How to Recover your Data when your iPhone has a CPU Problem - iPhone 14 Pro CPU Swap

In this video I show, in real time, the full process for an iPhone 14 Pro CPU swap. This technique is necessary when the phone is severely broken and the motherboard has physically cracked.
The repair process involves preparing the donor motherboard by removing the donor board CPU, NAND, and EEPROM and preparing the solder pads for the data board chips. The data board chips are then removed, reballed, and placed onto the donor board.
This repair requires the highest level of precision and expertise. If any step is done incorrectly, the entire process will be unsuccessful. So great care is taken, patience is required, and testing along the way is important.
This is not a technique for beginners and should only be attempted by experienced experts in the iPhone Data Recovery field.
If you need iPhone data recovery, please fill out the intake form at my website: www.iboardrepair.com
Join my iPhone Motherboard Repair & Data Recovery Discord Server: / discord

[@ferhatkurt8898]

Good work!

[@LaTorreIphones]

genius! i would like to learn techniques

[@ezekielshub1188]

really great work. many techniques to learn from you. :)

[@iBoardRepair]

Thank you!

[@SURGE101]

Great work Aarron and great watch as well. Do like watching your videos.

[@iBoardRepair]

Thanks for always watching and commenting!

[@MAHMUDASERIA]

great job master

[@iBoardRepair]

thanks for watching!

[@cristisenchiu8059]

A.M.A.Z.I.N.G !!!!!!!!

[@nisanchannel]

Yours, shared knowledge

[@mr.george195]

awesome

[@muhammadawaismushtaq145]

I am always watch your new video and full because i am also a iphone engineer ❤️

[@iBoardRepair]

I appreciate that you watch the videos in full!

[@aibi5532]

that's not engineering

[@aibi5532]

this is repairing

[@mirceaalicu]

Hey Aaron! that chip that you wired is producing the pp5v1_touch_vddtx_s2 and the reset_L. You should have tried to power those lines first from an external source, maybe the swap wouldn't be needed

[@iBoardRepair]

Interesting! Did you know the net names by comparing to another board or do you have a software that shows the lines? Either way, I still had no battery data so I would have been stuck with 3 min reboot.

[@mirceaalicu]

@@iBoardRepair Oh, I know the net names as I worked at apple developing the boards :))) Just kidding... I had an interesting case with a 14 pro max with no touch. C5696 was shorted - it just connects to one of the pins of U9110. Very difficult to investigate... took me a while to figure it out this SMPS circuit. I have extrapolated from the 13PRO board which has a few net names on the display connector in the JC Drawing software which I rarely use. Also, compared with a good working board the way the supply works. An oscilloscope comes in handy for this crap

[@iBoardRepair]

🤣 I saw that you made an oscilloscope video but I haven't watched it yet. It is on my watch list though! I don't use one myself.

[@remon_to_you]

what microscope do you use? thank you)

[@iBoardRepair]

parco trinocular

[@ittechsolutions1764]

How much air for cpu removal I see temperature not air 50 or 80 ?? Thanks

[@iBoardRepair]

60 - 70 air

[@Mdibnefahad]

Sir,,,How much temperature and air you raise the CPU. Please help me..

[@iBoardRepair]

I displayed the temperatures in the video

[@mdibnefahad2779]

extremely sorry,,sir,, i didn’t notice this.. thanks for your reply...

[@BillAnt]

​@@iBoardRepair - Damn "It's hot in here, take off all your clothes...." old Nelly song. lol

[@Tribes11]

I hope you charged more than 350 for this kind of work, it certainly is worth it.

[@iBoardRepair]

I appreciate that you agree with that!

[@BillAnt]

Based on the crazy amount of work, this would easily be worth around $1,000, also depending on the importance of the data.

[@wucollins1727]

I would love to learn board swap from you, how can I contact you directly?

[@iBoardRepair]

Sorry to say I do not offer to teach or coach

[@wucollins1727]

@@iBoardRepair that’s too bad 😪

[@nhatbui9775]

That is optika ?

[@BillAnt]

Silly iPhones, if there's a lock code on the screen then a USB mouse dongle won't work (only if there's no code). Virtually all Androids allow the use of a USB mouse for touch to at least backup the data. smh I bet this was an expensive lesson for the iSheep customer. lol

[@senjanolabel]

MANA USER YG SUKA NGOMONG DI SOLDER DIKIT DOANG...... TAILAH KALIAN SEMUA

[@deepakkumar.420]

Hey bro my iphone 11 has reboot looping issue with storage full is there any chance to recover data from it????????????