How to rebuild dtr125 motorbike fork seals

Dtr 125 fork rebuild same as dtre forks thankyou for watching

[@sortt117]

bro through everybody else, your work is the hest

[@2strokemxclassics]

Thanks a lot m8 really appreciated 👍🔥

[@officialmysteriousrider6327]

Top lad they can be a bugger to get out nice one m8

[@2strokemxclassics]

Cheers boro

[@Supercarlsunday]

If i brought my bike bits in the house my Mrs would kill me lol

[@officialmysteriousrider6327]

🤣🤣👍

[@rdom4256]

lol same here, most i get away with is engine rebuilds up the table :-) I built a shed in the garden for the bikes instead :-)

[@2strokemxclassics]

The single life 💯women are a huge distraction they send is crazy ad hadda sell me bikes again

[@officialmysteriousrider6327]

@@2strokemxclassics 🤣🤣👍

[@Supercarlsunday]

@@2strokemxclassics Its o.k if you have the right woman mate. You got to get a woman that appreciates a man that's good with his hands.. 😁🙈.

[@lennoxedgar9847]

Hello m8t any chance u can do a water pump seal on a ktm 85 I have the kit

[@rdom4256]

nice one m8, i've rounded off one of my fork bolts b4, i tried using extension bars to hold the damnper :-( didn't think of using the rear wheel spindle, did you need to modify the spindle bolt to hold / fit inside?

[@2strokemxclassics]

I just welded the nut so it doesn't move m8

[@nickyjenkins5381]

The washer that's goes on top of the dust seal and under the clip is it needed mine don't have them and I can't find any on the fowlers website

[@2strokemxclassics]

I've had them with the washer and with it missing only thing I could see it do if missing is let the dust seal move up towards the circlip as when its on and the circlips on its a tight fit it keeps the dust seal pushed down m8

[@2strokemxclassics]

M8 I will check tommorow and see if the washers that's available on cmsl and fowlers what u drive the top Bush in with (with the flat side and rounded side) are same width as top washer if you get this meesage remind me on tommorow

[@nickyjenkins5381]

If those washers above the bushing are the same I might have spare ones on a broken set of forks

[@2strokemxclassics]

OK bro I've just woke up ill check soon for you an measure the thickness and compare them to each other👍

[@nickyjenkins5381]

Just checked the spare set of forks I have and found a pair they are a bit rusty but they should clean up nice. Apreciate your help and thank you

[@mrln247]

Someone else asked about the washer's under the clip, do you know if they can be bought anywhere? Need to buy clips anyway.

[@2strokemxclassics]

I don't think they make them anymore m8 it be best to buy a cheap set of rusty forks just for the washer

[@2strokemxclassics]

M8 go onto fowlers I've just checked they have the washer and clip

[@mrln247]

@@2strokemxclassics Thanks a lot, is there somewhere to get a parts list to go through? Amazing how much stuff some people get wrong, some really shouldn't be allowed spanner's without supervision.

[@2strokemxclassics]

Yeah m8 just go onto fowlers website, it's number 7 and number 3 on the forks diagram m8 put year 2002 cos some times if you put 1991 the bits aren't listed

[@mrln247]

@@2strokemxclassics Excellent, parts lists are handy. Are you confident the bottom washer fits on top seems odd they would have a different part number if the same size.

[@DaMuShErZ]

Hi mate, do you know the size of the bolt inside that you need to hold to release the damper rod?

[@2strokemxclassics]

It's the same size as a swinging arm bolt m8 19or 21 mm whatever the swingarm bolt is

[@DaMuShErZ]

@@2strokemxclassics Ok mate cheers 👍

[@2strokemxclassics]

No probs m8

[@2strokemxclassics]

@@DaMuShErZ it's 27mm m8 sorry bowt that just checkd the tool it's a back wheel spindle

[@AmarSulajmani-ok3iy]

How many miligrams ml of oil

[@2strokemxclassics]

What year bike