SUBRCRIBE FOR MORE TT VIDEOS!!! / @xnachopandaxx FOLLOW ME ON INSTAGRAM! awzkar_?hl=en Couldn't find a video on how to remove the TT's door panels so i decided to make one. first ever tutorial
Пікірлер: 25
@homebrewinstrumentals77004 жыл бұрын
Why can't all door cards be this easy to remove... Thanks pal.
@TTwsm3 жыл бұрын
Great video! I would suggest popping the other sides of the rubber corner panels out of the metal of the door itself, rather than from the plastic door panel. It’s much easier to get the rubber “posts” back into the metal holes on the door than the plastic ones on the panel. They’re a tight fit, and the plastic will flex when you try to push them back in.
@adamshaw10322 жыл бұрын
That’s a top tip!! I’ve just found out the hard way!!!
@sandyshine66905 ай бұрын
Good idea makes sense 👍thanks for the advice i need to remove my mk1 tt 225 door panel to remove a dent and replace the window micro switch 🤙
@bigbaddaddio7 жыл бұрын
Nicely done! Still, I don't recommend using a drill on that bolt; just use a hand driver. Snap that bolt, cross thread it, or strip the insert nut and you'll never find anything like them, ruining your whole day!
@markmuller88297 жыл бұрын
Excellent tutorial Gabriel. Very clearly explained and demonstrated. Well done!
@lobostechnologies42982 жыл бұрын
Very helpful thanks man! I busted my door lock cylinder and they’re charging me $900 US total for the job, I’ll be doing this one myself lol
@xNachoPandaXx2 жыл бұрын
Yea i would be replacing that too lol hope everything goes smooth for you 👍🏼
@harryday23802 жыл бұрын
Really useful, thank you!
@paulabodkin2444 жыл бұрын
will a 2004 tt interior door panel fit on my 2001 tt?
@billparry795 жыл бұрын
Yeah great advice, thank you
@andrevanderwesthuizen77275 жыл бұрын
Very helpful
@homebrewinstrumentals77004 жыл бұрын
Them speaker connections are a nightmare!
@kinggrimmjow89802 жыл бұрын
Can I take a door panel from a 2010 audi tt and put em on an 05?
@IzZUnTouchAble Жыл бұрын
I need to do this somehow while my doors shut and I’ve tried many ways to open it to access the cable
@johnmackay57844 жыл бұрын
Thanks!
@kaylapeters34375 жыл бұрын
Hey dude, love your videos. Do you know how I can install some door light projectors (puddle lights) into my Mk1?
@xNachoPandaXx5 жыл бұрын
I had looked into the idea, even bought the slide puddle lights but never got to it I think it would be an easy instal as long as you wire everything well
@kaylapeters34375 жыл бұрын
Gabriel1996 any advice as to how I do this?😂
@xNachoPandaXx5 жыл бұрын
Theres an already existing “square” on the bottom of the door it has a plastic piece that you can take off i never tried to fit it in there or anything but that would be what i would use and obviously take off the door panel to route my wires thru the where the oem speaker wires go through and just fish the wires to where the fuse box is (driver side panel on the dash) after just use a volt meter and test what fuse you wanna tap into and done lol pretty simple but i know its alot of work 😂
@kaylapeters34375 жыл бұрын
Gabriel1996 damn🤣 I’ll ask an electrician. I love your car though. Mine is getting sprayed at the moment. Been away for almost 3 months. Can’t wait to see it
@seids75984 жыл бұрын
how did you disconect that metal wire which was conected with doorlock?
@xNachoPandaXx4 жыл бұрын
Seid S literally just pry it carefully
@leffjegg12902 жыл бұрын
I have 2001 TT. driver door will not open from inside....or outside....any suggestions?
@boastyy Жыл бұрын
That's a tough one as you normally have to open the door to remove the inside panel. The inner door panel pulls up once the single bolt is removed from behind the silver round cap, but there are two rubber pieces which have to be removed to allow the panel to slide up. Can't see these being removed with the door shut as there's no room. I would spray inside the lock through the key hole with wd40, then try opening it with your main key. If that doesnt work, if you have a spare key try that. When you use the fob and press unlock can you hear anything happening on the driver's door. If the door lock mechanism is broken then there might be a way to get to the lock with a wire between the widow and seal but not sure if its possible. The door handle might have to be removed from the outside to get access to the lock, not sure if you can do this in a non destructive way but if you can't might be able to replace with a 2nd hand painted part off ebay . The door lock is quite cheap as well about £30. Good luck.