This specialty tool is cheap and will save you from breaking your plastic rivets This is the link to the local store where I bought this: brantfordsurplus.com/products... Amazon also Carries these #diyautorepair
Пікірлер: 66
@edg76365 ай бұрын
Never underestimate the value of clear and concise instructions. Thank you.
@BillOfAllTrades20165 ай бұрын
You are welcome. Thanks for the great feedback. Please like and subscribe
@blackhawks18704 ай бұрын
Oh nice the key is to put it in between that slot I had that tool and I was just putting it underneath it. Making it break. Saw your video and show you need to put it inside that gap. Thanks
@BillOfAllTrades20164 ай бұрын
No worries. I’m glad the video helped. To replace your broken ones Amazon has boxes of them for cheap if you are looking. Thanks for watching. Please like and subscribe
@Itsme-vo4fx2 ай бұрын
The battery, for a Chrysler Dodge Journey, is located inside the driver side wheel well. I broke 2 of those fasteners trying to remove the wheel well liner. Went to the Chrysler dealership to purchase replacements. Two small plastic clips cost me, with tax, just over $10.00. So, my advice is put your money towards the purchase of the tool. You will always have it for future clip replacement.
@BillOfAllTrades20162 ай бұрын
Agreed. And you can buy replacement clips on Amazon or from most hardware stores for half the cost. Thanks for sharing. Please like and subscribe
@Ham.rigs072 ай бұрын
Done this meany times before but ended up getting stoned before hand and completely forgot. Cheers dude.
@BillOfAllTrades20162 ай бұрын
All good. Thanks for watching. Please like and subscribe
@beegee227 ай бұрын
Nice and clear showing both tools. Thanks for explaining the advantage of the specialty tool even though it looks like a little more effort to snug it into the slot. It's clear why the specialty tool places less stress on the clip by not having a single pressure point.
@BillOfAllTrades20167 ай бұрын
You’re very welcome. And thanks for your feedback. I definitely try to use the cheapest or simplest tools but sometimes a specialty tool is required. I’ve also used this tool to pop many panels off the car, and also pop out some tight sensors. Very handy. Thanks for watching. Please like and subscribe
@31acruz3 ай бұрын
Nicely done, precise and to the point! good job!
@BillOfAllTrades20163 ай бұрын
Glad it was helpful! Thanks for watching. Please like and subscribe
@andrewgardner30715 ай бұрын
Great direct-to-the-point video!
@BillOfAllTrades20165 ай бұрын
Glad you enjoyed it! Thanks for watching. Please like and subscribe
@karmicselling4252 Жыл бұрын
Thanks. Those clips come in various configurations. Not all of them have a slot to help with the removal. In that instance using two screwdrivers will facilitate easier removal. A properly sized removal tool is the best way to go to protect the integrity of the clips regardless of the type of clip.
@BillOfAllTrades2016 Жыл бұрын
Yes and there are also Philips head plastic fasteners. My vehicle only has these. That’s why I only showed them. Thanks for watching. Please like and subscribe
@randykatigbak596320 күн бұрын
Thank you for this video, very clear instructions and easy to follow
@BillOfAllTrades201619 күн бұрын
Glad it was helpful! Thanks for watching. Please like and subscribe
@St3rmTig3r Жыл бұрын
Super helpful. Thank you!
@BillOfAllTrades2016 Жыл бұрын
You’re welcome. Thanks for watching. Please like and subscribe
@wylgo571310 ай бұрын
Thanks for the tips! Make more!
@BillOfAllTrades201610 ай бұрын
Always posting more content. Any specific ideas you have in mind? Thanks for watching. Please like and subscribe
@11.59TimesUp4 ай бұрын
Thanks was about to yank it out but thought there must be a correct way to remove these without damaging the rivet
@BillOfAllTrades20164 ай бұрын
I’m glad you found my video first. Thanks for watching. Please like and subscribe
@Westcoastguy9 ай бұрын
Thank you. Very helpful.
@BillOfAllTrades20169 ай бұрын
Glad it was helpful. Thanks for watching. Please like and subscribe
@halo2bullseye9222 ай бұрын
Thank you!
@BillOfAllTrades20162 ай бұрын
You're welcome! Thanks for watching. Please like and subscribe
@dougwebster495413 күн бұрын
Ez-Pzy. The exact info I needed. Thank you!
@BillOfAllTrades201613 күн бұрын
No problem! Thanks for watching. Please like and subscribe
@Rajjjjjjjjjjjjjjjj10 ай бұрын
was wondering why this tool if flat head scew does the same. now i know why. thanks for that!
@BillOfAllTrades201610 ай бұрын
You’re welcome. Thanks for watching. Please like and subscribe
@kingboarhog11 ай бұрын
That's what I figured but I felt it best to confirm before I start snapping things! Cheers.
@BillOfAllTrades201611 ай бұрын
Glad it helped. Always best to check. Thanks for watching. Please like and subscribe.
@davidobrien4209 Жыл бұрын
Great tip, thanks!
@BillOfAllTrades2016 Жыл бұрын
You’re welcome. Thanks for watching. Please like and subscribe
@verity900011 ай бұрын
Thanks a lot!
@BillOfAllTrades201611 ай бұрын
You’re welcome. Thanks for watching. Please like and subscribe
@YTRadish9 ай бұрын
Thank you
@BillOfAllTrades20169 ай бұрын
You’re welcome. Thanks for watching. Please like and subscribe
@user-pq5tt6sg1v4 ай бұрын
Best video
@BillOfAllTrades20164 ай бұрын
Awesome. Thanks for the feedback. Please like and subscribe
@bat__bat Жыл бұрын
excellent
@BillOfAllTrades2016 Жыл бұрын
Many many thanks. Glad you enjoyed. Please like and subscribe
@spartty2 жыл бұрын
I watched actually for how to put it back properly since I broke two putting them back in the wrong way. The whole video was great though.
@BillOfAllTrades20162 жыл бұрын
Thanks for watching. Glad it helped. Please like and subscribe
@utubepunk11 ай бұрын
What size rivet do I need for a .25" hole? 🤔
@BillOfAllTrades201611 ай бұрын
I sense sarcasm lol but it’s hard to tell in a comment section. Thanks for watching. Please like and subscribe
@tommak6516Ай бұрын
6 mm is .24 inches, which is very close.
@DogsSnipes Жыл бұрын
How do you remove small ones? I used a smaller flathead screwdriver but it just damages the rivet
@BillOfAllTrades2016 Жыл бұрын
Amazon has panel popper tools like this one but with a smaller opening for small rivets. Thanks for watching. Hope this helps. Please like and subscribe
@PlaidRicky1611Ай бұрын
Hmmm, you made the screwdriver look easier.
@BillOfAllTrades2016Ай бұрын
Because I got really good at using it before I bought this tool lol. Different people may prefer a different tool. Thanks for watching. Please like and subscribe
@oldhampshrieАй бұрын
How come it's not as easy on my 20 year old truck😂
@BillOfAllTrades2016Ай бұрын
These plastic clips get filled up with dirt depending on the location. 20 years of weather will make any fastener harder to remove. This video was filmed when my car was only 4 years old. Thanks for watching. Please like and subscribe
@bbrown91962 ай бұрын
It’s never that easy with a flathead, get the pry tool !
@BillOfAllTrades20162 ай бұрын
The pry tool is definitely easiest. Thanks for watching. Please like and subscribe
@pinedac200111 ай бұрын
I wreck these dam things all the time
@BillOfAllTrades201611 ай бұрын
Yes these are a nuisance. Too soft in summer. Brittle in winter. Even with the tool sometimes they won’t budge. Either way hopefully you found the video helpful or at least interesting. Please like and subscribe
@pinedac200111 ай бұрын
@BillOfAllTrades2016 I did I had 1 out of 50 come out nice lol. So I have 200 replacements coming in the mail. Gotta love Amazon
@terrynash238110 ай бұрын
There is something really cheap about car manufacturers using these things! For the money paid they could do better!
@BillOfAllTrades201610 ай бұрын
Agreed. But there is no going back now. Just gotta get the right tool and keep doing diy to prevent them from taking our hard earned money. Thanks for watching. Please like and subscribe
@terrynash23819 ай бұрын
Will do. !Thanks!@@BillOfAllTrades2016
@BillOfAllTrades20167 ай бұрын
You’re welcome.
@musicm8kr5 ай бұрын
Thank you!
@BillOfAllTrades20165 ай бұрын
You're welcome! Thanks for watching. Please like and subscribe