How to Remove Subwoofer and Amp (Avant) - Audi A4 S4 RS4 - B6 B7 - 2001-2008 - TOTAL TECHNIK

[@TotalTechnik]

Looking for tools? www.totaltechnik.com/selectstore

[@dominicrichardson5546]

I'm parting out my dad's a4 and these videos have been a godsend, short and concise but show you everything you need to know

[@dclrock132]

This goes for all the Total Technik Audi how to videos: incredibly lucid. Lessons for all other youtube presenters begin at video #1 and continue to video "x".

[@TotalTechnik]

Thank you! That is genuinely very much appreciated. Yes, we do our whole system as modular rather than include the same content at the beginning of loads of our video's. This means that we don't needto remove and refit things five times to film the same thing five times, or no need to edit the exact same thing into multiple video's, and betterfor the view as if they already know how to remove (example) their stereo, they can just view the stuff they need. Some people don't get the modular system, but thankfully those are in the minority :-) It couldn't really be much simpler. Everything is there for the viewer - just click the links to view any extra bits you need. Like, you say, proper A, B C stuff :-) Really appreciate your kind words, sothanks again! --- To help support us (for both you and others reading this) there are a few things you can do: 1) Please ensure you subscribe to our KZbin channel. 2) Please give our video's the Thumbs Up on KZbin. 3) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. 4) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to your PayPal account and select the Send Money option and send any donations to: [e-mail] Thank you for your support!

[@octane836]

These videos are very helpful guys, thanks and keep them coming!

[@TotalTechnik]

Thank you, and will do :-) Please be sure to support us - please subscribe to our KZbin channel and help spread the word!

[@GrantGallacher-b1r]

please can you tell me the technique for removing the smaller of the two plugs? many thanks.

[@naheemkhan5551]

Loving all the a4 b7 videos guys , keep them coming !!!

[@TotalTechnik]

Thank you - we will! We actually have a LOAD more B6/B7 video's to come yet. We're only getting warmed up really :-) Please support us: subscribe to our KZbin channel and spread the word!

[@naheemkhan5551]

that's wicked, al be watching and liking them all!!! #audicrew

[@TotalTechnik]

Thank you! :-)

[@quinceywaikai104]

Hi there can u tell me if 2012 Audi A4 station wagon has amp and sub?

[@sarahrosher5325]

I know this is a very old video. But Can i remove just the amplifier (grey box section on a4 standard concert stereo) without the speaker underneath and swap it like for like? Or do i still need to remove the whole unit?

[@BrickTop086]

Thanks for the great videos! Your video gave me the confidence to do this myself yesterday 👍 However, I was trying to upgrade the standard Audi amp and replace it with a Bose unit but the connector pin on the current one is too small and doesn't have a pink clip over it either. So spent all that time removing the unit only to put it back in and so i'm now running all my Bose door speakers from the Audi amp. Is this fine? Do you know if there's a way around this? Thanks :)

[@TotalTechnik]

Hey there! Yes, the main plug on the Bose unit is different to the one on the standard unit. It can be done with some DIY wiring, but not the easiest job. You can use the original amp to drive the Bose door speakers no problem. It will give an improvement in audio quality for sure, but not quite as good as coupling them with the better Bose amp :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@BrickTop086]

@@TotalTechnik Hi, ok thanks for that. I'm gonna need to get that wiring sorted and connect it up then. Will it make a drastic difference to the sound or just the bass?

[@jakedcrane8019]

Does that amplifier also power the other speakers or does the amplifier only power the subwoofer?

[@nitrorc1623]

Is the amplifier only ment for the subwoofer or the whole soundsystem?

[@Po-Slip]

Hello, in my A4 I have the standard soubd system. If I get bose speajers and the sub in the back, is the connection the same or is it different? Thanks.

[@TotalTechnik]

On the B6 or B7 Bose and Standard amp/sub connections are different. --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@ehsanzabihiseasan]

Total technik could you please tell me the location of the ground wire that goes into the amp. I need to check my connection since I have a humming/buzzing and Popping sound on start of the vehicle coming from my sounds system. Great videos the information has been great on all of your videos.

[@psy100trance]

ehsan zabihiseasan, I have the same kind of issues, annoying buzzing sound when my Xenon/lights switches on?

[@ehsanzabihiseasan]

@@psy100trance let me know if your find a solution because I haven't yet.

[@psy100trance]

@ ehsan zabihiseasan I fixed my buzzing sound issues by installing a “groundloop isolator” Between my car radio and amp. www.highlite.com/en/d1526-agi-101.html

[@ehsanzabihiseasan]

@@psy100trance psy100trance where exactly did you install the ground loop isolators ? I tried that actually, I connected in-between my RCA connections coming from the radio and going to the car. It help take the wining and buzzing down butttttt it also effected my sound quality great . Almost as if it just turned down the volume to the whole system and just masked the problem as go actually fix it, took them out and returned them. Any insight on the buzzing problem with our cars @total technik ???

[@psy100trance]

@ehsan zabihiseasan, I connected my isolators same as you did, total 4 rca plugs (front and rear) on my Kenwood DNX7230DAB, other endings to my Bose Amp in the back of my Car.

[@simmop1258]

Any chance of a video on how to remove the drivers door interior panel and window control switches? Would be great! thanks for the awesome videos 👍

[@TotalTechnik]

Hey there Yes, we've already done the vide on how to remove your door panel (door card). Check it out: kzbin.info/www/bejne/oarUo5ppaN97brM We've not filmed the switch removal yet, but we will be (it's already scheduled). But to remove the window switches you indeed need to remove your door card first. To make removal of the main switch a little easier you can unscrew the entire handle from the rear of the card (torx screws). You don't have to remove the handle, but it's a little easier if you've not done it before. The switch does just pop out (downwards), just locate the tabs and work at it. You'll get it :-)

[@simmop1258]

Great. Thanks so much!

[@TotalTechnik]

:-)

[@blunt-trauma5682]

I’ve no sound in my radio. Powers going to it. Changed the amp on back of the radio an still nothing 😫

[@miltonkeynesschoolofbarbering]

Did you find out what it was?

[@ELMO11958]

Great video´s Wanted to ask, the sub in the back sounds verry poor for my taste,, can i easily install a tube subwoofer on the connection where the current sub is placed? (real noob when it comes to this) Cheers

[@TotalTechnik]

Hey there! Thank you! Yes, you can retro fit most things into these provided you get the wiring correct. Be sure to check on size, possible mounting position etc before getting stuck in, and check the power for the factory and aftermarket units etc. If you matahc everything up correctly you should be fine :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Please ensure you subscribe to our KZbin channel. 2) Please give our video's the Thumbs Up on KZbin. 3) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. 4) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to your PayPal account and select the Send Money option and send any donations to: [e-mail] Thank you for your support!

[@thek4232]

Do you guys know exactly the rms and impedance on this amp? I'm looking to do same thing and can't find info anywhere on it. Cheers!

[@carlosvalentin139]

Do you have a video removing the dashboard speaker?

[@TotalTechnik]

Not currently, but it's on the list actually! So one for the future!! :-) --- To help support us (for both you and others reading this) there are a few things you can do: 1) Please ensure you subscribe to our KZbin channel. 2) Please give our video's the Thumbs Up on KZbin. 3) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. 4) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to your PayPal account and select the Send Money option and send any donations to: [e-mail] Thank you for your support!

[@thisguy3031]

Any chance of removing sub and amp of a4 b6 sedan pls?

[@TotalTechnik]

Hey there! Yes, we have done that video already. Take a look: kzbin.info/www/bejne/eKekp4GwpKuhf9E Be sure to support us: Please subscribe to our KZbin channel and spread the word!

[@Bromco243]

When I remove my sub and amp from my old car about to put them into my new car in my old car my radio stopped working once I unhooked the amp do you know how to fix that

[@TotalTechnik]

That's an odd one. Have you checked the fuse? Is the radio (head unit) completely dead?

[@heimartiivel299]

yeah but how to remove the floor and side panels first ?

[@TotalTechnik]

Hey there... As explained in the video, and shown also on the subtitle, there is a link below the video on how to remove the side panels :-)

[@heimartiivel299]

tnx found the link.

[@TotalTechnik]

Ok, cool :-)

[@Sam-vt3tl]

do you guys have an actual b6 tailgate removal video? cant seem to find one on youtube

[@jackprice8252]

The sub on my audi is on the ceiling

[@TotalTechnik]

The ceiling of the boot/trunk? If so, must be a Saloon (Sedan) rather than Avant? --- To help support us (for both you and others reading this) there are a few things you can do: 1) Donations both needed and welcome! We cannot operate Total Technik without the support of people like you! You can donate by PayPal - just go to www.paypal.me/totaltechnik 2) Please ensure you subscribe to our KZbin channel. 3) Please give our video's the Thumbs Up on KZbin. 4) Please help spread the word, the more people who know about us the better! Add links to our video's in forums, let people know about us. Thank you for your support!

[@oakkblackbird]

All the thumb downs are wankers who don't own Audis...