How To Remove Door Panel for Mazda CX9 2007-2011

Quick video on how to replace a window motor.

[@williambradt616]

I just used this video to fix the wife's driver side window. Still helpful almost 7 years after it was published. Thank you!

[@bagsx5]

This was awesome. I’m a woman. Was able to do this myself in about half an hour. But only because of this video. Made it so easy!!

[@chrisfreer6329]

Really helpful!! Two suggestions: tape the window in place when you start so there's no chance of it falling down and unwinding the regulator cable when you pull the motor off, and if you remove the stereo speaker, you can put your hand in the cavity and hold the cable reel of the regulator in place when you pull the motor off and put it back on - then you don't have to be as careful putting the motor back on. This was great - thank you so much!!

[@YK-yw4jp]

One more step: if auto roll doesn't work after replacing the motor, you need to calibrate it (roll window up and keep holding for 3 extra seconds). Very useful tutorial, thanks!

[@alexasalazar3610]

+Yan Karasik Thanks for the extra tip!

[@njp1njp]

Thanks

[@nancyvelez6602]

This is true !! And take 2 at the same time

[@kawasakiwaverunning]

Thanks

[@tiantianchen2654]

Where buy this part motor

[@micahhanley4899]

Great tutorial! I needed to replace the keyless entry button on the handle, but absolutely needed the first half of your video to get the panel off without damaging anything.

[@nitinpatel3523]

Excellent step by step repair video.. thank you. I called the dealer and they wanted to charge $550. I have both Driver and Passenger side motor that needs replacing. I got the motors from Amazon and will be attempting to replace it this week. Thanks again.... if this works I can save almost $1200..

[@DrJoJoBoxer]

This saved me a ton of money fixing my 2011 CX-9 because my door handle broke off and then both window motors failed within 12 months of each other. Got all the tools he recommended and fixed everything over the course of 2 days. Extra day because I had to get window regulator from auto parts store. Stealer ship was asking for ridiculous amount of money to fix it all. Thanks brother!

[@tauhidrahman5217]

This video was a life saver! Thanks so much for taking the time to create and post this. I was able to replace my window motor with your instructions and not have to pay big money at a car shop. Couple of items I would add for any just needing to replace the window motor is to rest the door panel on a box or stool so you don't have to disconnect those three tricky electrical connections. There's plenty of space to disconnect the motor lead and get a wrench in to take out the 3 motor bolts with those wires still connected. Also, I didn't need to take out the door light piece either. Thanks again!

[@davidsparling3505]

Probably one of the BEST and CONCISE how-tos I’ve ever seen on KZbin! You have talent, sir! 😎👍

[@jeffreybates7529]

I used this video and have changed at least a dozen of these on my wifes and daughters Mazda's. A compliment to this is the video showing how to just replace the plastic gear. Once I bought two motors (they're different depending on which window), I had back up motors already repaired and did quick hot swaps. I can replace one in 15 minutes if I have all the tools organized.

[@paulbellerose1043]

To Jammin Dave....or anyone else who has the same problem! If your passenger window doesn't operate from the drivers side control....before you do anything drastic try this. I did and it worked for me! You don't even have to take the door panel off! Turn ignition to "ON". Roll down the passenger window (from the passenger side) all the way down and back up.... hold the button for 3 seconds. Repeat with the drivers side window (up, down, back up again, hold 3 seconds. Now repeat the procedure from the drivers side with BOTH buttons simultaneously! I found this procedure on another site and thought I would share.....

[@Thebuffalobrief]

This is the best video I’ve seen for this topic. No unnecessary steps like removing the speaker and wires to everything unlike other videos

[@ViolentEngineering]

I want to extend my gratitude for producing such a valuable video! I followed your instructions to repair my vehicle's window successfully. Can't go wrong saving a few hundred bucks for 30min of work!

[@Marine_0317]

This is by far the best how-to I've ever seen on KZbin! You just saved me a lot of money, Thank you. Keep up the great work!

[@rlbeditor]

Thank you thank you! I paid $33 for an aftermarket part (that’s probably better than the crappy, overpriced OEM part), and another $20 for hex wrench bits and the plastic pieces you recommended (all on Amazon, with next day delivery). I followed your video exactly, and in less than 30 minutes, voila, it worked!!! For the record, I’m the least handy car guy in the world - and this video has inspired me to replace other parts just as easily (e.g. a broken taillight). When you see how simple it really is to replace these parts, you suddenly understand what a ripoff dealers service centers are!

[@brucefranks5478]

I know this an old video, but I just want to thank you for this video. I replaced my drivers side a couple of years ago with your guidance in this video and today, the passenger side. Total cost for parts (including the tool kit and both motors) was just over $60 bucks on Amazon and total time to replace both was around an hour, if not a little less. Thanks!!

[@jundong6586]

Thanks a bunch man. With help of your video, the job became so easy. One comment: I used a small stool with back to have the panel lean on, then no need to disconnect those wires, which made my job super easy.

[@SEEKERONE1]

I did the same the second time

[@matthewnewell6109]

Dude - This was so perfect - I almost recommend people do this first before buying the motor - I opened it up and found that the connection cable was loose clicked it in and boom - window works perfect - 15 minutes max. All i had to buy were the dental tools and plastic pry tools at Harbor Freight - Saved soooo much money on this - Thanks!!

[@neenernener]

Alexa Salazar, Thank you. Very helpful. I'm doing "research" for a problem I had/still have. Had passenger window motor replaced at a Mazda dealer (2014 CX-9.) Shortly afterwards, first time I used passenger door, the handle felt off/different. Wouldn't spring back as usual. But it still worked. I called Mazda dealer & explained the issue. Was told they'd make a notation in my chart & since it was technically (at that time) still functioning, they'd take care of it at next appt. Next service appt, I reminded them about the handle/call/notes & surprise surprise NO NOTES! I explained what occurred to the brand new service dept. manager. He & a mechanic looked at it. Well, they grabbed, pulled, yanked & slammed it a few times, while telling me "There's NO WAY we broke it while replacing window motor. We didn't even touch the handle." Quoted $300 + to fix "little plastic thing inside." At this point, I was beyond pist off! Told them to STOP manhandling it before they broke something else!! My QUESTION to you, or anyone that may read this is, What do you think about what they said? I swear the door was working just fine before they fixed the window! QUESTION 2- any idea What little plastic thing might they be talking about? I've had another issues with the lock, since then. Sometimes it'll lock, other times it won't. Sometimes it will unlock, other times it won't! It's very frustrating to deal with car not working properly, but it's INFURIATING to be treated like a dumb blonde clueless girl that can be taken advantage of & sold blinker fluid! Thanks again for the informative video. I see STEP ONE: unscrew handle, so obviously the statement made by MGR. About not touching it is FALSE!

[@rommeld83]

With your instruction, I replaced both the drivers and passengers side and saved atleast $1000. Thank you! Just a tip, I actually found that I didn't have to disconnect the door panel wiring. Just gently rest the panel on the ground.

[@msk3905]

how did we live without You Tube years ago, this is exactly what I need to do and this is an excellent video! no stupid talking or trying to be funny just get's to the point...I wish that all You Tube videos were like this!

[@maryconwell7495]

My 14 year old son just installed my new motor thanks to this film!! We greatly appreciate your video because we couldn’t have done it without you! You’re awesome :) I’d pay you if we could!

[@iamg4003]

My brother!! Thank you so much. And you were correct. I did it in less than one hour! And wouldn’t you know it.... yesterday my driver side motor is going out now. But with this video helping me on the passenger side... it will be a piece of cake. And I’ll save around $500 on each one since motor only costed me $50 on Amazon!

[@santo6654]

Saved at least 600-700 bucks replacing 2 motors using this video. Even a local window repair-shop was charging me 160 per window. I ordered. 2 motors on Amazon @52/ each. Only thing I did wrong was I pushed in white piece that motor goes into. Took a bit to reattach it in place. So yeah be careful. Also door lock cables popped out, when replacing make sure cable ( collars) snap back into place or locks may not function properly. Also Found that didn’t have to undo all electrical connections. But this video still very helpful.

[@helenboland2849]

I couldn't have done it any better! Bravo! Worthy video that is not only user friendly, informative, but video and audio were outstanding quality! I look forward to more worthy DIY tips!!! I can''t thank you enough!

[@davidpiza429]

Thank you! I only payed $60 for the motor on amazon with shipping. It was easy to swapped after watching your video. The dealer wanted over $600 to install a new one.

[@marks93cobra]

VERY well done video. I am no noobie working on cars, I just hate trying to figure out where all the hidden clips and push-pins are, this video made it extremely easy to do since I could see everything ahead of time...THANKS!!

[@williamsiano2023]

I just finished the driver's side, passenger side tomorrow. Great info, thanks a million. Glad I bought extra clips, several broke while removing the door panel.

[@ragingmando5956]

These steps WORK!!! I was quoted from Safelite $599. I found both the driver and passenger side motors for $78 total on Amazon. $5.99 for the trim removal tools from Harbor Freight. Took me a total time of 45 minutes for both sides. I do not work on cars. I did it on a 2010 Mazda CX-9 Grand Touring. The only thing I didn't do was move the door handle through the panel. I found enough room to work with it still attached.

[@dmnutex]

Thank you for the clear instructions. This is the best video I found on KZbin.

[@karldkramer]

Thanks for the video. Just fixed my 2008 CX9 drivers window. I wish I had seen this before I shelled out $475 to have the passenger side done. You have a really good step by step process on how to do the repair.

[@kevingiblin6925]

Terrific video! Work was executed expertly and your video was easy and clear to follow. Thanks for taking the time to make, it you saved me a lot of money. I did it right along with you and start to finish was only 40 min. Make more videos, nice job!

[@malachilee1993]

Thank you for your demonstration. My daughter and I solved the window motor problem now our window works like new.

[@jeddbob]

Thank you so much! Excellent video. I just finished repairing my 2011 CX 9 and saved many hundreds of dollars with your help!

[@bcarter395]

You're the man!!! I got the tools you recommended, and had your video playing while I did the job. It was a breeze with your info! Thank you!!!

[@waqasansari7013]

Oh man. You are a champ. I was given a quote of 650 aud. Got the motor in 267 aud +70 aud for tools= total cost 340 and tools in balance. Changed it myself in hardly 25 mins 🤗

[@AlexDallaPalma]

You sir a world class champion !!!! - still haven't fixed it but its so easy when you know how to do it.

[@SEEKERONE1]

You are a badass i have used your video twice to replace the same motor. I was cheap and did not use OME. Damn you have saved me about 1200 bucks.

[@codyh5232]

Found this video looking good internal shots of the door. Ended up watching the whole video. well explained and informative.

[@voldsom3927]

Awesome video man! Great explanation and video quality, step-by-step procedure, and the warnings of what you don't want to do to lose that disc for the window regulator. I bet you saved a bunch of people money on swapping that motor, or even just swapping the speakers out in the doors.

[@lloydmorris359]

Appreciate the money you saved my through this video. Had to replace both front and back motors. You saved me a ton my friend.

[@reebok001]

Thanks for the great video. I installed a new window motor in my '13 CX9 in about 45 minutes and saved a ton of money. Really appreciate your work!

[@challengergary9863]

Thanks - got the job done in less than 10 minutes thanks to your video!

[@jimwatts4156]

Thank you for such a great video. Installed my new motor. It took only 15mins using your video.

[@mpaji750]

Just dropping by to thank you alex for the tutorial. I replace my wife's driver side motor and also broken switch. Very helpful and useful video. Gracis

[@dwightwhorton]

Thank you for posting this. The dealer wanted $589 and I would have to be without my car for a day or two. So that would have been more on the rental. I did the work in 30 min. I did replace the motor I just replaced the gear inside the motor. $15 . Thank again good video.

[@dwightwhorton]

From Amazon, but it was shipped from another company.

[@TimothyFrancisco]

OMG, thank you, I ordered the motor on Amazon for $36, and I replaced it in about 30 minutes total. It was going to be $150 just for the dealer to diagnose it. It was a 10mm socket on my 2008 Mazda CX9.

[@guitarnate]

Dude! Amazing video and you saved me a ton of money! I just did both front window motors for $10!! One thing I'll add that you didn't have an issue with but I did which the Chilton manual addresses is the regulator can come unseated when push the motor back in. If this happens simply unscrew and remove the speaker and hold the regulator in place from behind the door panel while pushing the motor into place.

[@sacju6517]

Thanks for this video. I replaced the motor on my wife's 2013 CX-9. T he window needed assistance going up or down about 1/3 from top. Didn't see anything broken or cracked on the motor gear but it fixed issue.

[@craigmiller5377]

Brother! You rock! 20min fix for $65. Thanks for the awesome video.

[@nathanmuthu1883]

THANK YOU SO MUCH for this video. I was done in an hour. Be patient when you replace the motor. THis great tutorial will walk you through the steps. Good luck.

[@markgy]

You're a legend Mate! Saved me a trip to the mechanics. Cheers from Woy Woy, Australia

[@Killdoomrodar]

Thank you. This video helped me out. I watched one before this and I could not understand the guy so this was awesome. Thanks

[@madmaxmedia]

Great video, warning about fitting the white barrel carefully! One tip- after sliding out the door pull, I just gently let the door assembly hang loose without removing the electrical plugs- there’s more than enough room to replace the regulator motor.

[@rich9792]

Thank you thank you thank you! Excellent instructions! Followed exactly. Had to change both doors. Driver side took 30 minutes because I wanted to go really slow. Passenger side 10 minutes from removing door latch cover to popping last platic grommet into place for door panel.

[@madmaxmedia]

This is such a good tutorial video- I’ve done my Jeep and now can do my Mazda- Thank You!!!!

[@loridercks3261]

This video was awesome. Had this motor replaced in less than a half an hour and for under $40!

[@USN_Fleet_DEI]

Thank you for posting the video, spot on instructions that allowed me to do my own job, I appreciate you taking the time to provide your expertise.

[@adel5959445]

Thank you... my window motor is working but the gear inside it is damaged. your video will help me doing the job and save some money.

[@murd777]

Thanks for your help! It took me 15 minutes to replace the windows motor. One thing.. I didn't need to disconnect the wires, except the motor. I think is easier that way.. You just need to be careful not to damage te wires and connectors. Thanks again!

[@tomtickerhoof504]

Perfect. Thank-you for the detailed instructions. Saved lots of bucks.

[@MegaHabijabi]

Thank you so much for showing the details of this work. You are a Pro. God Bless

[@paulkelleher8303]

Yo, thanks! Saved me a bundle . Only hard part was the spool fell into the door well. Helps to move the window a bit down to fit the motor in the spool. Thanks

[@alexcalder4372]

This helped immensely with our 2010! Thank you so much! Installation took less than 30 minutes and the window is like new. Thank you!

[@alanmiller2770]

Great video! I did pay over $600. to have this done at a Mazda dealership. I should have watched this first.

[@carlospolanco1714]

gonna try this out this weekend. my 4th project. seems easy enough. thanks for the video. Massively helpful!!!

[@r3dsnapper]

Just did this today - $9.27 instead of $600.00 - awesome. One step further though. I replaced the gear inside the motor - did not have to replace the entire motor.

[@cruepprich]

Awesome video. Thanks a bunch. My daughter and I were able to replace the motor in under 30min.

[@lizaqaddourah8272]

Awesome video! Thank you so much - we followed you step by step! I loved that you outlined all the tools needed at the beginning of video. Bravo - Well done!!! Saved us tons of money!

[@scottbaker1800]

Thank you for helping me save my niece hundreds of dollars.

[@Ken-lp9qt]

Thank you for posting. This saved me some money.

[@clovismaciel7498]

I bought it on Amazon for $ 43.00, thank you, you helped me a lot.

[@kenvaughn4776]

You just saved me a ton of money!! Thanks very much!!

[@35zeta]

Thank you for this step by step vid. Very helpful and concise.

[@jcserrano97]

Thanks! Now i can fix the faulty Bose speakers that rust up after some time. Great tutorial!

[@rdave6137]

Thanks a lot. This video is very easy to follow. Unfortunately I couldn’t take out three plugs, so I supported panel on the stand and replaced motor. Wasn’t hard. Again thanks.

[@Sundaydinner.withthefamily]

Thanks for posting, have to do this on my wife's cx9 this weekend

[@matthewdonohoe160]

Thanks a million, made replacing the window motor in my CX-9 super easy!

[@cresramirez5359]

Saved me $400! Thanks for posting the video!

[@rolandvz71able]

Great vid! Now I can move forward in replacing the window switch assembly....nice work!

[@robsea8088]

Excellent video, that is the word to explain this helpfull video. Many Thanks. Or the speaker that I wish to replace soon. The camara guy did a great job, was cool all the way to get the better pictures. Best Regards!!!!!

[@teocabacungan6384]

Awesome demo! You made it look too easy plus very well explained! Thanks!

[@kawasakiwaverunning]

Thanks to your step by step video, I have the cx9 2014, now I am ready if it happen, save $600 yea!

[@user-nn8lg9qu7y]

Thank you! Thank you! So happy I found your video because I did it myself and in like 1/2 an hour. Super easy instructions! You rock

[@cainsvids3088]

Great! Finished in 10 minutes. Thank you.

[@sabyx5]

Thank you, thank you, thank you!!!!!! Just replaced both R and L motors. You just saved me 1200$ God Bless..

[@rahimakbar]

Thank you so much! This was very helpful! The whole video was step by step, which really helped.

[@pachomolina1966]

Thank you for taking the time to record this fix. Great job!!

[@jaymartin5752]

Thanks for the post! It was a great help and a money saver. The only thing is that the auto feature does not work.

[@tacofino]

Great Video! Replaced motor in less than 20 min.

[@Bearded.Wonder]

Brilliant! Thanks for taking the mystery out of the project. Everything worked just as you described.

[@leoMichigan]

Awesome video! Thank you so much for taking the time to put this tutorial together. Very helpful.

[@successchaserz]

I appreciate this. Saved myself a bunch of money.

[@theroundman]

Thank you for making this video! You saved me a lot of time and money.

[@vtecaccord96]

Looks like I have to do this over the weekend. Thanks for the video!

[@vinyl_soul]

Thank you, for your video.... i was able to fix my window and save hundreds of dollars.

[@barry.anderberg]

Just finished this job! Thanks for your video!

[@rubenrios1516]

Great video, step by step, thank you 💯

[@jewels454]

Than you, I appreciate you taking the time to upload this.

[@ANTiSOBERftk]

Round of applause 👏. Gladly appericate it, thanks 👍.