How To Refurbish Patio Furniture

Hello everyone, Ward here! Today I would like to show you how to refurbish your old patio furniture once the nylon starts to wear. Hope you enjoy!

[@DireWolfForge]

Great idea using cedar fence pickets. I’d change up the process, however. Plane or sand your pickets first. Cut the width of slats on the table saw first, then set up a tall stop block on your mitre saw to the length of the slats and batch cut with clamps. Now you’re ready to pilot drill.

[@pamela9148]

I love how explain each step. I'm just learning and you don't assume we already know the basics. Easy to understand! Thank you for sharing!

[@mikektmrdr9005]

Just did two swivel rockers but I used PT 1x2's and applied my finish before assembly. Result was very nice. Toughest part was sorting thru the 1x2's at the store to get some nice pieces!

[@loriechase4101]

Looks good..Im going to try it on my project. My chairs require different size slats throughout the chair..but Its worth a try..thanks😊

[@kenday7942]

They do sell or you can make push sticks. Glad to see you still have all your fingers!

[@LGH1847]

Looks very nice. Always good to repurpose.

[@pamvogel5348]

Fantastic

[@kenyates144]

Excellent job!!! I have 6 frames that I'm glad I didn't throw away. Thank you for sharing:)

[@frankletizia7835]

I will try it . Better than sewing it. Nice job!

[@jimmywalters1036]

Great idea. I'm going to try this

[@Jennyhenrytube]

Omg I love this! I just got a free glider that has the seat ripped up and wanted to do something difficult

[@herbsu4330]

I am going to do a very similar job to my chaise lounge using 1x4 pt and Tek screws with a hex head. I could not quite see what what head you had but it looked like they sunk in flush. What screw did you use and where did you get it? I use pickets all the time as I make and sell birdhouses at our local county farmers market but I chose the pt because an 8' board is about the same price as a cedar 6' picket. Are we the last two old school guys that use a folding rule?

[@richardgarza1285]

It looks beautiful thanks

[@bobbernard8521]

Great job Ward, what length self tappers did you use? I'll probably go stainless screws.

[@manungneer561]

Awesome! Thanks 🙏🏽

[@robertcarullo4926]

I agree using PT, my question on that cedar, its 3/8ths does it hold the weight? but great Idea, I have swivel rockers and I did not want to change the material, which cost a lot, and you need to sewing machine, and it will dry out again. love this idea

[@terridavisford2160]

100,000,0000 Smartest Idea Ever thanks a Million

[@yatwanhayward411]

You the man!!!

[@billiesimmons1399]

Got 8 to do. First got to clean mold or mildew off the metal. Watch your daughter and you redoing houses in KC area.

[@hillarypatz7616]

I have similar chairs with ripped fabric. I'm debating between your method and just replacing the fabric (another vid. shows how). But I'm wondering how yours have held up these last two years?

[@waitiwaita6993]

Very cool.😊

[@22toomany20]

How many fence boards did you use? I have to sling back chaises that I want to redo.

[@grumpyjesse7842]

The wood piece keeps splitting at the edges when I screw in the screws

[@chrisgoodwin1154]

Self tapping screws aren't protected from rust. Your screws will rust immediately. You are very dangerous with your table saw I was gritting the entire time.

[@mikelewis4487]

I agree totally was waiting for the board to kick back or his hand to slip when trimming the board on edge.

[@cewaffles]

Same. I didn't like some of the table saw etiquette.

[@lh5923]

Absolutely...I'm not a wood worker by any means...but even I could see this guy was being very careless. The BIGGEST problem is unexperienced people will think this is OK. The project came out nice...just not the way to do it.

[@chickad5820]

What screw would you use versus the self tapping to prevent rust? You didn't say

[@stevenstorm9824]

Invest in a Craftsman Bench Top Planer. It’s worth your fingers or taking one to the face.

[@daniellefores4491]

This was amazing

[@timdurden5808]

Problem is, i started putying a few Boards on last nite, now there wett got Rained on, so it will be the Same when u get ready to sit in, u will have to wait for it to Dry!!

[@saraswatih9703]

👍

[@timdurden5808]

Are u Polyurethaning, u dont have to with Cedar right?

[@AbolishFamilyCourt]

Go boy