HOW TO REMOVE FRONT HEADREST ON A 2013 CHEVY VOLT

[@leoayoroa7217]

Finally so simple directions Thank you sir

[@darealsnipey47a77]

Life saver mate, worked for my 2019 Astra (GM Family) so I guess they use this same system across a lot of vehicles and no one has it mapped out as simple as you.

[@redsandro]

Thank you for filming exactly how to do it! I need to transport some things and it really helps to remove the headrest.

[@deejaycass3698]

Awesome I'm glad it helped.

[@marcindyrga2766]

Same procedure for Opel/Vauxhall Astra 2011. I wouldn't have done it without your video. Thanks so much.

[@deejaycass3698]

I know I'm waaaay late but thank you for the kind words.😊

[@garyngrace25]

You're the man for this. I made some cuts and moved the foam under the caps for easy access to the metal loops next time. I used a small drilling bit to push the loop outward.

[@deejaycass3698]

Good point for those who want to make a cut and such. Thanks for sharing.

[@kylosolo8815]

Much appreciated man my daughter bought seat covers for her 2018 cruze and i could not figure this out im use to the old press hold and left lol again much appreciated

[@Auxetic-]

Yes I needed this! Have this Chevy for nearly 6 yrs now, I finished cleaning everything except the two front headrest. Thank you!

[@deejaycass3698]

Sure thing I'm glad the video helped.

[@sboston4]

You save my bacon. I've been trying to figure this our for a couple of hours. This worked for my 2017 / 6th Gen Camaro. Thank you!!!

[@deejaycass3698]

For sure. Glad it could help. Actually didn't know it was the same procedure for most of Chevy vehicles.

[@lorenzoduran494]

Life saver!!! Worked on my 2010 buick lacrosse

[@nickg538]

Very informative and very useful. Informed me how to remove the headrest from a Buick headrest with the same setup

[@deejaycass3698]

Nick G that's Awesome! Who knew. Wonder how many more vehicles follow this same method. Glad it helped.

[@wanda01141]

Nick G I have a buick too. What years was/is yours

[@theprimevegan5410]

That head rest sucks!!! Nommater how you adjust it it won't let you put your head back. So your head it always more forward than you want it and it F's with your neck. Thank you so much!!!

[@Tamarinera23]

Totally agree. Make sure to put it in backwards, though, because you do need something to stop your head in case of an accident.

[@007Charel]

Thank you so much. Your explanation and video is just awesome. Will try this out.

[@wanda01141]

Wow I have a 2016 buick regal. I pray this works! Then I will use another vid I found to push it back to be more comfortable.

[@AndysDogHouse]

I guess God forgot that we needed 3 hands. Thanks for your trouble and sharing.👍👍🍁

[@deejaycass3698]

🤣 No problem.

[@Tamarinera23]

The second demonstration is siper useful, with the direction of push ineicated. If you're finding a lot of resistance, you're pushing in rhe wrong direction. He's right: it's easy! Note that if you are aiming to reverse the headrest so that it does not push your head forward all the time, the clips will not engage once you have turned the headrest around. So it will just be sitting in there, but I can't imagine that should cause a problem.

[@chrisvasquez2179]

You don’t need a screwdriver if you look on the other side where the pin will come out it’s called a card a pin so what he is doing is pushing it through the other side look underneath the felt you can use your finger and pull it out it’s easy

[@deejaycass3698]

Thanks for adding to the process

[@miltonjasso5843]

Thank you for your time sr, !!! 👍

[@deejaycass3698]

Absolutely

[@csuarez]

Thank you so much! It helps me a lot.

[@ruipires7954]

Just wanted to thank you for the info.Couldnt figure it out

[@mrbungledisco]

Thank you sir

[@deejaycass3698]

Sure thing!

[@brandigoesbang]

This didn’t work for me, but I’m glad it worked for so many other people. I just couldn’t get those pins to release.

[@ch4.hayabusa]

I spent half an hour trying to push the pin in... No success. Then I sat in the back seat and took a small flat head and pulled the silver ring away from the seat... Success! Probably pulling it away from the seat would have also worked.

[@deejaycass3698]

Heck however you got it I'm glad it worked!😁

[@chrishester7357]

Pulling pin out worked better for me, but you sure helped out. Thanks

[@RapperBC]

Thanks so much, bud!

[@deejaycass3698]

For sure.

[@williamholt7870]

Thank you thank you.

[@anthony11aamu]

Appreciate you brutha ☀️

[@deejaycass3698]

No problem, my pleasure.

[@luckycharm1030]

Thanks for video! New GM Yukon made great car except for this headrest remove 🤨

[@deejaycass3698]

lol indeed. SMH!

[@AIRStudio-AngelRiveros]

Your the best !

[@deejaycass3698]

Thank you for the kind words.😊

[@TheLookingOne]

Great. How do you remove the rear headrests? The same way?

[@JoeKnowTech]

Thank you for your help. I’m having trouble putting back to where it was. The pin wouldn’t latch so that it can hold the headrest. Can you help?

[@ramsesar2289]

Thanks a lot.

[@buckwilson4167]

Thanks!!

[@latashaalston2153]

Thanks for sharing

[@deejaycass3698]

For Sure

[@MaiBlessed]

Thnx so much 😍

[@mike_burley]

Thanks!

[@deejaycass3698]

No prob!

[@earlsmith3894]

Thanks!! I'm gonna use a little scotch tape or duck tape to whole that ring!

[@arenjay3278]

Sounds like if you sand the lowest edge / cut out, it will just slide in out afterwards.

[@deejaycass3698]

Good point.

[@BaronVanLunteren]

Thanks a lot Dee Jay. For my Opel Ampera-E 2020 it worked the same way. The only thing you need to check upfront: are you dealing with an active headrest (somehow connected to your safety system, for instance the vauxhall insignia, see kzbin.info/www/bejne/f2bdk3SOjKpnppo). In my case the headrest was not connected. So it was a piece of cake, once you've seen how to do it. I also attached tie-wraps to the clips, so I can remove the headrest without using any tools. And I'm going remove it a lot of times to transport my windsurf equipment.

[@MikeDee94]

W

[@michaelmurray8295]

Honestly...GM should be ashamed of themselves for this.

[@TheDreamhouse2010]

That's too much work lol