How to Remove Clock Spring 12-14 Nissan Versa

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@alfonsorodriguez3475]

Awesome video… gotta get working on this now😂 for my wife’s car. I am gonna be the one here to say I am missing the test video where you show us it works.😂

[@ubnt00]

Awesome video, helped me get the job done today on a 2008 nissan versa.

[@devinnn39]

I was a little stumped how to undo the wire harnesses in there so it helped to watch someone do it 👍🏻 I managed to do it without removing the plastic body trim pieces entirely just popped them out enough to reach in and get it done 😊

[@AlejandroRodriguez-nb4og]

First off, LOVE YALLS VIDEOS! Second, Is there a video for a clock spring replacement on a 2009 Nissan Rogue? 🥺 can’t find it anywhere

[@remkye]

Thank you so much, the hardest was pulling the airbag..crushed my fingers a bit. I did it on a 2010 and is very similar, didnt have to remove that metal bracket. Also new part came with a plastic piece that needs to be removed, is only there so new clock spring doesnt rotate. Thanks again!

[@1AAuto]

+Remkye Henriquez Thanks for the feedback!

[@CarlaScott-y3t]

How much does a clock spring cost

[@bigtex970]

I need some help, I was replacing a blower motor on my 2016 nissan versa note, I disconnected the steering at the top of the column and forgot to straighten the wheels they were turned, Now my steering wheel is off center about half way, can this be my problem, can disconnect it turn the steering wheel straight and replace these parts?

[@johnc.63]

Are there screws and covers on each side of the airbag /horn assembly?

[@jefffickenworth1795]

for reals

[@kahlilgibran563]

Will what's done in the video work for replacing a clock spring in a 2008 Nissan Sentra?

[@1AAuto]

+Kahlil Johnson It may be similar, we currently do not have this video on your specific vehicle.

[@kahlilgibran563]

@@1AAuto I saw a video that did it with a Sentra. It is pretty much the same, give or take a couple steps. Thanks

[@chinocisneros22]

Is the same procedure for an 07 versa?

[@1AAuto]

+Gustavo Flores The part in this video fits your application, and the install should be the same or similar. Buy this part on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@leohuerta2670]

Very good video and professional, like the details you went thru.

[@1AAuto]

Thanks for checking us out. 1aauto.com +leo huerta

[@jasonbeaulieu4979]

they literally skipped the hardest part. video sucked

[@AlexSilva-zj6sr]

Nice and clean

[@justinlewis2519]

Where to get clock spring? And how much?

[@1AAuto]

+Justin Lewis Thank you for watching! We do not carry the replacement clock spring at this time, so we are unable to get you a price.

[@creaser28]

Whats the part number for that part

[@ZOwater]

Thank you so much for the video!

[@1AAuto]

+Danielle Damm Thanks for checking us out! 1AAuto.com

[@jaybeezus5393]

My 2012 Nissan Versa had a third retaining spring clip at the bottom of the wheel; if your vehicle does too, know there is no external entry point. After unlatching the right and left airbag housing prawls from the wheel mounted retaining springs, you'll need to rotate the top of the airbag housing toward yourself while depressing the bottom. You may find it's a bit tricky, it can take a bit of precise force. Be careful though, the airbag housing can have too much momentum after clearing the retaining spring and stress the wires attached to it and the clock spring. If you're frustrated, I recommend finding a picture of the rear side of the airbag and work through how the prawl interacts with the steering wheel. I will try to upload some. An extra set of hands could make the process more nimble too: depress both spring clips simultaneously, while the other person leverages the air bag. Have patience and good luck!!

[@1AAuto]

+jay beezus Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@socorropalma3375]

saludos, podrian subir subtitumos en español.