Follow Classic Gbody Garage for the latest project updates! Thanks everyone! Subscribe: kzbin.info FaceBook: facebook.com/groups/classicgbodygarage/ Instagram: instagram.com/classicgbodygarage/
@nocanigdown6 жыл бұрын
Classic G-Body Garage How to get power to heater blower
@jesusalvarez44355 жыл бұрын
Classi G-Body Garage hey bro do you have to jack the car up to remove the front clip?
@turvonc28 күн бұрын
Thank you
@LuisGonzalez-ii1ix7 жыл бұрын
Awesome! For G-Body Gear heads. I have an 84 El Camino restore project. I wanna thank you for all the time you save us Gear heads.
@YODAMAN53 жыл бұрын
HOW ABOUT SAME THING ON 1981 OLDS 88 REGENCEY, GOOD JOB.
@rickvelez64922 жыл бұрын
Do you have video to reinstall fender
@ClassicGBodyGarage2 жыл бұрын
Do not but its just the reverse of removing the fender. Just make sure you have the proper shims to gap the it correctly.
@bnlbrizzle2 жыл бұрын
Can u PLEASE make a video about installing the chrome back onto a Buick Regal? The chrome that goes onto the lower door, fender, and quarter panel. I had mine painted and I have all new plastic clips for my chrome but I dont want to screw up my paint putting it on. I didnt take it off so I'm not sure how it goes back on.
@ClassicGBodyGarage2 жыл бұрын
I would join Classic Gbody Garage on Facebook and ask there. Might have some people that can show you how it goes because I don't have a Regal that has any of its chrome removed.
@tylerhall25442 жыл бұрын
I'm trying to find out to remove rear fender
@ClassicGBodyGarage Жыл бұрын
Welded on.
@bigstud98 Жыл бұрын
U did great explaining!!
@ClassicGBodyGarage Жыл бұрын
Thank you!
@kevindunson8946 Жыл бұрын
can you show without taking the plastic inner
@ClassicGBodyGarage Жыл бұрын
The plastic inner well comes with it. There is no way it stays in the car cuz its bolded to the fender.
@lynnepearce13363 ай бұрын
Hi, is this similar to 79 Cadillac DeVille? Thanks
@thedriver028 жыл бұрын
excellent how to!
@ClassicGBodyGarage8 жыл бұрын
Thanks!
@charlesweimer46816 ай бұрын
how do u Install power antenna?
@ClassicGBodyGarage5 ай бұрын
Remove the inner well.
@DocterGordon7 жыл бұрын
so glad I found this channel, thanks for all your videos dude.
@kylecobb69644 жыл бұрын
Really appreciate the work you do keep up the good work
@ClassicGBodyGarage4 жыл бұрын
Much appreciated
@kendalemcafee13064 жыл бұрын
How do you remove and install the chrome trim that's around the bottom of the car
@ClassicGBodyGarage4 жыл бұрын
Clips and screws.
@kendalemcafee13064 жыл бұрын
@@ClassicGBodyGarage first let me say thank you in advance you rock bro keep doing your thing I'm a big supporter and do you have a video or a how to anywhere
@khrisschools83405 жыл бұрын
Great job on this how to video I’m going to attempt my fender in a couple of days !
@ClassicGBodyGarage5 жыл бұрын
Awesome!
@epicawesomezebra8 жыл бұрын
and another walk around of ur garage would be sweet !
@ClassicGBodyGarage8 жыл бұрын
I may do a video on that.
@frederickbrown70024 жыл бұрын
Do you have an euro header panel for a cutlass
@ClassicGBodyGarage4 жыл бұрын
Do not
@manueljohnson63013 ай бұрын
Braces
@Steveeoaktree418 жыл бұрын
Thanks again Brian. I reckon that will make it much easier to do my door hinge rebuild with the fender out of the way... Can't wait to see the Moon roof Cutlass finished!
@xxbigboy559xx35 жыл бұрын
I have an 83 Buick regal 4.1 I'm not getting any spark to the plugs replaced wires spark plugs and ignition coil
@ClassicGBodyGarage5 жыл бұрын
Check the pick up module. Check power going to the cap, its the large pink wire.
@epicawesomezebra8 жыл бұрын
can u possibly do a how to install bumper filler in the future?
@ClassicGBodyGarage8 жыл бұрын
For what vehicle? Check out my header panel removal because I remove the bumper cover and that may help you out.
@joelstapleton28027 жыл бұрын
Thanks from a fellow G body guy. Been looking around for how to's since I am starting to take all the good parts off my 87 Montecarlo. Sadly an SS taken off the streets permanently by rust but with every intention of saving every part I can for use on another or someone who needs one of those parts.
@joedirt70917 жыл бұрын
Joel Stapleton Which parts of your 87 monte carlo are rusty?
@edgardelacruz1567 жыл бұрын
Hey thanks for all the videos , very helpful .
@jonsworld53078 жыл бұрын
I love the how to videos keep them coming bub
@ClassicGBodyGarage8 жыл бұрын
I plan to. Thanks for watching.
@djhaloeight8 жыл бұрын
Nice video. Glad you got how-to's like this posted, will come in handy when I get around to tearing apart my '88 Cutlass Supreme Classic for paint and restoration.
@ClassicGBodyGarage8 жыл бұрын
Thanks. Glad they will help you out.
@fooledman6 жыл бұрын
Had to replace the whole front clip for my 87 some years back. Still need a passenger side headlight bezel and bumper mounted turn signal.
@ClassicGBodyGarage6 жыл бұрын
I have those parts. email me classicgbodygarage@gmail.com Thanks for watching!
@MrChops4423 жыл бұрын
Can you please make a video with instructions on how to remove the passenger side inner fender well on a G Body cutlass?
@ClassicGBodyGarage3 жыл бұрын
Unbolt it and pull it out with the wheel removed. There are a lot of bolts tho so you cant miss any.
@jonathancastelan22045 жыл бұрын
Any videos of how to remove/replace doors ?
@ClassicGBodyGarage5 жыл бұрын
Nothing on that but there will be
@dandrecoleman79765 жыл бұрын
Do I need to take that off to replace the antana?
@ClassicGBodyGarage5 жыл бұрын
Remove the inner well
@seventhirty73082 жыл бұрын
do you need to remove the header panel in order to remove the fender?
@ClassicGBodyGarage2 жыл бұрын
Yes
@longliveloaf18795 жыл бұрын
How do you remove a quarter panel though nobody has a video on it
@ClassicGBodyGarage5 жыл бұрын
Cut it off. They don't unbolt.
@longliveloaf18795 жыл бұрын
Classic G-Body Garage I did some more research and you just have to unbolt the entire body
@longliveloaf18795 жыл бұрын
Classic G-Body Garage Thanks for your time
@22Dropinthebucket8 жыл бұрын
Thankyou @Levi
@Lm701 Жыл бұрын
I have a 1995 buick century. An A-Body I think. Can't find anything on fender removal for it. How similar would it be to this?
@ClassicGBodyGarage Жыл бұрын
I have never worked on one.
@diamondscloudznizcream98397 жыл бұрын
Thanks for responding, can you do a video on motorremoval
@ClassicGBodyGarage7 жыл бұрын
Yep I will this summer.
@gbapexoctanejr16264 жыл бұрын
Hey boss suggestion can you put back on the driver side g body door for thee 84 Oldsmobile cutlass supreme
@ClassicGBodyGarage4 жыл бұрын
Use a floor jack with a long board and 2 people. Bolt it up.
@slickrickjones4 жыл бұрын
71 Nova. Took fenders off to replace inner fenders. FOR THE LIFE OF ME, I can not get them back on!! F**K my life!
@ericchavez60536 жыл бұрын
Thank you so much! Helped heaps! Do you have a video for removing the A frame?
@ClassicGBodyGarage6 жыл бұрын
No frame work yet....Thanks for watching
@zxBiiOHaZaRDxz8 жыл бұрын
Fantastic video Brian. wish this was up a month ago before I went to take mine off to remove the AC box in my '78 Lemans. Ended up creasing the fender with the door extremely badly when I fastened it back on and opened the door. Now I can't get my door open and need to find someone with a spoon. Also neglected the shims and let them fall everywhere so it's a big mess.
@ClassicGBodyGarage8 жыл бұрын
That sucks. Hope you get things straightened back out.
@deezsquuezeorg4 жыл бұрын
What happens if you lose your shims? How do you get it back to perfect?
@ClassicGBodyGarage4 жыл бұрын
You buy new shims because they are needed to take up the slack.
@tristinhample6 жыл бұрын
Do a how to remove a rear end I have a 1987 Grand Prix and will be doing it soon
@ClassicGBodyGarage6 жыл бұрын
4 bolts on the trailing arms, 4 bolts that hold the drive shaft loops, ebrake cables and brake line.
@savagefire95547 жыл бұрын
cool any tips on replacing the floor pan
@tyguy89276 жыл бұрын
Hey have you guys done a video regarding replacing the power antenna motor? If not could you?? Much thanks in advance!
@ClassicGBodyGarage6 жыл бұрын
I plan to make one this year.
@hapirish29065 жыл бұрын
Any way you can show how the heater control valve vacuum line should be hooked up? Trying to get my heat to work on my 87 Olds 442. Thanks
@ClassicGBodyGarage5 жыл бұрын
Yep i will do a video on this. Common question.
@84sheepdog568 жыл бұрын
Hello, would you be willing to talk more about the 350 with an olds crank that makes 440ci.
@ClassicGBodyGarage8 жыл бұрын
I can do a video on this yes.
@84sheepdog568 жыл бұрын
thanks, it would be cool to get part numbers,specs, where you might find a 350 DX, thanks a ton.
@shreveportfinest31108 жыл бұрын
how to remove finder without finder well
@bighommiesam87884 жыл бұрын
How do I get to the 5 bolts in the door well
@keemmadeit94126 жыл бұрын
I have a 84 Grand Prix can you make a video on how to remove the power antenna .thanks
@ClassicGBodyGarage6 жыл бұрын
You have to remove the inner well. It then bolts to the inside of the fender.
@diamondscloudznizcream98397 жыл бұрын
steering wheel removal for ignition cylinder?
@ClassicGBodyGarage7 жыл бұрын
I need to do a video on that.
@viclial608 жыл бұрын
Do You Have a video to remove/install a power antenna on a 87 olds 442???
@ClassicGBodyGarage8 жыл бұрын
I don't but you must remove the inner fender well to gain access.
@smokebeast7 жыл бұрын
Thanks so much for the help! I'm replacing the vacuum hoses on my '87 Turbo Regal, assuming I have to remove the fender to reach the vacuum lines that go back for the HVAC?
@ClassicGBodyGarage7 жыл бұрын
Yep they run behind the fender under the AC box.
@anthonycummings72205 жыл бұрын
how do you remove the whole front end
@ClassicGBodyGarage5 жыл бұрын
Remove all fender bolts on the back side near door and windshield, remove inner well bolt behind the front tire, remove each core support body mount bolts, remove wire harness, remove AC condensor, remove radiator, remove hood cable, remove any hoes attached to components on inner wells.
@oreotcat7 жыл бұрын
Hey Brian! Do you have a video showing how to replace the power antenna? I have an 87 Cutlass Salon and I brought it to the dealer and they like wanted to tear my whole car apart. I've found instructions that say how to do it but a video would be helpful. Thank you!
@markgeary15916 жыл бұрын
How do you line up the doors
@ClassicGBodyGarage6 жыл бұрын
From the hinges. They slide. Thanks for watching!
@kingrobc12007 жыл бұрын
I have a 1980 cutlass supreme and it got hit on the driver side now I know I can replace the door but the body is damaged as well how do I repair that
@isaiasduran16 жыл бұрын
How I can replace the antenna from 1984 olds cutlas supreme?
@ClassicGBodyGarage6 жыл бұрын
Remove the passenger side inner well and its bolted to the inside of the fender
@davidlehman88097 жыл бұрын
purchased 85 el camino roller no motor, trans, or inner fenders, and donot see where the front struts are located
@rcairforceone8 жыл бұрын
Thanks for the guide. Working on a 81 Cutlass Supreme with 36k original miles. I want to put the 'euro' header panel on it. Got any extra laying around??
@ClassicGBodyGarage8 жыл бұрын
I sold all of my Euro's
@qmays346 жыл бұрын
If I remove the heater box how can I still have heat in my car could you please explain that or show me how to do that
@ClassicGBodyGarage6 жыл бұрын
You need a NON AC box that has heat only. Non AC optioned cars.
@qmays346 жыл бұрын
Classic G-Body Garage where do I get that
@ClassicGBodyGarage6 жыл бұрын
Hunt one down on ebay or through the Classic Gbody Garage Facebook group. It's not an easy swap.
@SalemMillion8 жыл бұрын
You keep mentioning 78-88 G body cars and my Chevy Caprice is 89, Would your videos still help me with my 1989 ?
@ClassicGBodyGarage8 жыл бұрын
A Caprice is a B-Body and there are many differences. The fender on a B-Body might have similar bolting points.
@jessebogard4808 жыл бұрын
you still had a Hurst Olds black and gold and as for sale
@ClassicGBodyGarage8 жыл бұрын
That was a long time ago.
@marzgtp8 жыл бұрын
hay brian, I need the engine harness the one that's under the booster. can you please help me out.
@ClassicGBodyGarage8 жыл бұрын
No problem. Please email me classicgbodygarage@gmail.com
@paulwoods18257 жыл бұрын
Brian how do you change the horns on a 84 GP?
@ClassicGBodyGarage7 жыл бұрын
Paul Woods they are located inside the drivers fender and easily unbolt and pull out from under the hood.
@paulwoods18257 жыл бұрын
Thanks Brian I saw them there but wasn't sure if they were able to be pulled out that triangle opening in the inner fender
@G_marvelous854 жыл бұрын
Do you have any euro header panels for sale?
@ClassicGBodyGarage4 жыл бұрын
Do not
@ogonzalez602og6 жыл бұрын
so do I put the old shims on with new fender or the new shims with new fender?
@ClassicGBodyGarage6 жыл бұрын
Every car and part is different so shim as needed.
@yungnthugng50046 жыл бұрын
I also got a 79 cutlass supreme wud that fender fit my 85
@ClassicGBodyGarage6 жыл бұрын
No
@possiblycrazy4427 жыл бұрын
So the header panel can stay but the hood does need to come off?
@ClassicGBodyGarage7 жыл бұрын
yes
@possiblycrazy4427 жыл бұрын
Thank you for the reply. I ended up doing it already. I did it on a Regal, and from what I experienced it's pretty much mandatory to at least loosen a Regal style header panel. Mostly because of the way it slopes. Removal didn't require it because the fender was badly damaged, but installation of the replacement required some wiggle room. Helpful video! It gets some credit for helping me finish the car in time for my first-ever road course track night! Regards, A fellow Brian
@ClassicGBodyGarage7 жыл бұрын
Awesome! Glad the video helped out. Every Gbody brand bolts up slightly different but this video is designed to get your off to a good start. See you in the next video!
@davidanscomb20343 жыл бұрын
Hi Brian, I’m restoring a 88 cutlass supreme classic. I am getting ready to take the front header panel and fenders off but do I need to to do a frame off or can I leave them on
@martabus16 жыл бұрын
Do you have a set of 14 or 15 inch chrome cutlass rally’s for sale?
@ClassicGBodyGarage6 жыл бұрын
I don't
@marzgtp8 жыл бұрын
email set
@markfrank498 жыл бұрын
I have a 84 cutlass supreme my temp Guage isn't working in have changed the sender and traced the wiring I'm at a loss with this any ideas
@ClassicGBodyGarage8 жыл бұрын
check my rally gauge fix video in the gbody how to playlist. I show how to fix the common issues with them and the temp gauge is part of the fix.
@heavymetalandanime4life9476 жыл бұрын
Will a 1985 monte carlo ls fender fit on a full SS?
@ClassicGBodyGarage6 жыл бұрын
No the front fenders are in fact different. LS fenders have a different lower section on the front of them.
@heavymetalandanime4life9476 жыл бұрын
Classic G-Body Garage thanks thought there might have been away around
@jobanyrojas11768 жыл бұрын
were can i buy a euro front end? for my 84?
@ClassicGBodyGarage8 жыл бұрын
FaceBook, Ebay, Craigslist. All over.
@yungnthugng50046 жыл бұрын
do u got a passenger side fender header panel n hood for sale for a 85 cutlass supreme?...
@ClassicGBodyGarage6 жыл бұрын
do not
@AwsAlkaissi5 жыл бұрын
Its easier and lighter if you take just the fender skin off ..
@ClassicGBodyGarage5 жыл бұрын
Not all Gbodys have a fender skin and this method can be used on all of them
@GBodyJames8 жыл бұрын
do you use head and shoulders on that awesome hair?? haha
@ClassicGBodyGarage8 жыл бұрын
LMAO!!!!
@GBodyJames8 жыл бұрын
Classic G-Body Garage haha just buggin ya!! even though ive pretty much done everything you post i still watch all your vids haha i have a bunch of g body vids too!!!
@skninjalotus58493 жыл бұрын
Just found your video. I think this might be a step in the right direction I need. I've got a 78 Caprice wagon that sits lower then normal ("3 clearance). My front tires rub horribly when I turn, so I'm trying to figure out the best way to fix my problem without having to switch out my front tires for smaller ones.