How to remove the rear bumper on Range Rover Evoque

[@DanSpeck]

Thank you very much for your helpful Range Rover Evoque videos. I have had to replace both rear tail lights and one rear fog light and without your videos I wouldn't have had a clue where to begin.

[@aph2667]

thank you guys, have just done this and can confirm it is impossible to change the fog light lens without taking the whole bumper off. I'm sure I would have broken something without this video so much appreciated!

[@JayKay-ht8rg]

I must say, I really love you guys! You’re videos have helped me out immensely! There’s not many DIY videos on the Evoque. So thanks for putting in the effort. It’s much appreciated!

[@jam4me2004]

Hi there..fantastic video! I’m wondering whether you can help me find/get access/fix my issue with 2012 evoque coupe 2.0litre petrol? Adaptive dynamics fault! I believe the car to be sound, however I’d love to diagnose this wiring issue myself….however I’m struggling to find said parts or videos to help! As mentioned I believe it to be the wiring fault which appears to be very common. However I can’t seem to find a fix/video relating to my specific model!?

[@deanattard-sq6bi]

Can the rear bumper lense be changed without taking the bumper off ?

[@kehdingerklondoor9666]

Sir, I think, you resqued my day! - no, you realy resqued my car! Thanks a lot for your help and so with kind regards from Germany

[@godsnextdoor]

Hi guys will I have to remove bumper and heat shield to replace a parking sensor or can I reach from underneath Thankyou👍🏼

[@Mitchellls]

H! Help needed. My Dynamic rear bumper/wheel arch (o/s) took a knock and has split the seam above the fog light. The two sections are held in place by plastic tongues/guides which have snapped. Can you offer any advice on closing the gap and fixing these sections together? Tía. Great channel and informative vids

[@L663]

I think you need some sort of minature seam clamp - like this ? 3dwarehouse.sketchup.com/warehouse/v1.0/publiccontent/fa3552f5-b064-45ba-9e67-071942775401

[@danfraser4484]

Any video on fitting a tow bar after removing the bumper? Please and thanks 😊

[@L663]

sorry no

[@danfraser4484]

@@L663thanks for response and no problem, do you know if a cut in the heat shield and bumper is a must for tow bars on a 2016 model?

[@SiliuxRE]

You just saved me over a Grand mate, Another driver bumped behind me and didn't want to go through insurance. Went to my local mechanic and wanted me charge me over £1000 just to fix my reflective Brake light on the bumper

[@L663]

Glad it helped

[@milesfisher278]

Great video. We have just bought a second hand Evoque and I need to remove the rear bumper as it came with an aftermarket tow bar which we want to remove. The strut wont come out without the bumper removed plus I noticed that the heat shield is missing as there is not enough room for this with the strut in place. We are picking up a replacement but the garage are supplying all 12 of the bolts with the 10mm head and not the t30. Does this matter? I prefer the ease of fitting of bolts so hope that all holes will accomodate them, worst case I need to find 8 of those T30 fittings.

[@L663]

Hi Miles - glad that the video is useful - the head of the bolt makes no real difference so you should be fine !

[@milesfisher278]

@@L663 cheers guys.

[@lisarai4315]

Hi i am planning to upgrade my pure/prestige to dynamic rear bumper complete set, how much roughly cost to upgrade at garage?

[@getno11]

I would really appreciate a video about removing the rear bumper of 2020 evoque as i could not do it. I would like to change the matt grey panels to gloss black panels.

[@L663]

Which panels are you referring too - the one that looks like a tow eye cover ( but is not ) ? as this week we will launch a cover for that panel ( as long as you car has round exhausts )

[@getno11]

Yes the lower diffuser ( which would be the tow eye cover if it had tow eye) and the middle part above the diffuser where the radars inserted. I tried to remove the bumper but i got stucked at the final step. The upper middle edge of the bumper where it meets the trunk edge was not lose. I was afraid of that i will break it if i force pulling it off.

[@sethcushingmusic]

thanking you for the video from north central Kansas. made it super easy!

[@fastedge1275]

Hello. Were you able to fix the prestige bumber? Im trying to fix a dynamic bumper on my prestige 2012 evoque . Will it work ?

[@bigchigga8671]

please help i cannot plut the bolts for the heat shield back on

[@paradepolishingandbulling]

Excellent advice. Worked a treat. My 2018 SE Tech has slightly different clips for the wheel arch. I had to pull the trim towards the front of the car to disengage the clips.

[@L663]

Glad it helped and interesting they changed that clip.

[@rleafs7144]

Thanks so much, helped out with my broken park sensor!

[@dennisb.8223]

can the rear bumper be removed Without removing the heatshild?

[@L663]

No - from memory you need to remove the heat shield

[@FlyWithAndy..]

Hi. Very helpful video, do you guys actually know if rear inner parking sensor can be replaced taking heat shield only or it must be whole bumper. Thank you in advance. Greetings from Peterborough.

[@L663]

Not 100% sure but i am pretty sure its bumper off.... Peterborough.....I know Spalding well !

[@gilesluder]

Thank you from Germany. This Video helped very much because my Bumper was broken. And now Ican enjoy the ride wit the evoque again. But now another question. How to remove the trunklock. Ihave problems with it please help me with a video or a massage

[@liaminemerouani5842]

Comment vérifier les 5 camera de l évoque 2013

[@addicted2soulfulvinyl]

Hi If im changing from a pure to dynamic rear bumper will i need to change the exhaust /silencer ?

[@L663]

Hi - this video should answer your questions kzbin.info/www/bejne/jp_Vo6ucj8Sqbas

[@youtulsa]

Do you have the video on how to remove the front bumper?

[@JayKay-ht8rg]

youtulsa Google is your friend!

[@karolmichta5345]

Hi .. do you know where is PDC module?

[@L663]

Hi - yes looks like it is in the rear luggage area new.lrcat.com/#!/12117/130809/131107/10512

[@karolmichta5345]

THX

[@nigelhill3711]

Always my go to for information.

[@L663]

Good to hear!

[@g_swedberg]

Thanks for the video! Made the removal super simple.

[@danjackson626]

thank you for a very useful video. I have to change the lens of the right rear fog intensifier which I can now manage. Dan jackson

[@eleelife]

Dude thank you so much for this video. You saved me a lot of 💰. Respect!

[@aakashsharma9770]

Is there a way to remove the bull bars and bottom side (skid plates) area from both the bumpers?

[@stevel6117]

Managed to loose the parking sensor inside the bumper, used your video and just saying thanks.

[@L663]

you are most welcome.... the internet is so cool... nice to seeing being used for good... too much hate on the internet.

[@panniechristou9644]

Top Dog ! Thanks mate just the job ! great Video

[@richardyoung641]

Excellent vid THANK YOU!

[@joao.nunes.corretor]

Muito obrigado!!!