How to rebuild a 13 speed eaton fuller transmission (part 1)

[@dylanmelvin16]

We just rebuilt a 13 speed in our shop and your video guided us the whole way so thank you very much!

[@That1LogisticDude]

Can you rebuild mines ? Where are you at ?

[@nevinkuser9892]

​@@That1LogisticDudeWhere are you?

[@That1LogisticDude]

I’m in Atlanta GA area.

[@johnsavoy980]

Built my share of 13 speeds, I had 3 truck all with 12513's. I always painted the inside housing with red primer, it helped keep the insides clean with no build up

[@miltonramirez2088]

I enjoy so much i have long time .no rebuil this type trans.i forget timing correct.and i was strugule to put togheter.now im refesh .i goin to do the right job..the problem im diing engines.normaly i no do transmisions .u video help me to remember the tricks

[@ivanmadrigal1395]

Man videos like you post are super necessary bro tank you GOD bless you

[@maximumpowertrain1433]

Thank you so much for watching brother, i will upload the auxiliary box back section part 2 soon 👍🏼

[@jhune1367]

Ride on Dude... keep the video comin'... Greetings from California.

[@maximumpowertrain1433]

Thank you! Keep on truckin’ 👍🏼

[@jorgitoturbo110]

Very helpful video good job thanks a lot!

[@endtimeawakening5557]

Great video! You do great work and I'd recommend you to everyone. Stay safe and keep enjoying LIFE! God bless! ❤

[@FilipinoToyCollectorsWorlwide]

Nice and helpful content as always!

[@maximumpowertrain1433]

Thank you bro 👍🏼

[@kristianhermann5971]

Nice rebuild - thanks for sharing

[@maximumpowertrain1433]

No problem 👍

[@robertoribeiropessanha1387]

Meu parabéns pelo seu trabalho 👍

[@robertoribeiropessanha1387]

Desmontagem do câmbio do Ford cargo 4532 👍

[@mschmitty24]

Awesome video ! I rebuild light truck automatics , just rebuilt the 444 in my kw900. I have an issue starting with the trans- Been pulling doubles and 7th is whining while driving unloaded. Do you sell overhaul kits ? I’ve been thinking about upgrading from the 1400 ftlbs to the heavier rated 13 speed.

[@robertoribeiropessanha3547]

Eu adoro o seu canal meu parabéns 👍

[@maximumpowertrain1433]

Obrigado pelo elogio 👍🏼

[@kristianhermann5971]

Do the taper bearings on the shaft ends need a preload set? Or are they one piece (pre-set)?

[@albertmudzingwa1930]

Absolutely lectured, thanks a lot,but needs a lot from you

[@steven361984]

Cool video you should do a step by step brake down comprehensive series you would get along of views. Please do one 🙏 🙂

[@maximumpowertrain1433]

Thank you i will do one for you soon brother 👍🏼

[@teddyedwards4772]

I love this

[@Skyrimninjamod]

bro you awesome man

[@maximumpowertrain1433]

Thank you bro 🙏🏼

[@Skyrimninjamod]

@@maximumpowertrain1433 god bless you

[@soccergod123]

Hey very good video i just could hear on min.6:16 did you pick any opposite points of that gear ?

[@renecervantes595]

Gracias.

[@martystuart1041]

I'm having trouble with our Interstellar Industries Corporation Hyper-Galactic Mark 4 trans-interface drive (with time generator). We're dead in the water behind Venus and any advise would be great. And good job on the 13 speed.

[@robertoribeiropessanha3547]

Muito bom gostei 👏

[@robertoribeiropessanha1387]

Caixa do câmbio do 4532 montando 👍

[@raulpereyra2817]

That's AWESOME! APPRECIATE the video. As I've ALWAYS wanted to see how it's done. But one of the many questions that I want to ask. Is WHAT kind of oil SHOULD be used? As I use 50 weight oil. I've heard gear oil. But what is BEST?

[@maximumpowertrain1433]

Thank you so much! Keep on truckin’ 👍🏼

[@mcrosten829]

As long as it’s an Eaton fuller manual just stick with AW-50 synthetic. If it’s an Allison it would probably be transynd 668 I think or autran 295. Depending on the model transmission I believe

[@MECHANICUSTV_88]

Yown salamat sa shoutout idol❤️ I really appreciate it! tuloy mo Lang yan susubaybayan ko pag lago mo👍

[@maximumpowertrain1433]

Maraming salamat sa supporta tol, will do the same 👍🏼

[@MECHANICUSTV_88]

@@maximumpowertrain1433 salamat din bro☝️👍

[@robertoribeiropessanha3547]

Vc e demais 👌

[@CPRoyalty870]

Do they have a break-in period after rebuild ? just got mine done hearing a rattle after like 200 miles

[@robertoribeiropessanha1387]

A de montagem da caixa do câmbio do Ford 4532 👍

[@truckerron]

How long does it take to rebuild a 13 speed transmission to do it right? I had a shop remove my transmission send it out for rebuild it was done overnight and reinstall the next day. Now I drive the truck and it doesn't feel much different than it did before. It washard to get into 5th and 7th gears before. Now it's a little bit better but still feels like it's hanging on those gears and sometimes have to push it in harder to get it into gear. I highly doubt they did a full rebuild but they charged me the$4300 price!!

[@Chill0465]

Hey can you do a video on installing a Pto on a 10 speed Eaton fuller transmission.

[@alwaysinmotion1]

Hi, just curious as to why my 18 speed won't go into gear easily, or come out easily. Seller said he put in a new clutch. The first half of gears are kind of ok but second half very difficult to engage or disengage. The shifter seems like it's not in gear or partly in gear. Doesn't pop out of gear, just hard to engage. Thanks

[@maximumpowertrain1433]

A few possible reasons, could be the shifter tower or sliding clutches. Or put full synthetic 50wt transmission oil, if your still getting the same problem then you would have to take it to your mechanic and get it diagnosed. Thank you for watching.

[@kristianhermann5971]

Interesting this trans doesn't run needle bearings between the shafts and gears (like cars) - is that common with semi's? Do the gears just float until engaged?

[@SuperDragon890]

Yes

[@echannelofedwind.6105]

Tnx bro 🤛

[@maximumpowertrain1433]

No problemo brother 🤜🏼

[@danilocostareis6769]

Muito bom

[@mamaafrika3689]

Where can I get a video on how it's been mounted on the truck

[@robertoribeiropessanha1387]

Muito bom 👍

[@maximumpowertrain1433]

Muito obrigado 🙏🏼

[@miltonramirez2088]

Im not transmidion guy but i like so much.doing

[@DavidReyes-fd3qz]

I see years of experience

[@maximumpowertrain1433]

🙏🏼

[@JamesPretty]

Music too loud can’t here you over it

[@nevinkuser9892]

I could hear him. You probably need a new phone.

[@JamesPretty]

@@nevinkuser9892 ya probably not

[@Sinister_Reaper]

​@@JamesPrettyya probably do

[@Ohio3AM874]

Good kabayan!

[@maximumpowertrain1433]

Salamat po

[@robertoribeiropessanha1387]

Gostei 👍

[@maximumpowertrain1433]

Thank you

[@nikoz4841]

Have you ever repaired endurant 12 yet?

[@fantai10]

could you tell me how much to rebuild the transmission for a semi, can i buy a old semi and rebuild it, does it cheaper than buy new semi ,

[@humbertoespinoza8177]

That’s awesome video bro really cool, How can I get a Quote for a complete rebuild in a FA0-16810C and how long does it take to get it done

[@maximumpowertrain1433]

Hi there thank you for watching bro! FRO16210C rebuilt cost roughly around $2300-$2500 depends how damage it is, the more damage the price goes up truck parts are getting more expensive now ⚙️😖 It takes about a day to teardown and rebuild a transmission.

[@humbertoespinoza8177]

@@maximumpowertrain1433 ok 👍 What city are you guys located and do I need to set a time to bring it to you and work on?

[@maximumpowertrain1433]

We’re located in Brampton, Ontario. Yes you would have to set an appointment.

[@Alex_775.]

I’m an ase master tech for heavy duty trucks and I want to switch to a specific skill. How do I transition to drivetrain?

[@timmensch3601]

If you were a mastertech you would know lol

[@pottnah6152]

@@timmensch3601 lmao

[@DD-lh4iy]

How much do you charge to do a same eaton fuller 13 speed transmission? I’m interested in doing mine from you. I’m from Mississauga.

[@maximumpowertrain1433]

Hello please message and follow maximum powertrain facebook page or you can give me a call 647-403-0612 thank you!

[@robertoribeiropessanha3547]

Eu quero o seu canal meu parabéns 🙌👍🙌

[@robertoribeiropessanha1387]

Eu também sou mecânico 👍

[@sanjayrasam4035]

Sir why they given 0 mark on counter shaft and why this white mark is required, and if we don't put white mark what will happened

[@maximumpowertrain1433]

“0”is where you put the timing marks on both countershafts. What would happen if we didn’t properly time the counterhafts? If the twin countershafts are out of time (one or more teeth out of position), one or more of these floater gears will operate slightly out of position with the output shaft. The misalignment will usually allow all the gears to be selected, but that transmission is now doomed for failure.

[@loofookilla2816]

Good video bro but turn down the music when you’re talking

[@maximumpowertrain1433]

Thank you bro, i will 👍🏼

[@diegocholango2482]

0

[@diegocholango2482]

0

[@mariovillamarin1673]

Necesito el armado de la caja eaton fuller

[@maximumpowertrain1433]

Please watch the part 2. Thank you all for watching 🙏🏼 kzbin.info/www/bejne/pILcZ3unhNBknbM

[@jedereactions648]

Wtf are the liquid bases substances??

[@wooddawg4868]

This is all good by I don’t know why automatic transmissions took so long to be widely used in tractors/ commercial haulers. Tour buses use the same big horse power diesel engines and they have been in use for decades. Even CDL schools are now teaching new drivers on automatics. The manual has its place until their phased out.

[@khushwindersinghuniversali8317]

Have you Driven a manual tractor or do heavy hauler?

[@truckerron]

You have way more control with a manual transmission than you do with automatic I've driven them both and I prefer the manual transmission by far over the automatic! The only reason why the automatic became popular is because they wanted to get more meat in the seats. Most people don't have the coordination or the intelligence to drive a truck and shift at the same time.

[@eddiebartholomew9172]

Why do you build it laying down ?

[@Goldenratio-wc6qu]

Where are located? I am asking because my truck is in the shop due to transmission loud sound, I was asked $3000 to rebuild it?

[@maximumpowertrain1433]

Brampton, Ontario Canada

[@Goldenratio-wc6qu]

@@maximumpowertrain1433 can I get your email address? I will need transmission rebuild soon hopefully in that area of Brampton?

[@mustang4928]

Hi. My truck is a 10 speed manual (Eaton) the gears stock was on high range (I was told that this was a minor issue) But The mechanic told me it's a big damage, they need to rebuild it for $ 3500 without labor!!!. I agreed. Then I found out, that he replaced it with another one, that one doesn't have a cooler (my transmission had one) tell me please if what the mechanic did is right/okay?. Should I accept this transmission ( the new one without the cooler)? He's working on the truck now, haven't finished yet.. I still have time... should I accept what he did or not?? Please reply 🙏

[@maximumpowertrain1433]

As long as it has same ratio and model i think it’s fine, only difference is you won’t have a cooler in the transmission, but if you have one with no cooler and they gave you one with a cooler i think it won’t fit. but what we usually do is what ever the customer gives us that’s what we give back or give in exchange with the same unit to avoid any mismatch.

[@mustang4928]

@@maximumpowertrain1433 Thank you so much 💓 💗

[@mustang4928]

@@maximumpowertrain1433 Thanks again I appreciate your help. I asked why did he install the one without the cooler, he replied" you don't need a cooler for the transmission, and your pipes for the anti freeze are rusty and i don't wanna mess eith it... " is it true that the transmission could run without a cooler or was he making excuses? Also couldn't he have just changed the pipes? Thank you very much.

[@maximumpowertrain1433]

@@mustang4928 yes it’s ok without the cooler

[@Aiden.a25]

What kind of press are u using? can you share the link to it.

[@maximumpowertrain1433]

Hello thanks for watching. Im using a Sunex HD 40 ton electric hydraulic press.

[@Aiden.a25]

@@maximumpowertrain1433 Thanks man, I’m looking to start my own shop for Eaton transmissions and I have been researching on a reasonable press.

[@sophiasocal68]

How much does it cost to have an Eaton Fuller 13 speed rebuilt?

[@maximumpowertrain1433]

Depends on the damage of your core, but for a rebuilt or an exchange would be from $2000 to $3000 maximum

[@sophiasocal68]

@@maximumpowertrain1433 Thsnks for your reply. Recently spent 4400.00 having the back section re-done, new output shaft and new yoke. Looks like I could have had the entire transmission done for that plus shipping back N forth !!

[@maximumpowertrain1433]

@@sophiasocal68 wow sorry to hear that, they charged you way too much for just a back section repair. For the price you paid you could’ve got an 18 eaton fuller fully rebuilt. Well actually an 18 speed rebuilt only cost around $3500 to $3800 CAD max.

[@sophiasocal68]

@@maximumpowertrain1433 They also replaced the U joints, yoke, output shaft, and a worn back suspension bushing, wasn't just the back section!!

[@lasithrajamanthri5992]

Visaya po

[@sarhanggardy4043]

how can i connect you please i have d13 automatic transmission need rebuild

[@morganwright8966]

How long does it take to reman that 13 speed from start to finish?

[@maximumpowertrain1433]

A full day and a half from teardown, cleaning and assembling.

[@morgaann15]

@@maximumpowertrain1433 how many hours would you say is a day and a half?

[@eddiebartholomew9172]

It only takes about 4 hours to tear down and assemble…

[@maximumpowertrain1433]

@@eddiebartholomew9172 if everything is torn apart, washed and buffed, old gaskets were scraped off, all rust from the housing case is cleaned off and if all the parts are ready i would say 4hrs. But since i work by myself and do everything from teardown to cleaning and make it look brand new ordering parts and pick up, I don’t think i can do all that in just 4hrs i would say 9hrs max.

[@maximumpowertrain1433]

@@eddiebartholomew9172 i just like to tell my customers it takes a full day and a half just to get me some more time, cuz sometimes things don’t go the way you want it to be there could be problems along the way like suppliers giving you the wrong parts, missing parts, defects etc. But everytime i get a transmission or differential in the shop most of the time i get it done next day. Thank you for your comment keep safe brother.

[@manassesmiguel7618]

Tá ficando difícil peças no Brazil

[@mechanicboimtb5775]

pre saan ka banda nad rerebuild? ganyan din ginagawa ko caso wala akong channel...

[@maximumpowertrain1433]

Dito sa Toronto Canada pre.

[@mechanicboimtb5775]

@@maximumpowertrain1433 that’s good Dito naman ako sa Northern Alberta.. keep up the good work pre.. very nice video…

[@maximumpowertrain1433]

@@mechanicboimtb5775 thanks pre

[@dylangrant7947]

Why put the last spacer or the star spacer with the key

[@maximumpowertrain1433]

Hi thanks for watching & leaving a comment. I just like to put the last spacer on just so I won’t forget it.

[@eliasmathew1509]

Iam Mercedes Benz and all trucks mechanic

[@timofeypinchuk5959]

Hey can u fix my transmission?

[@maximumpowertrain1433]

Yes sir bring it in or call [phone] for more infos thanks!

[@jimmyhilliard35]

whatsup withthe sound

[@maximumpowertrain1433]

Sorry i got copyrighted that’s why i took the sound off

[@gekkehansie]

stop that f**cking music !@!!!!!!

[@maximumpowertrain1433]

😂 sorry

[@gekkehansie]

@@maximumpowertrain1433 ☺☺

[@robertoribeiropessanha1387]

Vc e demais 👍

[@maximumpowertrain1433]

Thank you sir