How to Remove the Factory Front Bumper on a 2015 Ford F-150

Shop Now: www.realtruck....
Stay Informed and Sign Up:
www.realtruck.c...
Subscribe to our Channel: / realtruck
Facebook: / realtruck
Instragram: / realtruck
Pinterest: / realtruck
Twitter: / realtruck
Snapchat: Follow us at: RealTruck.com
Free shipping for orders over $100!

[@Realtruck]

Shop our large selection of bumpers for you pickup truck! bit.ly/2AkWWpQ

[@aleksemerikov3278]

under the filler panel theres a huge block that doesnt let me have access to the 13mm bolts. Please Help ASAP!

[@allenmontgomery6804]

IAlek Semerikov was a time to

[@miked5838]

Crazy, turned a 20 minute job into a 1 hr job. Remove front plastic cover then you have access to 2 21mm main bolts on each side and you need to remove the lower 21mm on back, disconnect fog light and harness then remove bumper. That simple.

[@iAmRageQuitting]

Thanks. My job pays piece work and this comment saved me 2 hours prep time

[@nextleveloutdoors9988]

@@iAmRageQuitting huh

[@nameless-og]

I was asking myself this question the whole time, kept waiting to see the critical part I missed that would require all this... the grill was the real reason I was here though, so I can't be too annoyed 😆 But I am thinking I will just drop the bumper after seeing all the clips etc (I just need to swap out that harness)

[@Shadow__Commander]

I’m angry I didn’t see this comment sooner

[@cooperlawrence4885]

Hey king. You dropped your crown 👑

[@VladoooThe]

Im pretty sure you can pull the center plastic piece off and access the bolts for the bumper. No need to remove grille, or all those trim pieces.

[@jordanozman8360]

Yes this is true.

[@itsdaprocess1579]

you still need to reach the wire harness

[@miikaeatsbagels7320]

@@itsdaprocess1579 that's for the fog lights right?

[@jamesmanson2152]

Yeah, I installed a grill guard without removing the grill. Don’t understand why he did that.

[@jonathanbaldwin6335]

I agree he did alot of work for no reason..

[@davidtexas9009]

Thanks for filming every step of the process. I just needed to know what to do to remove the grill completely. Thanks again.

[@Bladerunner4924764]

I'm just here for the grill removal. Lightly hit a deer the other morning but it still cracked the frame of the grill and knocked down some of the louvers. Now I just need to order me a new one. Thanks for the tutorial.

[@Barrskie101]

Thanks for the video! I spent about 15mins watching it and writing everything down step by step on paper. Paper holding lead has a better memory than my brain lol thanks again! Very good video with the proper steps in grille and bumper removal!

[@cessealbeach]

You guys forgot to pull the engine

[@TheMattfranz]

Bro you had me cracking up.

[@maxkiller135]

This definitely is the harder way to do it... all you have to do is remove the middle plastic piece on the bumper and you can access the bolts to take it off. I already did a bumper swap and that's all I did.... i was just here to figure out how to remove the grill

[@missionsofalphainc]

I agree with you maxkiller 135 your way is much simplier as that's the way I switched my bumper out.

[@aleksemerikov3278]

I took off those bolts and it wouldnt come off. thats why you have to take the grille out

[@gabeenterprises3537]

was yours a sport model also??

[@bradsmith1177]

Thanks for the tip! My only question (bumper will be here tomorrow) what about the electrical wiring?

[@hudsonkiyonaga]

Guys,he obviously just doesn't want to get dirty, he's no peasant that lays on the ground.

[@justinluttrell1769]

If I ever find the guy that decided a plastic grille needed 8 million fasteners to stay on....

[@jonprue]

LOL took the words out of my mouth

[@morlongilbert6513]

Thanks Man! Nuff respect, you were spot on, very helpful!

[@AlamoCityEats]

You are the man. It took me about four hours but I got it done. Thank you

[@dgilly716]

Hey man..love the video.very detailed and you actually take the time to go thru each step.i need to change my emblem on my 16 f150..do you know if the process is the same for 15 vs the 2016?

[@keif_mn]

Thank you! This helped me out a lot. I needed to replace the upper valence and ended up taking off the whole bumper just to get to the bolts.

[@JonathanAlvarado-zk2nh]

Why? There's 6 21mm bolts that you take off and it comes off

[@NerveRushh]

To remove the bumper it literally takes 6 bolts. Just remove the plastic. Don’t have to touch the grill

[@dutchynehtam]

Can you just pull the bumper by popping out the plastic pieces on the front and it’s 6 main bolts? Then it’s unplugging the harness for the fogs?

[@wes1424]

Who told you that you have to take the grille and all the other parts off, because you don't need to. I have a 16 and all you need to take off is the bumper grille to access the 2 outer nuts and 1 on the back. Disconnect fogs if you have them and 3 plastic push pins on top of bumper.

[@mr.habakkuk830]

Thank you for this video; led me in the right direction to replace my horn on my 2015 F150 XLT.

[@ronaldthomas5966]

Need to know how to reset the computer to get the engine to start can't change gears got no lights except for on the dash

[@alvarodavalos21]

Can you make video to remove the front bumper on 2018 f150

[@jesusrobledo5853]

You mentioned the filler panel, Is that the only name for it? And Where can I buy one?

[@jordanpavlic383]

how do I get that grill

[@erikgutierrez4245]

What’s the name of that grill?

[@koryjones3290]

Anyone know what kind of tires are on this truck?

[@G3ToffaM3]

Crazy u took the bumper off the bracket then the bracket off the truck thats Hella backwards. I've swapped these several times all u need to do is remove the plastic covers and bam it's right there

[@richarddennis2794]

Did you cut the outer crash bars off to get clearance for the larger tires ? They look a little shorter then normal ?

[@Realtruck]

Yes, we did that during the lift kit installation. Almost every after market bumper that we've seen for the F-150 requires removal of the crash bars.

[@thealmightytuna3239]

You can unbolt them once you remove the front bumper. No need to cut.

[@HarryTheKingPin]

Can't you just unplug everything and take off like the last 4 bolts facing forward?

[@jameshubisz]

Have to do a horn replacement and this video shows just how to get to it

[@huynguyen-gt5um]

Good job.

[@JuanGuerra92]

Would This Be The Same Process For A 2016 F-150?

[@Realtruck]

Hey J_Diesel, we really can't say for sure, we'd recommend looking into it with Ford as we don't specialize in removal of all factory parts unless we are doing a build on that specific vehicle. Likely-hood is that it is similar!

[@PlatinumVenturesLLC]

First question you ask your self would be does my vehicle look identical? If you answered yes to this then the answer your looking for that you can answer yourself threw the process of common sense is yes!

[@kkkalvarez5137]

Can this bumper be put on a 2010 f150?

[@codibranch4715]

will a 2018-19 nose swap cleanly onto a 2015-17 bodystyle?

[@nicnac126]

Codi Branch I don’t think cleanly but I bet it’s possible

[@justinowen1482]

Guy is getting paid by the hour, manual socket wrench haha.center plastic pops off and two bolts on each side done

[@robdonell9915]

What’s the name of the push-pin removal tool ?

[@brettmullholand3924]

If you google push pin removal tool a few will come up. I got a couple options will come up. I have the pittsburg panel/trim removal 6 pc set. Works pretty well and is only $19

[@johncatania7337]

Any issue with air bags going off when removing the bumper??

[@Realtruck]

We did not have an issue with the air bags on this factory removal, and typically you would not see an issue with the air bags deploying from removing the bumper.

[@PlatinumVenturesLLC]

John the crash sensors for the front are not located on the bumper. So therefore no to your question. If airbags go off when you do this then I would re-evaluate your life.

[@JSJneo]

That is the reason you remove the negative terminal from the battery to remove a bumper from the vehicle. Why else would you?

[@ronaldthomas5966]

Hook the battery backup and can't get it to start no power

[@dgilly716]

If anyone on here has changed out the front oval in grill on 16 f150 and know a easy way..please help.thanks!

[@NerveRushh]

dgilly716 you have to remove the grill to take it off

[@390fe390]

Sure miss when the grill opened with the hood like the 04-14s did.

[@jameshubisz]

That would have saved me a ton of time changing out the horn in my '15

[@Mr.t7O7]

Can I change the front face of 2003 to 2008 Expedition

[@Fkidd702]

Fucken hate these trucks. Gotta take apart the entire front end to replace bulbs too

[@erso3302]

PITA. Never mind.

[@chrisdaniel5004]

There is an easier way to remove the front bumper. No need to go through all of this, then again what do you expect from an amateur doing the video !

[@MDrumm03]

Chris Daniel - Can’t expect much when they guy is wearing rubber gloves working on an almost new truck lol