How to Remove Watch Band Screw Links

[@c_farther5208]

I have a watch kit but none of the screw drivers fit. What size should I order?

[@joymorley8006]

Thank you for this info - I didn't realise they were screws. I could finally see the slot on top of the screw under magnification.

[@colt-one]

It's sad to know that this can't be done without a parts tray.

[@tricky92x]

LOL

[@DennyAtkin]

Thanks! Had never encountered screw links before and this was just what I needed.

[@onesirmichael]

Thank you very much. I like many other viewers did not know there were screws! Big Help! Thanks again!

[@downsouth1678]

Well explained , very professional

[@Ali4451_]

Excellent video

[@chrishewson40]

What if the screw slot is damaged? How do I get it out?

[@DougieFresh13]

Miserable without that vice!!! lol ive been working for an hour plus trying to get a screw out. Lovely band I have been wearing it lose for a year. Tweezers!!! Brilliant!!! I think I will listen to the Phish song whilst I fix the bracelet

[@cesarramirez9717]

Thank you for this video.

[@edwardescuyos]

Thanks!

[@stevekennedy2337]

What size screwdriver?

[@KendraZhang]

thanks!! this worked

[@kennethstover1741]

What if you can't get one out with tweezers, and there's no hole to push them out?

[@reboundless6181]

Do I need to grow my nails before I can do this?

[@robertb.3651]

Yes, the longer and filthier the better 😂🤣

[@Nat.203]

Mine has screws but the screws are on both sides and no matter which side I turn it doesn't loosen

[@raahimahmadwaqar8823]

N. J. P. same😢

[@rachaelc.5267]

same here. im trying to figure out can i even resize it?! if not, what a waste of money

[@soccerrrr]

I'm sorry to say you have just bought a fake watch

[@hugedickerinokripperino5299]

Haha. Get 2 screw things, one to hold the bottom in place and the other to turn, like a nut and bolt.

[@sinjon]

@@soccerrrr That doesn’t mean it’s fake. Screws are held in by loctite. The OP my need to heat up the screws with a hairdryer or a small torch for a few seconds to break the bond. It by no means means it’s a fake watch

[@rogersowers9837]

My band links has scew links on both ends?

[@dennism103]

I did mine the hard way like a dumbass with alot of cussing!

[@tomcognilio1816]

What if the screws are really tight

[@marcrose23]

probably because of loctite (adhesive/glue) that is keeping the screws in place - what has worked for me in the past is applying some heat with a hairdryer for a few minutes (be careful not to touch the metal with your bare fingers after you do), and then attempting to unscrew. Takes some patience

[@ScrumDelly]

Marry her

[@thinkertoo2995]

@@marcrose23 Thank You Marc R. I'm glad I read this because that is what is wrong with my band. I can't get the screw to come out. I will use the hair dryer tomorrow.

[@richardvacanti9103]

Cohesive G-unit That’s a really good one

[@liberator328]

What’s the size of the screwdriver?

[@sinjon]

It depends on your watch. I just bought a 1.8mm to resize my omega Railmaster

[@anewstacker7841]

Thanks for the clear tutorial :)

[@MKGamingInvesting]

It does not work without the holder sadly

[@chris61981]

how do I remove half a link?

[@abramporras7877]

If it just keeps spinning the screw is already loosen it just wallered out the pin so just find a way to pull the little screw out cause if not just going to spin forever goodluck

[@Sty3d8m100y]

I screw it too much , now it can be fixed in the link 😢

[@slick-01]

Cheers 🍻

[@redrumax]

Tried this and the screw came out 2 mm and now is stuck. Will take it to the jewellers...

[@jmeler1254]

hey my watch has hammed in links how do i get them out

[@craigh.9810]

On ham, try mayo.

[@Streetw1s3r]

What do I do when the asshole who put my watch together decided to strip the thread of all of the screws except for one so you can't get it off?

[@daamskippy2300]

the screw won’t come up .. it just rotates in place

[@jetskiwu]

You probably have pins or pins and collars. Are there holes in both sides of your links? If so you can push the pins out

[@c_farther5208]

Did not work! I even tried tapping it out, nope. Guess they know a lot about nothing! I have all the tools, also. Don't listen to these people.

[@sinjon]

Does your bracelet have screws on each side?