New Ignition Coil Connectors Toyota Highlander/Camry/Sienna/Solara/Avalon

[@BigDipper79]

Do you know where you bought the kit? Thanks.

[@tongo117]

The kit I used is shown as out of stock but this kit has the same 90980-11885 part number.. www.amazon.com/Yonput-Ignition-Connector-90980-11885-Replacement/dp/B0BRZWH3Y8/ref=dp_prsubs_sccl_1/134-4514066-3574960?pd_rd_w=JSnxi&content-id=amzn1.sym.3ad0ccdf-fd9f-4ec9-a400-2b1165fdcd58&pf_rd_p=3ad0ccdf-fd9f-4ec9-a400-2b1165fdcd58&pf_rd_r=GEDV6BRB7HHX9ZBHCQMX&pd_rd_wg=pQma6&pd_rd_r=8d3b1407-512e-4036-837a-13f35c07b523&pd_rd_i=B0BRZWH3Y8&psc=1

[@CarlosBarbieri]

Amigo, mas não entendi, vc comprou os cabos e conectores novos, e só trocou os plugs de plástico? Tenho um Toyota rav4 e troquei as velas e bobinas e agora comprei os conectores, ou seja terei q fazer o mesmo o q vc fez aí no vídeo?

[@josebarrios9808]

Oh my god, I'm speechless. Thanks friend, well explained. thanks for teaching others

[@tongo117]

You are welcome.. Glad to have helped..

[@heatherkoenig4824]

Thank you so much for this video. Changed the plugs in my 2010 Camry today and the plastic connectors were just crumbling. This was a WAY easier fix than we were expecting. 👍

[@tongo117]

Glad the video helped you.. This is the guy who helped me.. kzbin.info/www/bejne/rYildJqPbtOBlZI

[@Bionicjoe]

THANK YOU! The plugs broke years ago when the mechanic replaced the plugs. We once lost major power and found out it was the plugs. Ever since I'd just re-seat the plugs and ignore the warning lights. Ordering parts now!

[@tongo117]

You are welcome.. Glad to have helped..

[@GreasyStool]

Nice! Just replaced all 6 of my 2016 Tacoma Sport plugs and wondered what would happen if I busted one of these. Shop quoted 650.00 to replace just the plugs!

[@StephenRitchie-fl1qc]

Owned a 1995 Camry with the V6. Car was great until everything thing started falling apart. Wire connectors and plastic parts became brittle. Even the interior was breaking down and putting off a chemical smell.

[@meazz1]

Great video, excellent DIY tip.

[@tongo117]

Thanks..

[@petepeterson5337]

Excellent video! This is WAY better than butt-splicing those wires. I wonder what those Nylon tye-wraps are for, with their glass transition temps of 50C to 70C. LOL!!!!

[@maximofeliz6498]

thanks very much, very nice ,quik and clear, bless from Dominican Republic

[@tongo117]

You are welcome.. Glad to have helped..

[@mitchsiripanya3870]

Great job, Thank you

[@JaguarMikey]

Thanks for the video!

[@tongo117]

You're welcome..

[@donmccoy1074]

Outstanding video. THNX a ton......really help make this simple. Again, THNX

[@tongo117]

Glad to have helped..

[@auntdiane1578]

The wires were so brittle they broke. Can't we use the wires that come in the new cases?

[@1985Yugo4Life]

Should you disconnect the battery, prior to changing out the housing?

[@tongo117]

you can if you want to but there is no power going to the connectors unless you turn the ignition on..

[@1985Yugo4Life]

@@tongo117 thanks!

[@khalidrashad-xu8xe]

These look like very poor quality connectors. My 17 years old Suzuki Liana started giving trouble because of poor contact and not damaged connector housing . Toyota apparently has bought a bad batch . Wish you can send me the wires with the metalic grips 😅

[@luizseabra5640]

Thank you

[@tongo117]

Glad to help..

[@reginarutledge8210]

No ma’am, it’s not