#HOW

[@1dineroray]

Thanks Bossman!! 2023 and this video still works!! Your the best

[@Indiantv05]

Thanku so much bro #really worked

[@creativehubofficial]

You are always welcome bro

[@versus9023]

what about if i have just the read-only state: YES , but the ready- only is No . How can i change the ready only state to NO ?

[@mkandakumar9696]

Same Question, any solution for this Bro😢, I'm dieing for the solution

[@prasannsahu4655]

Bhai solution mila kya

[@Naitik_0018]

I've also have the same question

[@NickSpencer-jl2dc]

​@@mkandakumar9696did you ever found a solution you help me

[@tikboydeleon4887]

it really helps thanks a lot

[@reyienbolivar1786]

How about when i type clean the dispart:has encountered an error: the media is write protected. What should i do?

[@josephuzoma9257]

I get this problems " DiskPart has encountered an error: Data error (cyclic redundancy check). See the System Event Log for more information. " and " DiskPart failed to clear disk attributes. " Anyway I can fix it??

[@MonuGamer00c4]

Same

[@gayanpriyadewa2561]

Dispart has encountered an error the request could not be performed because of an I/o device error see the system event log for moreinformation..why this.??? Please help

[@alshentec2286]

Awesome man thank you 🙏☝️🕋

[@hrx7730]

Thanks man 👍

[@creativehubofficial]

Welcome sir

[@eandkitsolutions9475]

hi, It says that I successfully cleared readonly but when I try to clean it, it says that the disk is still write protected and so I cannot proceed to the following steps.

[@obiwalter483]

Did you fix it? I'm having the same problem

[@iam_himanshub]

@@obiwalter483 same here

[@พงศกรร่องวารี-ฎ9ถ]

I do command "attributes disk clear readonly", but in detail disk show current read-only state: Yes.

[@sudheeshad8802]

Same happend to me brother!

[@creativehubofficial]

Use add USB port and try the process again

[@sandiprajeraut7453]

No solve

[@LXTPHOENIX]

@@creativehubofficial where and how can please demonstrate, I'm one of you subscriber.

[@keshaii_]

i'm facing this problem, 7years ho gaye hai pendrive ko. abhi tak sahi nahi hua hai. plz help me

[@Surya-SVL]

I'm getting an error in 'create partition primary'. And that error is "No usable free extent could be found. It may be that there is insufficient free space to create a partition at the specified size and offset. Specify different size and offset values or don't specify either to create the maximum sized partition. Etc......" Please solve my problem with reply..

[@creativehubofficial]

Try again

[@eandlservices1594]

DISKPART> format fs-ntfs quick is this correct?

[@creativehubofficial]

Yes

[@yellowhokage]

i cant clean the disk DiskPart has encountered an error: The request could not be performed because of an I/O device error. See the System Event Log for more information. how to fix this?

[@MonuGamer00c4]

Disc part has encountered an error the request could be not performed because of a n i o device about the system event log more

[@sudheeshad8802]

How to change current read only state to No?

[@sudheeshad8802]

How can i change that?

[@creativehubofficial]

Follow the instructions in the video

[@gyantech.com-zx3qt]

Thsnk you ❤

[@incidentbyshs5483]

diskpart faild to set attributes ...what should I do

[@mthokomthiloh2267]

I tried this and it still is saying "Current Read Only State- Yes" Everything else says No. Why can't I change the first one to No?

[@nikunjvadajwala]

When i create partition primary error show: diskpart has referenced an object which is not up to date

[@joerizclydeagtas3434]

will this remove all my files in the sd card?

[@creativehubofficial]

Yes!

[@energize_r886]

Please help bro i tried every solution to clear readonly but when i write"attributes disk" to check and make sure that i'm already cleared readonly but it still show "Current Read-only state : yes ,how should i do , please help.

[@creativehubofficial]

Are trying to fix the flash drive from the same pc?

[@blanco2206]

@@creativehubofficial am having the same problem and am doing it with the other pc

[@creativehubofficial]

Nope you don't fix it with another PC 🙏 use the PC you use to set the write protection

[@energize_r886]

@@blanco2206 finally i bring my pc to fixer, and even though your method not fix my issue because pc is have a many type of problem but i feels good that you tried to help ,thanks again Creative Hub ^^

[@creativehubofficial]

@@energize_r886 try the process on your PC and give me feedback ok?

[@aphroditeschild5980]

my sandisk cruzer glide 16GB suddenly "write protected" cannot format and checkdisk. only can read,not write anymore ,so bad sandisk quality!!! easeUS software also cannot format it!!! H:\>format H: Insert new disk for drive H: and press ENTER when ready... The type of the file system is NTFS. Verifying 14.3 GB Cannot format. This volume is write protected. Format failed.

[@creativehubofficial]

Just be patient I will be uploading a new video today so just stay tuned

[@lawrencerenz3926]

Dispart said Dispart has encountered an error. The request could not be performed because of an I/0 device error. See the system Event Log for mor information

[@creativehubofficial]

Make sure your USB cable and port is working properly and give it a try again

[@razen1214]

same problem here Still not fixed yet. And i think i will dont fix it, cuz it says The request could not be performed because of an I/0 device error. See the system Event Log for mor information. So i guess i will just go to the shop and buy another one.

[@razen1214]

And also i tried many ports.

[@creativehubofficial]

Check if your input/out (USB) ports are working properly

[@orethamnmp4]

Jan 1 my pc suddenly got a blue screen why factory reset and if this method works i will sub

[@universaltruth8652]

My "read only state" is Yes but "read only" : No what to do?

[@keshaii_]

i'm facing this problem, 7years ho gaye hai pendrive ko. abhi tak sahi nahi hua hai. plz help me

[@universaltruth8652]

@@keshaii_ bhai mere 4 years ho gye hain, sari duniya k softwares try kar liye but not resolved 😭💔

[@durganandpathak4465]

hey in attribute disk , in read only it is aying no but in Current Read-Only State it says yes ....... i am not ablle to format it pls help

[@vinitrajput6554]

Ur pendrive is virus infected, can't be fixed same as mine 😂

[@seemab_1200]

bropee! sub kuch same hwa but at the time of loading (0%) se ziada nhi jata and kehty hn k write protetion error 😒😒

[@sujanacharya4556]

sir i have done all the process but it shows virtual disk service error and the media is write protected

[@sujanacharya4556]

i have modify regedit done cmd but also my disk is write protected ... sir i have done all the process that you show us in video but it is not working in my pc

[@kraflic]

Not worked

[@creativehubofficial]

Check the next one in description

[@n_c4096]

DISKPART> format recommended override 0 percent completed Virtual Disk Service error: The media is write protected. plzz bro solve

[@creativehubofficial]

Watch my recent video on how to resolve error messages

[@n_c4096]

@@creativehubofficial plzz give me link

[@creativehubofficial]

kzbin.info/www/bejne/rKKwkIWQo9N5ntU

[@alkamadesigner4915]

Fake video.. not working.. I tried with powershell and CMD prompt both twice but nothing changed..still it's showing read only

[@EngineeringAddaa]

Dear this is not working

[@creativehubofficial]

Check description for link and try the other step

[@adamdiskandar47]

kalo udah rusak, ya rusak ajaaa,, masa aku ikuti cara ini beberapa kali tetap saja tidak bisa..

[@sivasankar8448]

I want a solution for the phones internal storage. There is no solution for my problem in this video. Please tell the solution to this.

[@creativehubofficial]

What problem are you facing?

[@creativehubofficial]

Increase your phone RAM and internal storage that's all you need to do to enable it work smoothly 🥰

[@ishimwesamuel9072]

I have a question say that, there is any way of which you can use to remove write protection on flash disk from another computer? When the computer use to fix it is lost?

[@creativehubofficial]

Let me make it clear here, trying to fix a write protection from a flash it must be done the same pc that was use to add the write protection... Thanks

[@SurgeryBeatz]

Un-plug your DVD drive and use those cables to plug in your HDD or SDD. Your PC should be able to actually read the hard drive. Once you do that. All this bull shit actually means something. 🤞🏾 Trust me on this one.

[@seemab_1200]

the write protection is like a fucking freak ! yr koi solution nhi kam kr raha i have tried even 19, 20 ways by watch many vids but the write protectio is freaking me up every thing is a fudge

[@madhavagrawal5581]

While doing cleaning it's shows an I/O device error

[@creativehubofficial]

Check your USB cable or ports if they are working properly.

[@babeymandefro2981]

counites

[@sabarinath8280]

Not working pure fake

[@creativehubofficial]

Follow it step by step bro, it works for me before I uploaded it so don't call it fake ok

[@sabarinath8280]

@@creativehubofficial bro after complete the last step but still the pen drive said the same so I commented

[@creativehubofficial]

Check your USB port, and make sure you must complete this same process with the original laptop you enter the write protection with. Understood?

[@sabarinath8280]

@@creativehubofficial i am using the same laptop and so checked the port