How to Remove and Replace a Broken Coil Connector

[@Deutscheautoparts]

- We appreciate your Support and Purchases! -Find all the parts for your VW or Audi! - www.shopdap.com/ Ignition Coil Connector with Terminal Tool www.shopdap.com/ignition-coil-connector-20t-tsi-fsi-25-5cylinder-vw-audi.html How to find Misfires on your VW or Audi (Pre 2015 Models) kzbin.info/www/bejne/pZqbkpqwprmJjLs

[@flynbike]

Rock solid. Splintered two of mine changing coil packs trying to clear a misfire code, and stumbled on this. Ordered replacements from Deutsche and had them in within a few minutes. You can do it, my people!

[@kellymurphystl]

Thank you for taking the time to make this video. As someone who owns a 2.0 TSI VW, I really appreciate you illuminating this murky subject!

[@MohammadSyed-y2o]

Never in my life have I seen a better outro. Sold. And not because the car decided so, I'm getting an extra connector just out of gratitude for helping me getting my car running again this year :'-)

[@tedjohnson64]

Very nice tutorial! I didn’t realize the connector could be replaced, I thought one would have to replace the entire wiring harness.

[@smkinrade]

That'd be silly

[@dennisakoglu2718]

So no need to change the wires just the connectors and all good?

[@tedjohnson64]

@@dennisakoglu2718 Hi Dennis, you're correct: just need to change the connector. The wires usually don't get damaged, but the connectors get damaged all the time because the process for properly disconnecting them is not obvious, so people tend to manhandle them and break the fragile plastic. Therefore it's actually really nice that there's a way to replace a damaged connector without having to replace the whole wiring harness :-)

[@dennisakoglu2718]

@@tedjohnson64 thx for advise bro

[@timmyturner999_]

@@tedjohnson64just did this on two of my connectors because after the first one I still didn’t get it wow I’m a dumbass

[@Davekinematic]

Thank you so much for this video it kept me from breaking mine and I was able to get it off instantly after I watch the video and I'd already spent 20 minutes trying to figure it out myself😂

[@jamesfranko5098]

It shows you how bad the design in that it's not immediately obvious how to work it.

[@TheNortheastAl]

This was very informative, Paul. I had no idea they were fairly easy to replace. I was sweating it when changing plugs a few months ago just waiting to hear that familiar “snap” of plastic breaking.

[@phonkyfeel1]

I’m frustrated that I can’t source a taillight socket anywhere. But maybe this video will be my work around. DAP, your videos are really good. Thank you

[@progmanmike]

Great video, I'm gonna be doing this now.. I thought it was normal to have a wrestling match with the connectors

[@Ngcarson1337]

Bought connector from you after watching this video, but it was the wrong one! Had to end up buying mine straight from the stealership for half price, but at least they’re fixed now. 🙏🏼

[@skinnytinny9023]

Thanks for showing how the clip works, had me foxed.

[@gplusgplus2286]

This is the simplest, quickest not to mention cheapest fix that no pro mechanic fixes ever.

[@phonkyfeel1]

Ok?!?!

[@copper5597]

Thanks for this video. I just replaced 2 connectors and saved lots of $.

[@que_bta880]

Thx u man! The best explaining & understanding video about this connector situation on YT…. I was going to give up but good thing I had found your video…❣️🤞🏽💯

[@mk6_csg978]

Paul thanks for the video. I need these connectors since all 4 are broken on my gti and I’m going to buy it from you guys 😎 👍🏼

[@Deutscheautoparts]

Thanks for the support. We appreciate it very much!

[@nickkk420]

Rat chewed up my camaro electrical wires connectors, deff needed this thanx

[@fabiaardechois7585]

thank you on behalf of my r36 for an easy brand new connectors install :D

[@as242006]

Nice vid! Great to see you have an easy replacement kit. I will be sure to buy from you guys when I need one.

[@stevesykes68]

very helpful, thank you. now I'll go buy some replacement parts from your web site

[@rossbowman202]

Sorry, I have a MK6 Golf TDI, but I did enjoy learning and the video. Please continue the relaxing content. What is the plan with the touareg?

[@atlasthehatless3624]

Only reason Im watching this is cause one of my wires broke off from the back and I needed help on how to fix it good video btw

[@scirockalot8v]

I have used a paper clip bent just right to release those pins.

[@springfever2002]

I just wanted to say thank you for your comment. I was struggling with trying to get the connectors to release and the paperclip method worked 💯.

[@clayniemann2608]

I finally got around to doing this on my Tiguan. It really wasn't as hard as I thought it would be.

[@TheStuntViking]

I have no fire on cyl 1 after intake manifold replacement. It's not coils or plug, but I did damage the connector a little. Could that be the reason or is there anything else it could be, like a fuse?

[@noahcola5131]

Is this the same with the mk7 gti? I have a 2015 gti and want to replace the one I broke.

[@luckylukekansai9594]

Thanks Paul! You saved me an expensive visit to the dentist as I was about to rip those damn connectors off with my teeth

[@KyleAndersonSkates]

I feel like I should buy a connector from you. And none of mine are broken.

[@gilbertfranco4163]

Ere 4xe,xx,,x3,,,3xx3x

[@laconabrown2084]

I want to buy connectors from them too, and mine are probably broken, but I spent all my money on gasoline cuz I'm running too lean. Uuuggghhhhhhjh pray for this girl, much needed.

[@keithmclachlan4612]

I cannot for the life of me find where to order the little metal clips that secure the coil plug connector. It shouldn't be this hard! Anyone have a part # and ordering info for just the securing pin itself?!?

[@nightmarearchives]

Hello, My Audi doesnt have this connector on Turbo Sensor, will this type of connector which connects Coil work on Turbo ??

[@Jordandevos444]

Ive got s 97 lincoln town car, check engine light was flashing and rough idle and hesitation/shakes when accelerating. took it in to get the spark plugs changed. And it Was worse , checked the engine and a coil connector was unplugged so i plugged it back again and its driving better but i got another flashing engine light today. Thinking maybe its the coil connectors? Or one of them ? They look old a tattered. What should be my next move to get done at the mechanic ?

[@foxxxyred1662]

What if you don't have that releasing tool for the wires? Can you splice all the wires with the new connectors?

[@clayniemann2608]

I wouldn't. The tool is best, but if you have new connectors the old ones will likely just fall apart. The little plastic piece separating the wires facing the coil is thin and usually brittle. Most fell apart when I did mine, but you could do the same thing by breaking it off with some needle nose. Pull it forward. Pull the wires out the back. Just be really careful with those wires.

[@Nathan.scott95]

Does it have to specifically be this one because I bought a genuine one and its the right piece just my wires won't snap in so does it have to be this one?

[@Pelinas]

Thanks for detailed explanation, great video, do you need to disconnect battery before you work on coils adapters??

[@OneIdeaTooMany]

I pushed down on mine and they snapped. The tabs were really difficult to push down. Using a 90 degree pick is probably easier.

[@pmfkeim6330]

When I did this I didn’t unhook the battery in two of my plugs soldered together in now I have no spark do you know what could have happened?

[@shiv.seeking]

Awesome thank you this is very thorough much appreciated...now I can buy a VW tiguan and rest easy :)

[@treeleafytree]

Hey so I broke two. Could this cause a code to say multiple cylinder misfire? Engine runs fine as if there isn’t a problem and not check engine light… weird

[@conman7975]

Hey guys after watching this video I was stoked to go put new connectors on after seeing how easy it looked...I forgot to DISCONNECT my BATTERY and while unplugging them from the rear two of the wires touched making a little zap. I finished putting all the new connectors on and now my car will crank over and will not start.and now hood is flashing red on dash. What do do,Did I try the computer or is there a fuse or relay I should be looking for?please help me..

[@Lovely_planet]

just did this lmaooo

[@Lovely_planet]

btw its the 20a fuse in fuse relay number 8 under hood under windshield wiper tank on drivers side (left hand drive) replace and should be good to go.

[@Bobbybauer1]

@@Lovely_planet I didn’t disconnect my battery either. Now I have a rough start/idle and check engine light. Same thing?

[@hoopersmith]

I broke a purple locking tab is there a place I can buy replacements?

[@dusty_five_2]

Good intel 🍻 bought one and prior things and future things. I appreciate the great instructional videos. Showing support in return by shopping for parts from Deutsche Auto Parts is the least people can do.

could a damaged connector cause the vehicle to misfire?

[@petervazquez5668]

Yes.

[@YourPointOfViewPodcast]

Yes mostly definitely

[@StaccatoRedFox]

Yes

[@babywipes1032]

yes, if it doesn’t throw a check engine and it’s misfiring change spark plugs and then check the packs, if the connector clip is cracked it could be not seating all the way down and causing misfire

[@davidclifton6666]

Yes, most definitely

[@solanogu]

Do you sell the connector for a 2018 Tiguan MAP sensor? The one with the gray tab?

[@smallvillecastillo3565]

hi , Humble mechanic , my scirocco 2.0 tsi need a fuel pressure sensor replacement can you please do a video on how to do it? cheers

[@chiiief641]

So mine is an Audi A4 2007. I changed the coil packs twice and the spark plugs. Still had an issue with #2. Would this connector fit on the audi?

[@faisalnazir710]

Apricated sir , plz teach us how to replace camry 2007 2.4 MAF connector , I found 2 times when i am gonna fix its break even I baught special pins open tools form amazon but still cant open ...still all over youtube no one uplaod any video regarding camry 2007 MAF sensor connector replace or repin...many thanks

[@robertwade9393]

Great video! thanks for making this video, it is very helpful.

[@highmilescreator]

best video on coil connectors info/instructions clear and easy perfect for an vw owner,showed me how to remove the wires correctly. #skylog #Ayiinmyke

[@Abdullah-ry2wq]

Same for mk7’s mqb engine?

[@kevinnelson7070]

Where can i get a terminal tool like that one?

[@Khalsa-bt7jx]

Can a broken ignition coil wire connector cause a misfire?

[@donovanowen3089]

Is this good for all engines with them? I have a grand Marquis

[@tenochmochtesuma5948]

Thanks man your video helps me

[@VIVAELERIC]

Is it possible to buy just the terminals for the wiring? My connectors are not broken but noticed that my terminals looked oxidized. Used some electric terminal cleaner in the mean time.

[@gigepimenta8558]

Hi, my name Genival, very good video I have a Passat highline 2.0 turbo When I changed the connectors I forgot to take a photo of the wires, Could you send a photo of the thread sequence? Thanks

[@Kongieee]

Just my clip broke. Can I continue to drive with a single broken clip?

[@pluckypettaway2929]

Hey I have a 2004 Nissan Marano I got a tuneup and cylinder one still misfire what could possibly be the reason why only one still misfire

[@phonkyfeel1]

Great video!

[@Freakezzz]

I have 2 broken. I’ll be buying!

[@jonathanblanquel]

Do you need to unplug the car battery ?

[@rustyechols3608]

Super helpful!

[@Buciasda33]

Thanks, I have to replace a couple of connectors. They became brittle after 20 years...

[@shaquizzle5548]

What size terminal tool do we need to use? I need to replace a connector plugged into my intake

[@jaysonbrendon8435]

Hi don't you have a video to replace a ignition coil pack on the golf 5 gti fsi {bwa} engine

[@spencer1320]

Could you guys please do a video on a MK6 GTI reseal cam cover.

[@leonardoreyes8517]

Love the ending!

[@JasonRose1976]

Hoping I can do this exact thing on my 2015 Hyundai Veloster Turbo. Not sure though.

[@BipDragon]

Hi there, if the number of the wire is not correct. What will happen if we try to start engine? Thanks

[@monicaburgueno4664]

Very good videos

[@Specter1031]

I broke 4/5 of these on a 2010 2.5. I will buy the replacements from DAP! Do you need to disconnect battery before doing this or is there no risk of some sort of electrical damage?

[@ItsDevOps]

Mine is really bad - can replace the complete harness? Is this available at your online store?

[@luiszubillaga1463]

Is it necessary to disconnect the battery to replace a connector?

[@herneyamontoya8648]

Yes! After replacing all four on my Audi Q5, accidentally 2 times the wires got together for 1-2 seconds making sparks, now my car in not starting, I checked all fuses, all are perfects but I am not getting power to the ignition coils; does anyone have any idea what could be happening? Also I disconnected the battery just trying to reset the computer, but it didn’t work

[@bradlien5361]

Is this the same for a 1.8t

[@MrDjmurdock]

Where can I order a new wire with terminal on it ?

[@محمدعبدالباسطبستاني]

hi mak i thank you so mushe -you helped me

[@32mrkoon]

Do you have these for a 2016 3.6L V6?

[@TSI_M5]

Hey guy help me out I forgot which colour wire on which pin no. (1,2,3 or 4) I don’t know & the is a heavy misfiring

[@chrischen5979]

Hi where can I buy the pin tool ?? Thanks a lot

[@Samirkerbadj74]

Paul help please I have an engine that shakes badly after we thought the problem was the injector!! Well, we had to change one of the injector's but the rugh throttles and shakiness still there!!! What do you think it is the problem mate!!? AHH!!! I've got a 1.6 TDI VW engine by the way. Thank you Paul

[@beerekartheek9184]

Thank you, very helping video

[@hugoreyes6757]

I'm having a problem putting it back after valve cover seal replacement

[@utbasat]

Very great video

[@vindieu]

I just broke 2 of them trying to replace the coils. now I have utra crap idle, and broken connectors.

[@CR15PY1]

Hi what ob11 reader do you use?

[@Deutscheautoparts]

www.shopdap.com/nextgen-obdeleven-ios-android-vw-audi-scantool.html

[@HondaBassInYourFace]

I was gonna buy the tool from yall but it says its on backorder 🙃

[@EatgreedyNick]

What if all the wires are black? I messed mine up on 2011 Altima and smelt a burning smell..HELP

[@BradleySevenfold]

Very informative, I am going to fix the one I broke on my 1.4tsi ACT CPTA engine, only thing is what kind of terminal tool will it be? I would order from you guys but I live in the UK and don’t fancy paying £10-40 in import duties, I have seen a laser branded one which I have good experience with (with their thin spark plug extractor) part number 3932 ☺️✌🏻

[@chanceification]

Can you make a video on a bad dsg dmf I’m so confused on how to tell if mine is going out or not

[@dB_944]

Is that the same connector as the fuel pump? (2004 Passat)

[@echoinstrum2786]

Hello! Might be a longshot but i really really need help with my Volkswagen Tiguan 2012 160HK Engine code: CAVD, CTHD. I've had my car in to the local workshop/repairman who has changed all 4 Ignition Coils, all 4 Spark Plugs and also tried to change positions of the new Ignition coils with each other to see if the "code-reader" the pc or whatever i should call it would say anything new. Translating with google on alot of these things, sorry for that. so to the problem: The scan/reader gives error messages: P035100, Passive/sporadic, ignition control cylinder 1 malfunction. P230000, Passive/Sporadic control ignition coil 1 short circuit to goods P050700, Active/static, idle control speed above the setpoint. P227900, Active/static, leakage air into the intake system. P030100, Passive/sporadic, 1st cylinder combustion ignition located P130A00, Passive/sporadic, cylinder removal(Maybe should be cylinder opt-out) P030000, Passive/Sporadisk, combustion fault ignition located First it only showed the passive/sporadic error codes the first 3 times i turned it in to the workshop. Then more came. The car can work normal, but the engine light is on. then suddenly the car can start "shaking" and the more i try to accelerate the more it shakes. As said before. The repairman has tried to change all ignition coils and all the spark plugs. Now he said i could try and search around on the internet to try find what is needed. He is pretty old and not that good with computers, that's why he asked me. Please, can u help with the problem ?

[@13daprofessor]

This may be a crazy question but are the connectors for the coil packs the same used for the tail lights? I have an '06 A3 8P. Thanks.

[@danielulloa5318]

great vid man

[@sharkeishako]

Thank you for this tutorial!! I ended up breaking the clip from the connector harness but it seems snug. Do I need to replace? Or do you recommend a replacement?

[@bustercherry9506]

Just did the same thing today drove it around didn’t misfire or anything so I’m assuming it was pretty secure but I would personally still replace them just to be safe

[@Secretary.of.Education]

Zip ties ftw!

[@rafaelricardopinoarevalo2326]

Thanks 🤩

[@ZuzpiciusAir]

what is the part number for this is it a VAG original part? i found the ones that need you to cut wires and stuff

[@ZuzpiciusAir]

Also it's not in stock in your webpage

[@donbrashsux]

Excellent info..

[@FranciscoBarros-gy5dz]

Pode cortar os fios e emendar por favor me responda desde ja agradeço

[@81jovic]

Nice video Thanks!

[@francescopastino]

Similar process on Mk7s?

[@Deutscheautoparts]

Yes

[@jhemnes1]

Great video

[@Mm-wf3wx]

I need help taking out the little connectors 😪