HOW TO REFILL YOUR PRINTER INK CARTRIDGE & SAVE MONEY. EASY STEP BY STEP INSTRUCTIONS.

[@simmzzzz]

I like that you left in the mistakes rather than editing them out. Thanks!

[@VanzHumbleHome]

Thanks so much! I appreciate your feed back. I hope this was off some help to you

[@Phaedrus-th7bi]

I did it successfully........... The trick is that you MUST use suction to pull out the ink to start the flow of the new ink. I draped a folded-over paper towel between the ink cartridge and the nozzle end of a small shopvac I had handy. Turn the shopvac on for a few seconds and it will begin to suck out the ink to begin flowing. When you see the ink starting to soil the paper towel, you can stop the shopvac and install the cartridge into the copier.

[@VanzHumbleHome]

Excellent! That’s great you got it to work. It can be so frustrating. Thanks for checking out my video and commenting.

[@lvstream720]

I know your video has some years since filmed. But the most effective way to fill those, is with a dedicated machine, as i have.

[@Corgi_fax]

@@lvstream720 so to fill the printer's ink you bought another machine? Feels like it's not really a flex point unless you've made the modifications to the printer to be self-loading. Convenient? Maybe. Effective? Hardly. Ask any engineer.

[@lvstream720]

@@Corgi_fax Is a dedicated Machine that works under the same law of physics as The machines from a cartridge remanufacturer such as Planet Green. No air pockets in the Cartridges.

[@josephsimontacchi2285]

I think the little circuit boards know it’s Out of Ink on the newer printers. Tough to beat that.

[@deankay4434]

You can use a hair dryer to warm enough to remove the sticker if you feel you need too. Just a thought for others that have to have it removed.

[@VanzHumbleHome]

Great tip!! Thank you

[@deankay4434]

@@VanzHumbleHome It works on the favorite "Pilot G-2" ink pens. Slide the needle past the wax top cover and add ink to near empty bottom tube. I will admit however that's going to result in less viscous ink during use. I can't control the formula but treat it like a fountain pen. Let sit to dry for 30 seconds or blotter paper. In the 70's, we actually were taught to right like the constitution was written, except no turkey quills. I is cheaper than buying a 10 pack of G-2 pens with a 0.7mm tip for $18. $1.50 in ink was my calculation for refilling 12 pens & 3 magic markers! Have a luck one! DK

[@davidwright1752]

I am a older technician and learning from this young lady excellent video thank-you.

[@VanzHumbleHome]

I am honored you found it helpful!

[@delylahamm3045]

thank you for your instructions on how to fill ink cartrige.I bought the ink but it doesn;t give you instuctions. I did it your way and it worked! Appreciate your time for helping me and others with this problem with my HP printer. God bless you for your answer and solution!!!!

[@VanzHumbleHome]

Thank you for your kind comment:) Printers sure can be frustrating. Great that you were able to get your ink refilled n glad I could help! Blessings to you as well 🙏🏽

[@syedajameelahaliarfi6098]

The injection technique is very good. However, I had no time to wait. So I put the printer head in hot water for 6 to 7 minutes and the printer started printing immediately. When I took out the head from hot water, I rubbed it over a tissue paper till the cartridge head started giving me a real thick line and then I inserted the cartridge into my printer

[@VanzHumbleHome]

That’s awesome that you found a way to make it work! Save money too!! Thanks for sharing your experience. I hope ppl will see your comment and get theirs working as well.

[@syedajameelahaliarfi6098]

@@VanzHumbleHome Thanks. It was my first experiment. Thank God it succeeded. Plz do not forget to put a piece of small transparent tape over the hole where you put the injection

[@syedajameelahaliarfi6098]

@@VanzHumbleHome Everytime the printer is not printing, first dip the cartridge head in very hot water ( not the full cartridge, only its head) for 6 to 7 minutes, then take out the head, rub it over a piece of tissue paper. If lines emerge over the tissue paper, it is ready to print. No need to fill it with ink. If no lines emerge, leave it in hot water again the same way. It usually starts printing. Fill it with ink if it does not. Always put boiling water in a flat glass bowl then put the printer head in it. Never boil the printer head. If you do not put the ink in the printer cartridge the way suggested in the video above, the catridge will backfire the ink over your face, clothes & table. This ink can be removed with common white clothes bleach from skin& clothes both

[@syedajameelahaliarfi6098]

@@VanzHumbleHome Also never put the syringe with the needle in the plastic ink bottle. The needle punctures the thin plastic ink bottle. Put the syringe without the needle in the plastic ink bottle. Fill in the ink and then place the needle upon the syringe

[@Jackie-rc6cj]

Thankyou for info. I am so sick of the rip off ink rort. Your video was excellent and easy to follow.

[@VanzHumbleHome]

Glad it was helpful! Thanks for your comment.

[@samuelkonger135]

Your Voice is Much more Sweetier💕 than your your Instruction 👍 So to say, the Sweetest💝 of All!👌👌👌 Though I've been doing it since last SeveralYears, much before KZbin was launched(2003/4), I come across some videos who put Irritating Noise😖 they think Music!😡 Voice over is Always the Best!👍👍👍👍👍 6:37

[@VanzHumbleHome]

Thanks for the compliment:) the music is pretty cringe I admit. I get lost in all the options and end up making pretty random choices. Sorry about that. I hope this vid helped u save some money on ink at least!

[@AjaChineduGodstime]

You did a very good practical

[@VanzHumbleHome]

Thank you so much!

[@MarcyKMomBOSS]

Wow it’s way easier than I thought! Thanks for this great video!!

[@VanzHumbleHome]

That's great that you found it to be easy! It's nice to know that I can be helpful! thank you for watching.

[@heeeeeeeh]

Thx this is good to know since I'm getting a new printer and the ink cost so much its crazy

[@vanessavaldivia5989]

Crazy expensive, right!!

[@harold-p1l]

I do the SAME THING with my CANON BLACK INK cartridge (print in GRAYSCALE) and have the same issues BUT it works so I do it again about 4-5 times per cartridge before I buy a NEW ONE to get the NEW INK JETS on the bottom of the cartridge ! :-)

[@vanessavaldivia5989]

This sounds like a pretty solid routine! Thanks for sharing your tips.

[@VanzHumbleHome]

Glad you’re getting good use out of your cartridges too! Recycling is always a good thing! 😊

[@johnhaines2299]

Good job young lady, keep them videos coming!!!

[@VanzHumbleHome]

Thank you! I hope to start up again. I appreciate the encouragement.

[@marinvremes5702]

Good idea to use a vacuum. The actual vacuum tool ( specially made for this job) is £12 in England.

[@VanzHumbleHome]

Thank you! I appreciate your feedback.

[@cswan1541]

Thanks! I’m going to try this!

[@VanzHumbleHome]

Glad you’re giving it a try, let me know how it goes!

[@baldwinfrancis4030]

Wow how do i fill the hp cartridges for a Hp 9012e..where is the hole to fill in

[@fathimfmmfm]

Many thanks for successfully filling the ink cartridge

[@VanzHumbleHome]

Of course! Thanks for checking out the video:)

[@G0NZ-b9y]

Does it need to be a new cartridge or can it be refilled after os empty? In other wors does it get locked/flaged as empty once is empty?

[@vanessavaldivia5989]

Mine never locked up. It still worked

[@theophilusejomafuwe4157]

Hello guys my printer is not recognising the cartridge after refill what must I do please this is giving me hard time. The ink icon is blinking and I really don't understand. Please help out thanks

[@VanzHumbleHome]

Hmmm…. Maybe power down and restart/ reset it. I hope that would help. Do you still have the manual? You can usually get the Manual on line as well. I would start there. I hope you get it figured out. I know what a pain printers can be.

[@riorei]

I know this is way too long of a reply. If this still persist, hp doesnt recognize refilled cartridges. Its not a problem anyways. It would still work.

[@prasadkris4488]

I m als facing the same problem ? Pls help me

[@mariakochelorov1099]

D Hi there! Did you found the problem I have the same. I filled out my cartridge but still didn't print. And it said the black ink still empty even it's full. Thank you

[@gregoryburkhead7813]

​@mariakochelorov1099 it doesn't work . Hp chip is only recognized 120 prints . So after that .. hp disable the chip and the cartridge no longer works..

[@user-jo5fz8iw3b]

How do you know the date of a HP All in One Deskjet f4180 cartridge? I have about 5 empty ones and would like to refill the most recent ones, so as i dont fill a very old one and the sponge be dried out and leak all over the printer.

[@VanzHumbleHome]

Hmmm…. I’m not sure, try Google.

[@OdongoIsaac-s2d]

What if inside the cartridge is very dry. Mine is too dry and it print only ten pages and sometimes faint.

[@vanessavaldivia5989]

In a dry climate it’s a good idea to turn power off, I think i read somewhere that it closed off the ink heads so it wont dry out as fast. I’m not totally sure but I would try it. Best of luck

[@shermanneal7226]

Don't forget to cover the hole w/ peace of scotch tape, to keep sponge drying out..

[@anti-world6506]

This was very helpful. Thank you

[@VanzHumbleHome]

I am glad to hear it! Thanks for watching.

[@omilkhairmocsana2723]

hello I have hp 1510, any ink will be okay to use? (for refill)

[@VanzHumbleHome]

Hi there, yes, I think it would still work just about the same. It may be slightly different but for the most part fairly similar. I would at least try.

[@chunnuram9487]

After filling the ink in cartiage ,printer is showing low ink ,what can I do?

[@VanzHumbleHome]

Mine did the same thing. I’m not sure how to reset it but try turning it off and then back on again, maybe that will help.

[@yabsera-d4628]

Just cover one of the points

[@lfuentes4098]

@@yabsera-d4628what ports?

[@Zee-i4e]

Would this work for cannon ink or no ?

[@maddogwalt]

Yes canon cartridge you have to take sticker off both colour drill 3 holes black one you tube it for a video shows you how

[@niwamanyaplaxeda9159]

VERY INTERESTING

[@VanzHumbleHome]

Thank you, I am glad you liked it.

[@IzzyTrillz]

i love your intro lol😂😂

[@VanzHumbleHome]

Lol, thanks:) I wasn’t sure about it but I did it anyways.

[@kenhurley4441]

"IT'S ONLY INK"! Put a piece of scotch tape on the hope after filling. If you don't want to vacuum to move the ink, just set the cartridge upright and let gravity pull the ink through the sponge. Wear gloves to protect your fingers from getting ink on them.

[@vanessavaldivia5989]

Thank you! Yes, gloves are a great idea bc the ink does stain skin.

[@VanzHumbleHome]

Thanks for the extra tips! I’ll add that to the description.

[@britneysolano4404]

I’m stilling having that problem that it shows little marks how can I fix it

[@VanzHumbleHome]

Sometimes you have to clean the cartridge on the bottom. I put it in a very shallow amount of hot water. Just so the bottom of the ribbon on the bottom can soak. You will see where the ink comes through. Then I dry it really well and it usually is the problem. I hope you get it working! I know it’s a pain. Also, if you keep your printer on stand by mode the ink will fry up faster again if you don’t use it often. It is better to shut it off bc it should close the cartridges and they won’t fry out as fast. I rarely use my printer and I have to clean it almost every time I use it.

[@rudyyarbrough5122]

Why not BLOW into the hole to get the new ink to flow?

[@VanzHumbleHome]

I ended up doing just that. At first, though, I wasn’t sure it wouldn’t leave an inky mess.

[@minhafarook6404]

This video is helpful.Thank you

[@VanzHumbleHome]

Glad it was helpful! Thank you

[@jojojohn233]

Great job ❤

[@aliastreetman3930]

Awesome thank you

[@VanzHumbleHome]

Thank you ☺️ I’m happy to hear you liked it.

[@jppirr1031]

Where did you get the syringe from.

[@VanzHumbleHome]

Amazon. I thought I put a link in the description, I’ll have to update.

[@HiddenGully]

good video, gonna try it next time on hp 63

[@VanzHumbleHome]

Nice! Be prepared to sabe some money 💵

[@VanzHumbleHome]

Sabe? 😂 I meant save

[@gergemall]

Thank you. Great job.

[@VanzHumbleHome]

Thank you so much! I’m glad you enjoyed:)

[@libborr]

Doesnt work at all.. I tried everything. I tried hot water etc. STILL DOESNT PRINT

[@VanzHumbleHome]

Dang, sorry to hear it didn’t work for you. I hope it’s not something hard or expensive to fix. Good luck

[@xPTM1219]

Thank you very much for the video!! :)

[@VanzHumbleHome]

Ofc! Thank you for watching and commenting!

[@earlbucklin8323]

tor this morning you are my hero......................

[@VanzHumbleHome]

Glad I could help!! Thank you

[@trevorgray345]

Is there ink for the color cartridge? Or only works for black?

[@OdongoIsaac-s2d]

Yes

[@iiparachuteregiment8800]

How do u pass the instant ink msg?

[@VanzHumbleHome]

I Can't exactly remember, we moved and I have a new printer &it's just as much of a pain n I am wondering the same...

[@iiparachuteregiment8800]

@@VanzHumbleHome so it's pointless getting the ink kit

[@lfuentes4098]

@@iiparachuteregiment8800look up a video for your particular machine.

[@marinap5889]

You don't, you can only do this with regular OEM ink cartridges. The instant ones will get bricked and all your effort will be for nothing.

[@jerryjamify]

Awesome!!

[@VanzHumbleHome]

Thanks! I’m glad it helped.

[@imnfewirose876]

Ty so much

[@VanzHumbleHome]

Of course! I hope this helps you save a bit of money. Thank you for watching!

[@georgevanvalkenburg2560]

SPOT ON

[@VanzHumbleHome]

Glad it helped!!

[@roseannsabang2149]

What 's the need??

[@VanzHumbleHome]

Ummm…. Ran outa ink. Refill like this is less expensive and less wasteful than purchasing new cartridges each time they run out. Hope that helps!

[@davidwayne9982]

What about the colored one-- are there THREE holes--- red, yellow and blue??

[@Rosie-mz4bx]

@davidwayne9982 Yes 3 holes and your correct on the colors.

[@robert50173]

Yes. Unbend a paper clip to stick in the hole to identify the color.

[@lfuentes4098]

@@robert50173i used a toothpick in each hole. But the cartridge was so dry. I really had to shove it in. After filling with only 5ml it seems to be flowing out the bottom. So I had to syringe some out. In the video she used around 4ml it looked like even though she said ten. So I’m questioning what I did wrong. 😂

[@heavenlypot]

10ml must be too much for it. Must have overflowed

[@VanzHumbleHome]

Possibly, thank you.

[@frankbpook9370]

Yes black is easy lets see you do a color one.

[@VanzHumbleHome]

Any tips?

[@TheLeisamarie]

Time to watch paint dry....I laughed out loud, for real.

[@VanzHumbleHome]

😂 that’s great! Thanks for letting me know! I’m glad I could put a smile on your face 😊

[@najibsabor2624]

U don't need to remove the sticker

[@merfecs3429]

❤❤❤❤

[@CoojertM]

Printers are so so annoying

[@VanzHumbleHome]

True!

[@dungeonmasterelite2]

Heat the sticker with a hair dryer. Just don't overdo it.

[@NickBozziArts]

Minecraft music and sounds in background 💀

[@VanzHumbleHome]

Addicted…