How to remove and install driver blend door actuator on 2015-2019 GM Sierra 2500 Not cold on driver!

Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com/@jvfix?lang=en
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!
=====================================================================

[@patrickmcnamee4618]

AWESOME VIDEO!!!! You saved me hours and hours of time. We service 20-30 cars a day, and all of the mechanics were impressed with replacement time. You are the real deal. THANK YOU

[@JVFIXLLC]

You're welcome! yea i have replaced many of these so yea i have a bit of practice already lol, but the first time was so hard.

[@taylorhebert1554]

Ima have to watch it again to make sure I get it all done right when I get off work I'm going change mine

[@JVFIXLLC]

it is a bit tricky but is possible to do it at home. good luck

[@taylorhebert1554]

@@JVFIXLLC thanks appreciate it

[@JVFIXLLC]

any time

[@captmorgan2063]

I had the same problem dealership wanted to charge me $1,200 because they're going to take the entire front dash apart to get to it for $35 part, this video is very helpful it's still a pain in the ass to get to that rear screw but it can be done for a fraction of what the dealership will charge

[@thefamilyway9825]

Been searching for days to find a potential fix for my wifes 2018 Suburban which has decided to only blow hot air from all the front vents, rear vents still blowing cold. This video is on point because now I know how to troubleshoot before buying new actuator(s) and can potentially get her some relief. Thank you!

[@rooseveltoggssr.9647]

Dude, your video was firing on all cylinders! Thank you!

[@JVFIXLLC]

thanks for watching

[@johnmattinson3513]

Great video! I got my part on amazon for like $35 bucks, I used a micro flex head ratchet with a torx bit. Worked right after plugging everything back in.

[@JVFIXLLC]

Nice work!

[@abeg3047]

Best explained and detailed video i could find ,thank you

[@JVFIXLLC]

Glad it was helpful! thanks for visiting the channel

[@eddieboy9349]

Great video brother now i understand how it works n how to fix it

[@JVFIXLLC]

thanks for watching

[@will24s1]

Really informative video very detailed. My 2014 was not getting hot on the passenger side

[@JVFIXLLC]

thank you and thanks for watching

[@timmartin3589]

Thanks for posting. This really helped

[@JVFIXLLC]

glad it helped. thanks for watching

[@albuechele8089]

Thanks for the vid brother!

[@JVFIXLLC]

no problem.

[@rolannandlal4369]

Thank you for this video

[@JVFIXLLC]

no problem

[@SuddenKhancer]

Good guide and replacing the actuator fix my issues. But wow that project sucks

[@JVFIXLLC]

yea it's abit hard to change it. thanks for watching

[@Diohernandez]

Awesome video! Thank you for sharing! How can you rule out these units are the cause of just hot air blowing? My ac blows hot air no matter what temp settings I set it on? Thanks.

[@JVFIXLLC]

if no cold air first check if your ac line gets cold and fan and compressor working. if all Is good just remove the door motor and u can move the door by hand. most of the time the problem is the blend door motor but is good to check first.

[@abeg3047]

Thanks

[@JVFIXLLC]

Welcome

[@captmorgan2063]

Great video, in the meantime i could just push the actuator flap manually for cold air right?

[@JVFIXLLC]

Yes you can!

[@UntamedOutdoorsmen]

I’m not fully understanding the actual removal process probably because it’s difficult to get a camera up there but when you’re removing it the gears need to be pushed all the way into the cold position. Then the actuator can come out and the new one can go in. But if the actuator isn’t going into it’s gears, you would need to manually push it?

[@JVFIXLLC]

yea you can manually move it

[@213funnyp]

You think all that dirt build makes it get stuck, will some brake cleaner help?

[@JVFIXLLC]

no it is actually a fault internally with the actuator. better change it

[@CSCHomes]

Once you swap and set the and set the other the bad one on cold, will it still blow cold air?

[@JVFIXLLC]

yea I did this test just to confirm if the actuator was bad.

[@jorgedelgadolujan]

When you replace the actuator do you habo to program something or it’s just like changue the piece?

[@JVFIXLLC]

no no need to program anything

[@juangandaria4090]

My truck is stuck on defrost do you have any videos on that?

[@JVFIXLLC]

yea it could be the same issue both motors are used for either temperature or door position

[@mannymartin142]

Could this also be a solution if i only have air blowing though defrost?

[@JVFIXLLC]

yea you probably have a bad one too

[@_raff214]

My AC blows mostly through the defroster . Could replacing the actuator fix the problem ? Thanks in advance

[@JVFIXLLC]

the one i changed on the video is for the temperature but in your case the one that actuates the doors could be going out.

[@marioolivarez3759]

Would removing the radio be a lot easier or there no way to get to it from their?

[@JVFIXLLC]

it could I haven't tried it

[@laurawise7107]

How do you get the bottom plastic piece off? A lot of things you removed off camera. I don’t want to break anything. lol

[@JVFIXLLC]

u need a 5.5m socket to remove the bottom cover is very simple

[@gabrielmartinez7193]

Tengo una 2014 chevy silverado texas edition el chofer avienta frio y el pasajero caliente y revise y tengo el mismo problema en tu video pero ya puse el nuevo motor y todavia se keda atorado con 3 dientes afuera no gira todo completo para el frio que mas puede aser

[@JVFIXLLC]

pusiste motor original o aftermarket?

[@gabrielmartinez7193]

@@JVFIXLLC lo compre en autozone pero parese que no son originales me dijieron que si tienen que calibrar con un scanner

[@raulinfante8955]

So no need for a scanner tool to recalibrate correct?

[@JVFIXLLC]

yeap no need for that

[@Yos674]

In a 2014 Silverado is it in the same place?

[@JVFIXLLC]

yeap same location

[@Yos674]

@@JVFIXLLC 👍

[@jccanatlan1]

Donde te encuentras para servicio?

[@JVFIXLLC]

estoy en el area de visalia California

[@marioalvarez3948]

How did you remove the last one

[@JVFIXLLC]

the one behind the glow box is the hardest but the one at the bottom is only 2 screws size 5.5mm or 7mm I think

[@MrJunior6939]

Necesitas desconectar la batería ?

[@JVFIXLLC]

no no se ocupa desconectar

[@Thefishingplumber]

@@JVFIXLLCthanks gracias amigo tengo la misma pregunto lo boi intentar

[@spacedog879]

My dealer wants 2k.. 😅😅😅

[@JVFIXLLC]

what? how? that's insane

[@dopeitsfelipe7117]

how much does a job like this cost ?

[@JVFIXLLC]

I charged 150 for this job.

[@sapochingon98gmail.comsapo88]

Muy completo el video!! Gracias!!

[@JVFIXLLC]

gracias por visitar el canal. saludos