How To Relight Your Coleman Furnace Pilot Light!

My Gear:
Canon EOS R DSLR Camera: amzn.to/3vlrhCP
Lens: amzn.to/3vH2MiA
Lens Adapter: amzn.to/3KowkqH
Samsung S22+: amzn.to/3EI6n5D
Samsung Z Flip 3: amzn.to/3khebQP
GoPro 11: amzn.to/3LOVP6G
Wireless Microphone: amzn.to/3rYNKDU
Mic: amzn.to/37MZ8f6
DJI Mavic Pro Drone: amzn.to/37Q2pdt
__________________________
Head To:
My vlog dumpster diving videos: / bensbergfilms
______________________
Want to Buy a cup of coffee for me?
Thank you coffee keeps me making great videos:
Bitcoin Send Here: 1LoMfSUF9p9stdxPqHPnzE3EjcGWfodMMN
PayPal Address: [e-mail]
Venmo: Chris Bensberg
Ripple XRP Here: rPVMhWBsfF9iMXYj3aAzJVkPDTFNSyWdKy
______________________
Instagram: / chrisbensberg
Like Me On Facebook: / cbensberg
Twitter: / chrisbensberg
______________________
Subscribe Here For More Amazing Videos
/ tipsnntricks
______________________
Thanks for watching.
God Bless
Business Only Please: [e-mail]
______________________
In this video I show you how to relight your Coleman furnace pilot light. I'm hoping this will save you time. I hope you enjoyed the video, thank you for your time and thank you for watching.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, we’ll receive a small commission.
#pilotlight #colemanpilotlight #colemanfurnace #tipsnntricks

[@kellymaisonet2039]

This video saved our house LD during negative zero temps in the middle of the night. The directions had me trying to light it on the pilot setting. Thank you so much for this!!

[@DamonMcLean1]

This video saved the day! After 6 matches I watched your video and the tip “slide the pilot all the way to ‘set’ caused it to light immediately!

[@cqpandorabear]

I love you. This video saved our household of many exotic pets when the pilot light went out during the night. Thank you thank you!

[@brandonrober4016]

Thank you so much man! I ran into this exact same issue and had about the same frustration time 😂🤣 I appreciate the help! You’re awesome!

[@darrenochoa9211]

Your instructions worked perfectly. I even found that long rod to stick a match on to light it with hanging on a chain just like you described.Thank you.

[@teshayazzie3095]

Every yr I come back to this video. Thank you

[@scoffman300]

Thanks for explaining being quick with the match through the hole mine kept blowing out until I followed your instructions

[@dking1213]

Thank you. The instructions written on the furnace by a previous owner were not quite right or in the correct sequence. Thanks to your video, I got it re-lit with no issues.

[@Lydia-zk5ns]

You saved my family from another cold night, and my wallet lol. Thank you!!

[@iambsavage]

Thank you! This really helped me and I didn't have to pay someone to come and light my pilot!

[@lindasue1955]

Same furnace but with the black knob pilot light knob. Looking for THAT video.

[@BonnieLynn-nt3zg]

Thank you so much! You saved me. Perfect instructions, lit it first time in a couple minutes (PS - I'm 75 yr old female, not technology friendly).

[@NugsTheFloof]

Just moved in and was wondering how this worked. Thanks for the video!

[@ChrisMyers2000]

Thank you so much, I’m a new homeowner and have never had a gas furnace before. This was exactly my problem. Now to find out why it blew out. Probably needs a good cleaning I’m guessing.

[@dakotamiller1843]

Just saved me so much time and effort thankyou so much this video was a godsend

[@PandyCat-k5h]

Thank you very much, I actually got the old heater going (new to me) and FYI 9th match is the charm 😆👍

[@adamdoiron73]

This video just totally saved me. Thank you

[@timayres2405]

Brilliant, Exactly what I was looking for!

[@jesusislove336]

Thank you, Sir, for your very informative video! Greatly appreciate your time!

[@jacksonr2388]

Thank you so much for this video! It was extremely helpful!

[@bsraeder]

Question: I had a 1995 Coleman AirPro 75k btu gas unit replaced in 2021 with a Goodman 96% eff unit. The Goodman is using 4X more gas than my old Coleman in the winter (no leaks etc). I have done all research and questioning.. I believe these new units are not what they say they are for savings compared to the old units. Can you tell me why my newer, supposedly better efficiency unit is using more gas? Btw avg. temperature is the same in the last 2 years and temperature settings.

[@robertmontgomery3892]

Well...that's a good question and a good thing to know. I'm was thinking about replacing my old coleman but I will probably hold off.

[@themrmoy40]

on this coleman do you turn on the blower manually and off manually? or does it turn off on its on once temperature satisfied? thanks

[@DamonMcLean1]

It turns on/off auto set by the thermostat/once temp is satisfied at said thermostat

[@berryblueberry16]

This is the exact heater that I have… I can get the pilot lit, and I can turn it to on because I do have the push down pilot… unfortunately the flame when I turn it on burns right away but the fizzles out into nothing, air flow is good, line has been bleed of extra air. The only thing I noticed is the reset button is stuck in the compressed position… do you have any suggestions on how to get my furnace to keep a flame when I turn the thermostat on? I’m in desperate need of any feed back that may help.

[@Robinrae2010]

Did you figure it out?? Can't get the pilot light to stay on 😢 Coleman

[@lindasue1955]

We had to hold down the knob a good bit longer than described in this video

[@nickloves2fish811]

The long reach matches are long enough but keep a lighter handy if it goes out.

[@alexisgatta1208]

Omg thank you so much!!!

[@aaronsroom1]

worked like a charm...thank you

[@ellijaygalB]

So what is the pilot choice for?

[@180mph9]

Your video saved me 👌🏼

[@michaelgarrett2832]

Very good but my hot water heater pushing warm water out now should I buy a new or get a plummer.

[@TipsNNTricks]

Try to up the dial on the hot water heater first to see if when raising that dial for hotter water temp fixes it, if not then it might be going bad. How old is the water heater?

[@michaelgarrett2832]

Thank you my water heater is about 10 years old

[@TipsNNTricks]

To be honest it's probably on the end of life for it, I'd try the above fix and if no luck I'd replace it very soon before you run out of hot water. Hope the info helps, also I just switched over to a tankless water heater about a year ago and have never looked backed. Endless amounts of hot water, I have a how to install video on my channel. Have a great day:)

[@michaelgarrett2832]

Okay 👍

[@johnharley7290]

I just tried to blow mine out with fire on electric dust cleaner, and then I try to light immediately after that apparently the dust cleaner is highly flammable and it flew back a flame about 10 inches out of the hole when I stuck the match in it burnt my hand it happened too fast to scare me or it probably would have pretty good

[@docjohnson3980]

Thank you!

[@seanvatoflaco]

My flame was too high so I left it at set, and it calms down, is that good or vad

[@jacobchuning167]

Zippo sells a 13 inch grill lighter. Works perfect

[@LarryBrooks-km2ox]

So what do I set it on to light it 👀👀👀👀👀👀??? Cause one guy said leave it off an light it an that didn't work 👀

[@algernonsblackwoods5859]

Thank you sir.

[@lindasue1955]

The Black plastic piece broke that says Pilot and off. Bought another but the spring popped out and lost the clip that goes on the spring. Trying not to have to buy the entire $496.00 unit part just bc of these tiny but important pieces. Hanging it up again for today, still unlit.

[@sidroniogomez912]

In that hole where you light up the furnace if someone cuts the hole to make it bigger is this possible to get it fixed like wielded I just bought a mobile home and it has that problem it didn't pass the inspection because that whole was cut please someone tell me if I can fix this just welding a piece of metal with the same hole

[@DamonMcLean1]

I want to say yes, but also the inspector is probably looking for a sight glass/view port to ensure the pilot is lit. I’d try to match the plate to the hole but with the circle cut out of it, then weld it. If you need dimensions let me know. Worse case, I’d call a inspector and ask them

[@lindasue1955]

Does anyone know how to remove the screws in the triangular plate where the pilot light knob sits?

[@lynnhayes1435]

My pilot light hole has a plastic window that doesn't open

[@alexcampbell7184]

Mine too! Could you please tell me the solution as to how to get to it?

[@johnnytoppside]

Dude your instructions were not very clear. It says the keep the pilot dial OFF then light the match. After that it doesn’t clarify what to do with it after you light it. Not blaming anything up. Sorry