How To Reball PS4 APU BGA - (CPU GPU Reballing) Blue Light Of Death BLOD Repair

[@theelectronicshop4894]

As you can see it takes quite a long time and there are many pitfalls in Reballing on this type of Stencil and Jig setup the alignment height has to be precise and it very seldom comes out without having to do exactly what he is having to do. So the Recommendation is to buy direct heat stencils that are EXACT for this GPU use Dry Flux and you will not have any issues i have investigated almost every Reballing system on the market and come to the Conclusion that Direct Heat is the Best Solution i do have a WDS-620 that has Dual Vision Alignment but if you use the Drop-Flow and Touch technique to allow the Chip to Self Align it will be Fine. Low Melt Solder along With Flux Dipped Solder Braid is the best technique to Prep BGA Chip and PCB Surface.

[@JC-km5xw]

for ps4 apu there is no factory stencil

[@bierbrauer11]

You do impressive work, love your channel. It always amazes me how gnarly the tips of even one’s best tweezers look under the microscope

[@GoGamers]

Thank you 😊

[@blarghblargh]

glad to have found your channel. in it for the curiosity, but also kinda in it for the workday background sounds.

[@user-hj2zt9ri6t]

I have a ps4 slim with 1 sec blod. Directly below the APU there are some caps (maybe 30 40 ish) in one group they are arranged horizontally and other vertically. I'm getting 1 ohm resistance to ground on one set and 25ohms on the other. Anyway you can check and tell i dont have any proper repair shop in my country.

[@theelectronicshop4894]

Solder pads become oxidized and that is why they looked like they were missing that is why it very important to Tin Both the PCB pads and the BGA pads when performing this procedure.

[@Nick456-o9b]

Hello. What temperature do you set your bottom preheater to? Thank you.

[@behindblu3yez]

What bga machine do you use ?

[@am5924]

Friend, can you tell me what the values ​​of the ramps are in the ir6500 to remove the processors from Playstation consoles?

[@kurtstone1272]

@Go Gamers Did you remove the glass panel from the IR6500?

[@Toqhy]

I use wds 580 really good machine but wait 1 question do you have the ir6500 profile for ps4 reflow? This machine I got for my friend and shipped him it and want the profile for reflowing the chip the reballing do you have reflow process R1 L1 D1

[@Heinrich.Fourie]

hi can you make video for ir6500 profiles short one please or just document with link

[@aehy88]

Hi sir wich profile for ir6500 use? Solder and desolder

[@ceejay_gaming9636]

I do have the same machine and I am using the same settings as yours but for some reason whenever I attempt to lift up the APU that top metal shield comes off

[@ceejay_gaming9636]

I heard you say step one it’s 60c at 16minutes did I hear that correctly? Or did you mean to say 60c at 16 seconds?

[@TheLinuxAdmin88]

What is the size of apu ps4 size for rebaling

[@hassanahmed-rb3yc]

Nice vid. Can you give me the setting profile for ps4 and ps3?

[@netten2053]

can u share the profile do u use on the Achi

[@Jason-zh7wo]

Nice video thanks for the info 👍👍

[@phynx-victumterra652]

With the amount of kapton tape used, do you ever run into components being lifted by the tape during the heating process?

[@GoGamers]

Good question. I actually haven’t. I have had components lift from the board that wasnt all the way under the tape, but that kapton tape is by far the best!

[@i_izi_gambit7395]

Thank you so much for this... in items used, u didn't include that thing on which u place the processor and then start placing the balls.

[@JeffreyRiba-d4o]

Impressive

[@ryjacrafts4797]

how much did wds-620 cost you?

[@cemsengul16]

I can't believe this is even a thing. I gamed so much on my PS4 and then traded it in for a PS4 Pro on launch day and still game so many hours. I think a very small percentage of PS4 APUs die on people.

[@momo-of6fg]

bonjour peux tu poster ton profil de IR 6500 car j''ai du louper une etape Merci d avance

[@BSGrepair]

Hello sir link to the 0.55

[@GoGamers]

www.ebay.com/itm/115108115649?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=N12lE6TBSzy&sssrc=2349624&ssuid=gQG3L2W3TDS&var=&widget_ver=artemis&media=COPY

[@nasarmp]

Ps4 bga profile??

[@christiangames7106]

hello brother really please 🙏🙏🙏 I need your help