my cut went wonky when turning about .1- 0.3mm out of allinement how do I make it true again?
@estopado6910 жыл бұрын
hi there, could I use this tool to trim off raychem PVC sleeves 5mm thickness cover of copper bars??
@TennisWorldSetPoint Жыл бұрын
I have these really small as baffles I want to cut I saw how u cut tubes but I don't think it's possible because I can't grab onto it. So how could I cut a tiny 1.25 wide .5mm thick but the area to cut is only about 2/3 inch. Say I wanted to cut it in half how could I go about doing that
@mikemaid53503 жыл бұрын
How come you never mention galvanized steel?
@mikewillard40732 жыл бұрын
Would this cut through the steel on a steel wire armoured cable?
@rosaylafuente11 жыл бұрын
hello guys from toolstop , only two questions. how many time for cutter and how ,many laps around the tube are necessary to cut completely?. I iamgine that the trickness of the tube are 1,5 m.m at most, rigth?
@Wowwow-wl3kx Жыл бұрын
is this can cut gas pupe ad well?
@porkchopm812 жыл бұрын
Are these cutters able to cut copper pipe, or are they purely just for stainless?
@Senator-Wary2 жыл бұрын
It wouldn't matter copper is softer so it'll cut right through
@SylasG3 жыл бұрын
Tube cutters work harden the stainless tube when you cut it with a regular tube cutter. Work hardening is bad if you intend to flare the tube after. How do you cut it without work hardening?
@ppeerapat77928 жыл бұрын
Can I use this tool with aluminum pipe ?
@TennisWorldSetPoint Жыл бұрын
I'll answer if it can cut as it can cut allumnium
@romelwelder41463 жыл бұрын
How can i get those tools?
@shalokin3 жыл бұрын
Hi I am looking to cut 316 grade 48.3mm x 2.6mm tube into rings 12mm depth, need to be within 0.5mm accuracy, could you recommend this method or possibly another? with thanks
@TennisWorldSetPoint Жыл бұрын
Did he ever get back to u I'm trying to cut something very small too and I don't see how I can grip it.
@TennisWorldSetPoint Жыл бұрын
Exactly want to do rings but unfortunately I'm starting with something very small.
@SpectraPrime2 жыл бұрын
looks like these are not available any more
@toolstop2 жыл бұрын
Unfortunately we no longer stock these specific cutters but feel free to browse our range of cutters that are currently available: www.toolstop.co.uk/hand-tools/plumbing-tools/pipe-cutters/
@spaken27684 жыл бұрын
Can this be used to cut a 19mm rod?
@toolstop4 жыл бұрын
I would doubt it very much Spaken.
@RandyMandy88888 жыл бұрын
How much is this tool to buy.
@RandyMandy88888 жыл бұрын
+MrToolstop Ok will do..Thank You.
@CableWrestler10 жыл бұрын
Omg its Alistair McGowan
@mindfreak00100911 жыл бұрын
they are the real animal! lol
@sedoniadragotta83235 жыл бұрын
Can I use a 3-28MM MANUAL MULTI-MATERIAL PIPE CUTTER To cut my galvanised conduit tube ?