In today's video i show how to remove flywheel bolts without a impact. This method works best with the engine in the car but still works without the engine installed.
Пікірлер: 113
@daverush823 жыл бұрын
You just cost me a $20 in the swear jar, but saved me my sanity. Worth it.
@TexasHondaChannel3 жыл бұрын
Glad to hear! :D
@joe2thesequel3 жыл бұрын
Worked in 5 minutes with a 30", 1/2 drive breaker bar. They were tight but they came right out. Thanks so much!
@Coatchawa3 жыл бұрын
Good idea, good video, straight to the point. Thank you
@AdventureOutintheWildreness5 жыл бұрын
Awesome idea, I normally use a punch and stick it in the clutch bolt hole to catch the back of the block.
@TexasHondaChannel5 жыл бұрын
I have done that as well. I damaged threads once doing that though so i tried finding another way and this works pretty good but i always say do whatever works!
@AdventureOutintheWildreness5 жыл бұрын
@@TexasHondaChannel that hasn't happen yet, but good to know. I'll do itr your way from now on. Or make a tool for it.
@TexasHondaChannel5 жыл бұрын
Tony Ventura That would actually be a very good idea!
@FriendM20103 жыл бұрын
Well done! I had done this before, forgot about method, was searching web for a flywheel lock and found your video 👍. We older folk, need a reminder 👍
@adamjoefellows2 жыл бұрын
I freaking love you !! lol this was so easy and it held like a champ never fell off or damaged anything . it just stayed how you showed how to set it up and reversed the direct to put the flywheel back on and torque it. Seriously don't know what I would have done without this video. Can't speak highly enough about how great this trick was. Seriously life saver ! Thank you !!!
@CesarsCarCorner5 жыл бұрын
I was trying to figure out a method to remove my flywheel bolts! Thanks for the tip!
@TexasHondaChannel5 жыл бұрын
Cesar Hernandez no problem!
@taxtic88115 ай бұрын
Absolute amazing idea!! Worked so good! Been going at these flywheel bolts for an hour and saw this and got in a few seconds!! Appreciate it
@danman2070 Жыл бұрын
Thanks mate! I've struggled with this for 3 cars now. About to do my 4th. You just saved me.
@gentry64513 жыл бұрын
Thank you so much! This worked flawlessly for me, and I saved so much not having to get an impact. Very clever workaround.
@robwright9164 жыл бұрын
This video helped me out. Had no trouble getting the bolts out fast with this method and didn't have to use an impact.
@thejustmechannel32984 жыл бұрын
Woohoo just Google searched for this stuff an bam you got first vid post!!!! Hell yeah Love peace and axle grease brother! Congrats again on the move too
@AaronAverett4 жыл бұрын
Thanks for posting this; it worked great for me! I had the engine out of the car, with the oil pan sitting on the floor and the top of it supported by my cherry picker. I found the best way to do this was jam the flywheel with the wrench like you showed, grab the valve cover with my right hand, the intake manifold with my left hand, and then use my left foot on the end of the breaker bar to loosen the bolts. It also worked on the crank bolt, just like you said.
@kylnan3 жыл бұрын
I'd be careful because the flywheel bolts are really short so you're more prone to strip them
@brenthunt62664 жыл бұрын
Thanks for that tip, will definitely be using it! Oh and that last part with the "hey" gave me chills!!! 👻😱
@dmcresins6 ай бұрын
Thank you, Sir! I was replacing the clutch & flywheel on my accord typeS , in the driveway on axle stands with basic tools. Nightmare job, removing the subframe, etc. Finally got to this part. Was losing the plot and about to reach for the angle grinder... 😅 Nice one 👍
@jonathanharris4384Ай бұрын
Thanks, worked a treat! (except for the bolt which broke... But I have a set of broken bolt extractors for that). Just one suggestion - I used a combination wrench, that way the ring end was held in place so the wrench couldn't fall out of place.
@paulv14983 жыл бұрын
Sweet, I’m changing my clutch and you can use this method with a double box end wrench to tighten them up also with your torque wrench! I thought I may need to buy a flywheel holder but this will do the trick.
@ruben-tw5zcАй бұрын
Thank you for this video it seems pretty straight foward and doable. I will for sure try it I have been working on my car's crank pulley and it has been hell ! thank you i had not thought about trying your way. i hope it works !!
@angelisone4 жыл бұрын
2000 Civic Flywheel, you failed to say the socket (1:25) sizes, at 12 point or what? Then the torque?
@kriswyche3 жыл бұрын
You seem like the type of guy to grind out a car in any location under any circumstances lol. Cool video and good tips 👍🏽
@Horses_and_Horsepower4 ай бұрын
Thank you!!! You saved me many hours of cussing and frustration
@tw0million4 жыл бұрын
just used this trick on my BMW e30. you saved me a lot of grief. thanks!
@Arx-qy1qc4 жыл бұрын
Good idea never woulda thought of anything like this. I don't have an impact so thought I was stuck here. Ill try this tomorrow.
@davidgoodwin6582 ай бұрын
I was going to try and jam a screwdriver between the engine dowel and the starter teeth on my flywheel. It would require 2 people, but this method looks easier.
@danilopesuelo5 ай бұрын
Thanks its worked you help a lot, good job, shout out here from the Philippines
@kennybpasten3 жыл бұрын
Bro!!! I spent 5hrs fighting my engine. I will try this next!
@MotorScotti2 жыл бұрын
Awesome man, soo easy and yet I didn't get to that myself. Thank you!
@omarelbori5 жыл бұрын
Nice trick man!!! Thanks for sharing
@TexasHondaChannel5 жыл бұрын
El Bori no problem
@ocelot22342 жыл бұрын
What socket are you using ?
@thebluntedcarguy71634 жыл бұрын
Need to buy a better battery powered impact. I got one close to $300 from harbor freight, well worth it, paid for itself numerous times. First test to see if I would of kept it was at junkyard and busted loose 5 honda accord crank pulley bolts, so kept it. Had it for now about 2-3 years no issues, I just used it today to break axles,calipers, crank pulley bolt, mount, and all transmission housing bolts.
@paradise189089 ай бұрын
Made my life so muzh easier. Ur the best!!!
@josephcarrasquillo49935 жыл бұрын
🏎🏎
@abdelrahmanelsharif62262 жыл бұрын
Thanks for the tip. I tried it and it worked. I also bent the trans bolt but no big deal.
@jayc21012 жыл бұрын
What size socket did you use
@FFdextrous2 жыл бұрын
Thank you! I needed this so badly! Good told impact torque wrench couldn’t move my loctite fly wheel Bolts!!!
@jast.16134 жыл бұрын
Nice. Thanks man. Also sounds like you have a helper from the other side.
@Unknownas13372 жыл бұрын
You helped me so much man! Subbed!
@dtorres25 Жыл бұрын
thanks so much dude. your smarts saved me alot of headaches. thanks n Kudos.
@pclouw3 жыл бұрын
Damn brother man.. awesome trick.. I am in the process of building a little turbo engine and needed flywheel off.Can I torque it back up this same way? It won't hurt the gearbox mounting bolts?
@jesusadames40964 жыл бұрын
You saved my life. Thank you so much
@carlossoto80104 жыл бұрын
Just tried this 😂 bent one of my transmission bolts
@SjRippaa3 жыл бұрын
i tried this and ended up stripping all my flywheels bolts, claimed warranty on the engine and got my money back. WASNT HAVING IT
@Coatchawa3 жыл бұрын
@@SjRippaa Sounds like you had the wrong size socket on the bolts if you stripped ALL of them. I'm surprised they warrantied that
@SjRippaa3 жыл бұрын
@@Coatchawa it was a used engine. i didnt say anything. besides the motor blew up 3 days after install. i was pissed af.
@PlayForge927 ай бұрын
What size socket though
@ashleybryantruong94325 ай бұрын
Thank you! This worked awesome
@masonrichardson65813 жыл бұрын
Wow this is the best way I’ve seen
@codysmith38575 жыл бұрын
Sweet video man that will come in Handy great way to get those off
@paulringholz43159 ай бұрын
Very helpful!!! Thank you so much!!🤙🤙🤙🤙😁😁😁😁🙏🙏🙏
@joebamabeenlyin8 ай бұрын
it was so easy, thank you so much
@dancinglove4493 жыл бұрын
Simple but ingenious solution!
@njaisinghani Жыл бұрын
This is super smart. Thanks!
@Kirbygram210 ай бұрын
Worked for me thank you I was very upset
@Boscovius Жыл бұрын
That's ingenious, but the bell housing on the corvair motor I'm disassembling won't permit it. Was thinking of using some heat. Yay? Or Nay?
@subietech1.65 жыл бұрын
Pretty slick trick👍
@kellyalexander72224 жыл бұрын
What size of bolt did you put in the flywheel hole?
@MrMudEagle2 жыл бұрын
This helped me. Thank you.
@luchomatic6 ай бұрын
Thanks, it worked perfectly
@SDWYS144 ай бұрын
Thanks for the video friend!
@josephcarrasquillo49935 жыл бұрын
Lol
@drock.7132 жыл бұрын
Brilliant. Thank you!
@Burnwash2 жыл бұрын
Beautiful! Thank you!
@dancrankshaw27532 жыл бұрын
Shot bro🤜 omfl I've been struggling
@Paint0nBrush2 жыл бұрын
it was the ghost of your engine coming back to life
@samser84454 жыл бұрын
Good tips bross
@DBLo7 Жыл бұрын
great vid hopefully ill get these bolts off
@Nicabrick611 ай бұрын
Thank you so much my savior
@antonylubbe44882 жыл бұрын
Thank you so much!!
@TexasHondaChannel2 жыл бұрын
No problem 💪🏻
@llxeoxll Жыл бұрын
so easy and smart thanks
@vikrammalviya79172 жыл бұрын
Sir which side does flywheel move
@dudehooligan4453 Жыл бұрын
Dude thank you you da man!...
@dieselhead24 Жыл бұрын
Great tip.
@ajst7843 жыл бұрын
this trick works wonders
@roberttemple989914 күн бұрын
O can't get the polit out any ideas flywheel is off
@alexanderwatkins6538 Жыл бұрын
Thanks dude 🙏
@zachmazzaferri2548 Жыл бұрын
Thank you so much
@dyegsitsw95410 ай бұрын
Genius
@azmanahmad704111 ай бұрын
Thank you..
@mohssenify Жыл бұрын
I goona try this tomorrow m flywheel bots overtorked by impact gun n I've been trying get them off by wrench without success
@kylnan3 жыл бұрын
does this ruin the flywheel?
@cwen91474 жыл бұрын
Good video
@OBEYCKILLZ132 жыл бұрын
Thanks homie
@afiazizan13834 жыл бұрын
thanks you ..
@710pappy5 жыл бұрын
I ain’t afraid of no ghosts 😜
@TexasHondaChannel5 жыл бұрын
Joe’s Life we use to go ghost hunting it was fun times. I’m more scared of tweakers than ghosts. Them tweakers are like real life zombies lmfao
@renzmarkmangubat8778 Жыл бұрын
Thats great
@kylerpeddy95414 жыл бұрын
THANK U
@profeletro7222 Жыл бұрын
The problem is getting these screws out with the engine in place.
@vianmckenna8325 Жыл бұрын
Thanx Mate😂
@anti-herofishing5 күн бұрын
Life save that’s KZbin
@putera377221 күн бұрын
😮
@f3archrist Жыл бұрын
W
@1988preludee16 күн бұрын
I rounded my bolts
@eazhar4 жыл бұрын
Earthquake or Milwaukee would break the bolts free. Bauer 1/2" cordless is junk
@jeffreywestervelt26712 жыл бұрын
Just get an impact! Borrow one buy one… eff the dum shhhh
@trumpisaconfirmedcuck5840 Жыл бұрын
What about putting it back on? You need to torque the flywheel bolts....
@leninmendez25462 жыл бұрын
So what happens if the flywheel moves? I was trying to remove the bolts and the flywheel moves like 1inch