How to remove a 2020 Volvo S90 front bumper...

[@boogeyman-coitze6857]

Hi nice video! Can I ask you a question? To change intercooler pipe you have access after you take down the bumper? Thanks in advance!!!!

[@SteveSegrave-Daly]

John thanks so much for this video. I will have to replace my passenger side headlight assembly for my 2018 V90 Cross Country and there are no videos showing how to do this. Once I have removed the bumper will it be pretty obvious how the headlight comes off? Don't really want to pay dealer thousands of dollars as the part itself is already over $1000.

[@tomasz5750]

Perfect video 👌👌👌

[@MSSP365]

Excellent

[@jaktbitenjaktfilm1049]

Very good. Thanks!

[@davidlopez-fe2lb]

Is there a video of putting it back on? Also, this might be helpful as my parking sensor was hit by road debris and fell into my bumper, but when you removed the bumper do you have access to the parking sensors or would one need to remove more parts to get to them?

[@howtowithjohn581]

Hi,after removing the bumper ,you can access the sensors...if the sensor just came off the braket is a simple clip in...it will not fit in diferend way,only how is design to,have some locators... If the braket came loose then be carefull and follow the patern on the bumper...because you can glue it upside down...will still work but only after some time till it will selfcalibrate...if not needs diagnostic...just take your time

[@James_08_07]

Do you have to remove the bumper to replace the main headlight unit?

[@howtowithjohn581]

Yes...the old models had a slide in headlight,the new ones are bit diferent,but still easy if you know your way around tools...thx for watching sir

[@James_08_07]

@@howtowithjohn581 Reason I ask is my V60 (SpA version) is going to the dealer for a headlight assembly replacement under warranty. The bumper is slightly misaligned where it meets the fender and I was hoping it might be fixable in the course of the headlight repair, sounds like it should be!

[@James_08_07]

@@howtowithjohn581 forgot to say thank you for replying!

[@howtowithjohn581]

No wories...🤙

[@bruno.pbarbosa]

Hi, is there a way to remove the fog lamp without having to remove the whole bumper? I need to remove it to get it cleaned (there was some dirt that got in when driving during a heavy rainfall) but I would like to avoid removing the whole bumper if possible :)

[@howtowithjohn581]

Hi,take the scrues off the front side of the wheel arch cover and remove the wheel...then you have acces to fog light scrues...is a sealed unit because is led not sure how you can clean the lens without damaging the light...thx for watching

[@bruno.pbarbosa]

@@howtowithjohn581 Thanks, that's really helpful! I need to check the condition of it first, but if i am unable to clean it, at least I'll know how to replace it!

[@howtowithjohn581]

@@bruno.pbarbosa thx for watching sir...if you find my content useful dont forget to like and subscribe to suport my channel...is free and you can always change your mind