How to rebuild a Seadoo Accelerator Pump | Mikuni

[@ChrisChris-mg8rj]

Nice work!! I always wondered what those little brass pieces were for in the lines after you rebuild my carbs!

[@teddygill]

I need umbrella check valve

[@adamGriggs-o4u]

How do I get one of those umbrellas

[@adamd5096]

Is it possible to get a link or from were I can buy the main jet 70# can only find a larger one with 8mm diameter fells to large

[@jadd9328]

You mentioned in one of your videos that the carbs you were working on were for a customer rebuild for a customer. Do you work on carbs for customers and if so how would I contact you to discuss?

[@2-smoke]

@@jadd9328 reach out to me on Facebook: “2-Smoke Carb Rebuilding” page

[@smithchannel5369]

Can you recommend a dealer where to purchase the small MD13/24-0.5 jet, I am pretty sure my carb is missing this. I'm not having much luck searching online for that part number.

[@2-smoke]

@@smithchannel5369 call fox distribution, inc

[@mattyonkey6942]

Do you have a store? That shirt looks slick.

[@blahh53]

Is it worth to open accelerator pump to look? Even if I don't have parts

[@2-smoke]

@@blahh53 yes

[@taxicabyellow]

I have a 97 carb with no accelerator pump, and an 03 with pump. Want to rebuild a carb for my 03 GTI project. The non-pump seems much simpler, plus the pump is corroded and stuck in closed position. I also know there’s no restrictors. Can I get away using the simpler carb but with the needle seat and jets from the 03 carb?

[@2-smoke]

@@taxicabyellow I would use the larger pilot jet and try to out pop off on the lower side of the spec

[@taxicabyellow]

@@2-smoke thanks kindly, sir.

[@johnbruebaker1558]

How do I get the umbrella seals from you

[@2-smoke]

@@johnbruebaker1558 reach out via Facebook

[@peterarch]

How can I buy a umbrella check valve from you for my accelerator pump 2000 xp

[@wlalone2]

Need one ASAP! Just messaged you in FB.