to/2HjDrnt TACKLIFE T6
amzn.to/2Hrgk9W HINOY E-POWER43 Battery Jumper
amzn.to/2W6orOv Sony RX 100
amzn.to/2WlTx50 Impact Gun
amzn.to/2FRTAQj GoPro Hero 5
amzn.to/2MyAEY5 Retrofit Projectors
amzn.to/2DnL49Q LED Strip Turn Signal
amzn.to/2Dma4OO H1 HID Kit
2000 ACCORD CABIN AIR FILTER REPLACEMENT
• 2000 ACCORD CABIN AIR ...
HOW TO BLEED BRAKES with a Manual Pump
• HOW TO BLEED BRAKES wi...
TOPDON Tester
amzn.to/2S38N4q
/ bulletsolano23
------------------------------------FOLLOW ME---------------------------
Follow me on Instagram
@bulletsolano36
Follow me on Twitter
@bulletsolano
Like my Facebook page
/ luis.b.solano.3
Thanks for watching.

[@paulserrao4015]

Thank you for being so detailed. I had to service the rear brakes on my 2019 RAV4 and looked at several videos about how to put the brakes in service mode. Seems everyone had a different method and perhaps missed some of the simple steps. Leaving the door open being one of them. Everything worked as you said it would (I forgot to reattach one of the connectors and tried to reset the system and that didn’t go well😅! Anyway,once I realized the error and corrected it, the brakes reset according to your instructions. As it happened, I paid for a dealer service a couple years ago and only had about 25Km on the odometer from that time. I suspected the brake pads were stuck which is why I wanted to check it out. I was correct - both sides were seized and I used a rubber mallet to hit them out. One of the slider pins was also dry and stuck. I replaced the brake pads, serviced the calipers, etc. working great now!

[@2012pwagon]

Only video that tells you to cycle key! Worked perfectly thank you!!!

[@maestro7028]

Thank u its work with me ur steps is clear and simple

[@MacTV303]

I will remember this video for when I need it. Thank you

[@meng6315]

Thank you for the steps. Very appreciated.

[@feeshermann726]

Fantastic job! Very clear and concise. Many thanks!

[@igotyourmomful]

Only guy who knew what to do!

[@jamespindera3401]

Very helpful video. Quick and to the point. Many thanks.

[@YacoubImigine]

Thank you for the steps. It's very helpfully! We appreciated.

[@GCata-ys3hw]

Great video! Thanks for making it!

[@nazarettos6987]

Love you man, your videos are very helpful

[@PickyOne]

1:45 that the step everybody misses and get confused, get your foot off the brake paddle while holding the button.

[@feliciano27]

Excellent job my friend, you were very clear on your steps. I will follow you and keep up your good job. God bless you all the time😊.

[@BulletSolano]

Thank you

[@KenG....]

Good info for later. Thank you sir.

[@alexc3504]

Thank you man!

[@greg42864]

Thank you! Just replaced my brakes. Yes, the procedure was finicky. Took 3 times to get it in service mode.

[@janusz8690]

thank You - very good job !!! warking :)

[@brianb5779]

Hey brother I just got done w this. Was trying to update scanner and charge it and figured id check youtube. Zero experience w these brakes and brother you made this so much easier. After seeing this i left scanner on table and knocked it out. Thanks a million brother and best of wishes to you.

[@BulletSolano]

Nice, no problem

[@kimbelcaines4684]

Great job bro work just like you said.

[@dtdlookout]

Excellent Video ❤

[@dannyDCC]

Gonna do mine this week

[@dinhnguyen8254]

Thanks for sharing

[@jurkodurko]

please working on AVENSIS 2018 ? thank you

[@momamm1]

thank you

[@Sammyt07]

Thank you so much no I have confidence to do the rear brakes. I already did the front ones but was not sure about the rear brakes. Do I still need to pump the brake pedal after changing the pads? Like the front ones?

[@BulletSolano]

Yes

[@Sammyt07]

Got it. Thank you again. Your video was by far the most helpful I found.

[@danielcampos2470]

Gracias 🙏

[@kaliman6719]

Question, can you leave the car on service mode and drive it safely. I have been getting the maintenance EPB light on and get the message to take car to dealer. On the 2020 CHR forum, this has been a common problem......The warning light has cleared several times. Took car to At the dealer, although no codes came up, a code to replace the speed sensor on the rear right hub was recommended. Is this repair needed asap, or can I turn off the auto emergency brake to the off position to minimize tripping the maintenance light?? . Thanks in advance.

[@icarius7793]

video is better than The Car Nut bc your video visually shows each step to disengage (svc mode) & re-engage the electronic parking brakes.👍

[@1davidro]

is it the same procedure for the 2021 Lexus NX300 ?

[@BulletSolano]

Yes

[@dreid4760]

Thank you! I have a question about disengaging the brake per you 5:00 and 5:11. 5:00 you state to disengage the brakes you pull the lever. In 5:11 you state press brake pedal and hold the lever down for 5 seconds to disengage. Please explain.

[@BulletSolano]

I don’t know how to explain something that I already explain! Just follow the video to get the process done

[@dreid4760]

This is no answer to a good question! I seriously do not understand and I even stated the time line that creates the question. Why don't you reconsider and answer one of your reader's question?? I will thank you again.@@BulletSolano

[@Pure_Flow]

In those parts, he's talking about if you want the parking brake to be automatically set or not whenever you put it into drive or park. You can have the parking brake automatically turn on whenever car goes into park, and auto turn off whenever u put into drive or reverse by pushing the brake pedal and pulling up on the e brake button and holding up for few seconds and u can turn that same automatic feature off by pushing brake pedal and pushing the e brake button down for few seconds

[@dreid4760]

Thank you for your consideration and thoughtful explanation. Bullet could use a lesson in life when someone ask a question that a person really does not understand. Hopefully, he can learn from people like yourself. @@Pure_Flow

[@BulletSolano]

@dreid4760 😂😂

[@everythingflytv507]

Hey so before the service mode, when I put the car in drive it would disengage the rear brakes automatically and when I would put it in park it would engage the rears brakes. Now it doesn’t do it.. any tips?

[@BulletSolano]

Hey, yes! Just turn the car in the on position pull on the electronic brake lever for few seconds to make it automatic again

[@kennethhatcher5822]

Will this method work when changing the brakes on front of a hybrid rav4 , to stop the piston pushing out electrically

[@BulletSolano]

Front brakes are not electronic

[@kennethhatcher5822]

Is there not an electric pump that keeps pressure on calliper every so often ? I hear a motor run when I open drivers door ?

[@BulletSolano]

It’s the artificial pedestrian noise or hybrid motor, but front brakes are regular brakes

[@kennethhatcher5822]

No it’s like the abs pump is pressuring up the brakes system ?

[@Luis-ok7ce]

Can you just shut it off in neutral then switch it to park while it's off, or you can't do that.

[@BulletSolano]

Probably but just follow the process on this video

[@owens417]

I had the caliper of when i did this. It pushed the piston all the way out. I was able to get it back in, but now the dash says parking brake unavailable. Parking brake malfunction, is there any way to clear the malfunction?

[@BulletSolano]

With a scanner

[@owens417]

@@BulletSolano thanks, yea I ended getting a cheap scanner. It worked, then I was able to put it back in service mode. Another question when you bleed the brakes is it all 4 or just the front?

[@BulletSolano]

@owens417 all 4

[@owens417]

@@BulletSolano thanks

[@owens417]

@@BulletSolano another question the boot on the caliper has a small hole. Is that just a dust cover or does that hold brake fluid? will is leak?

[@jochiejay7277]

i should’ve watched this video before. I did the brakes without putting it in service mode and now it says parking brake unavailable, what can i do to fix this?

[@BulletSolano]

Put it in service mode then take it out of it

[@ernestoresendiz5673]

Got it fix?

[@ernestoresendiz5673]

Got it fix?

[@DRZrider07]

My wifes 21 XLE doesn't want to go into maintenance mode! It's pissing me off!

[@BulletSolano]

If it doesn’t work get a scanner

[@DRZrider07]

@@BulletSolano after this I watched a short from Technicians of the North and their method worked...Sort of... The button was blinking and I heard the motor do the long winding sound but the brake pistons weren't in all the way when I disassembled it. I went ahead with the job anyway and when it was time to put the caliper on, I confirmed it wasn't retracted enough so I took the motor off and used the biggest Torx driver I have to manually wind it back and used my brake spreader tool to push the piston in all the way. Afterwards everything went smoothly.

[@BulletSolano]

The piston doesn’t go in, after doing the emergency brake procedure you have to push the piston in manually like a normal brake job, but I’m glad that you get the job done

[@Kickstand_kyle]

Accidentally took one side off and the piston extended out too far and ripped the boot.

[@BulletSolano]

Get a new one from a dealership, to put it on grab some silicone paste to slide it easier into the piston

[@Kickstand_kyle]

@@BulletSolano I’ve got it figured out now. Gotta take it to the dealer to get the parking brake malfunction off. It was unplugged while put into service mode when trying to save the caliper.

[@TANNAMN]

​@Kickstand_kyle I ran into same issue as you. How to did you get the caliper to go back in when it extended out too far?

[@Kickstand_kyle]

@@TANNAMN I ended up getting a new caliper and had it reprogrammed since the seals ripped you can buy seals separately but it’s a bit of a pain. You have to leave the calipers on when put in service mode.

[@TANNAMN]

@@Kickstand_kyle my seal didn't rip. Can I manually actuate it with the 12v battery method?

[@rosawolf2463]

So.. I skipped this step before changing my rear brakes and now I have a parking brake malfunction. Can I try to put it in service mode now or will that not do me any good?

[@BulletSolano]

Get a scanner and reset the code

[@elvisramon4749]

Mine is stuck in service mode

[@BulletSolano]

Do the process again

[@jacoboflores9257]

Just activate the EPB. It should exit service mode.