How to Repair a Broken Exhaust Pipe without Welder, How to fix a Flex pipe Muffler with no Welder

#How to Repair a Broken Exhaust Pipe without Welder
How to fix a Flex pipe and Muffler
Exhaust leak Repair
this Exhaust and Muffler Fixe and repair
on 1997 Toyota Camry, I try to explain
Where is or how to disconnect the Oxygen Sensor plug in Location
on 1997 Toyota Camry,
hope this Video helps you if it was don't forget to hit SUBSCRIBE or Share
thanks for watching until next Video, bye for now

[@davidmizak4642]

It's fascinating material you offer to your audience. Thank you very much for contributing. A heartfelt thanks!

[@trankt54155]

Excellent job and thanks for posting the video. Those heavy-duty clamps are not cheap...

[@namechange9470]

Very nice. I just bought a truck that someone cut all the cats off of. Been trying to rig it up with what the autoparts store closest to me had to offer. Going to try again tomorrow as everything I have tried has pretty much been a FAIL 😂

[@IshMotorparts]

Good luck Bro, don't work hard today God bless

[@travisyayes6343]

Good job brother. I've got similar problems with my exhaust that I need to fix and your video is helpful. Thank you 👍

[@IshMotorparts]

thank you for watching and I'm glad you like it

[@elgatogordo9523]

Thanks for the video 👍 I have a Camry like yours that will need the flexible pipe replaced soon.

[@IshMotorparts]

You are welcome for the Video and be safe with yours

[@user-gm1rr1tv6k]

This was one of the MOST helpful videos I've seen on "how to" repair exhaust. Thinking outside the box. Very well done. Excellent editing job of video. Keep them coming, and stay safe. God bless. Oh, and, were you recommending use of J-B Weld Exhaust System Sealant (4:57) - audio was light there.

[@IshMotorparts]

Thanks for the positive comment and for visiting ish MOTORPARTS God bless

[@Turtlefarm]

Use zip ties to keep the handles of your cutter closed.. and as you get deeper in the cut.. pull the zip tie tighter.. you can let go.. relax.. and just work the tool back and fourth

[@IAMHIM4040]

Or…or….just be a man and muscle the sht

[@PhilipLibby-my5tl]

That how I did it as well

[@alalan3735]

Very helpful info!

[@masonpugh3637]

Great job 👍

[@DesiJugaarDIY]

Good job bro !

[@agamurtuza8963]

Thanks senor

[@victorialove4875]

Thank you

[@pissonmyass6430]

good job

[@dieselburner4461]

The intro lol 😂 thought I was turning on a 90s arcade game

[@IshMotorparts]

LOL, is that supposed to be good, Funny, or what? LOL

[@norelation5344]

Practice with the welder you will get better just takes time to learn

[@IshMotorparts]

i don't like comments like this, I JUST LOVE AND LOVE IT!!! LOL. Thank you for inspiring Comment love it

[@dawsonrice1540]

This man has skills

[@IshMotorparts]

Alright Dawson Rice lol

[@maryshan80]

Nice job

[@IshMotorparts]

Thank you my lady, and thanks for watching

[@CHIBA280CRV]

Nice job amigo 👍👍👍👍👍

[@IshMotorparts]

gracias my Amigo

[@gixxer750cc]

1:08 My exhaust disconnected in the same exact spot... It was crazy LOUD and I could smell the exhaust fumes in the car while driving... SMDH I was going to get it welded - then I thought about it for a minute and went searching for something to hold the two pieces together. I came up with this "Nickson 2in to 2 1/4in Laminated Split Flange" I've seen a pic of the job done with just one but I bought two to be on the safe side and some Permatex sealer... (A Few Hours Later) Job is done and the exhaust is SILENT not a peep (I'll do a soapy water test on a warm day) I used some (Blue) thread lock on the bolts as well... Peace

[@IshMotorparts]

I hope you get yours done because its sounds so unpleasant , thanks for the visit

[@temelon]

Should an adapter have cut lines? I was just thinking if the clamps will hold. I mean adapter should squeeze when you tighten the clamps.

[@IshMotorparts]

Yes the Clamp it will squeeze tight no need to cut line just make sure clean the rusty one very good

[@irisbaez1972]

Any way to do maintenance to that part, like spray wd40 or other thing? algun l,iquido para evitar oxidation y no tener queue llegar a see extreme?

[@IshMotorparts]

Hola Amigo, es una buena pregunta pero no creo que existe un Líquido para Evitar este problema el único solución que Yo se Es comprar Pipes/Paypas, de alta calidad como (ss) eso sí duro mucho tiempo ,Muchísimo gracias por visitar Asta luego

[@keithtaborn6101]

❤

[@antoanhutchinson344]

Where can I get the adopter and the clamps for the job?

[@IshMotorparts]

Hey Antoan, if you live in USA You should able to find them at your local Auto parts store, here in Tennessee I got mine from autozon Auto parts and Advance Auto parts store. Thanks for watching this video, come back soon!!

[@doubleeggz7748]

Where did u buy all the parts, i have 2005 Toyota Camry and the same problem. Plz give me all the parts name. Thz u

[@IshMotorparts]

I bought them from my local Autozon auto parts store, and the Names is Surebilt, you just have to measure your old ones to get the exact size you need I thought i explain it enough on this video I sorry, thanks for watching

[@willpage79]

Its that a temp or perm solution?

[@IshMotorparts]

that is a permanent fix/solution

[@alb12345672]

Those exhaust autozone parts are lucky to last 1 winter in upstate NY. The rust to nothing.

[@IshMotorparts]

Yep I can see mine already

[@IshMotorparts]

So do you know where to found any high quality ??????

[@alb12345672]

@@IshMotorparts You have to find stainless steel exhaust parts. They are probably hard to find and much more expensive. The autozone stuff is made from Aluminized steel. It has some minimal rust protection vs pure steel. I say if you need exhaust work (e.g. you are not in Arizona) that stuff is temporary. I did do a quick search and advance auto seems to stock some SS parts.

[@demelom2596]

All about saying money not very cheap when you take it to an auto shop.

[@IshMotorparts]

You got that right

[@kodab928]

What sizes were the clamps that you used on the flex pipe

[@IshMotorparts]

Sorry for replying late. As you see in video I used a adapter on one side of the flex pipe so from the Cat or the engine the Size is 2-1/8" I and on the other side 2" inches so basically I used 2-1/8" and 2" Clamps on the project

[@jubjubs1000]

Go figure the flex pipe i have to repair is right on the curve off the headers lol fml

[@bradphillips7074]

Cutting cats off and not replacing is illegal in 50 states.

[@oneyriver7369]

Español también lol

[@IshMotorparts]

JAJAJA 😂

[@prtbone78]

How title a video repair no welder but weld. Smh.

[@tonyespinoza3034]

THE REPAIR THAT WAS DONE WITHOUT WELDING IS OK; BUT?,,, I DON'T KNOW WHAT TO SAY, IT TAKES A LOT OF COURAGE TO SHOW THAT HORRIBLE WELDING. WITH ALL MY RESPECT, FOR PEOPLE WHO DO NOT KNOW ANYTHING ABOUT WELDING IS OKAY,,,, BUT?,,,, IN MY CASE?,,,,, I WOULD NEVER SHOW SUCH UNCOOKED-WELDING BEANS. IF FOR ANY REASON I AM WRONG, I HUMBLY APOLOGIZE. "HONESTY AND SINCERITY, ARE THE FIRST CHAPTER IN THE BOOK OF WISDOM." (T.Jefferson.)

[@TheHmurveit]

Do you need adapters?

[@IshMotorparts]

Yes i used a adapter between the flexpipe and the man pipe from the engine, this should be visible in Video, thanks for watching

[@TheHmurveit]

@@IshMotorparts I watch the video that’s why I asked. I got the flex pipe and I got the brackets I didn’t get the adapters how do I know if I need them or not ? Thanks

[@IshMotorparts]

@@TheHmurveit you shouldn't need one because the flexpipe you use it as a female on both end the only reason I used one because who ever worked on the pipe before me they used a bigger pipe so I use a bigger female between the flexpipe and man pipe from the engine. So check and see if is the same size pipe on both side of yours, Hope that helps

[@TheHmurveit]

@@IshMotorparts thanks

[@Mr.MountainGrass]

Understand without welding means no welding duh

[@ragnaroksangel]

Watch the fucking video and listen before saying stupid shit, DUH

[@martaflores4047]

The idea he was giving was that you could use clamps and adapters also He clearly said he needed more but he was to cheap to go buy more so he was welding his