How to Repair and Remove a Chair's Gas Cylinder? Sinking Chair Height Repair! It Will Not Appear!

[@tusharkurkute]

Awesome idea to remove the gas end from the chair bracket (Heating process)... Almost saw 4 videos before this but no one showed heating process... just happy by re-installed new hydraulic cylinder in my chair... thank you for the posting

[@tomsdreamshopworx]

Awesome! I already had a piece of pvc. Took me all of 5 minutes to take it apart, measure and cut the pvc and reassemble. Thank you for posting this!!

[@blindlygoing]

Best video on here that shows a gas lift properly with the covered removed which is what my chair uses.

[@ChefGuruJeff]

Never mind the repair. A friend once replaced it with Bilstein/spring/shock setup. More importantly, who did the music? It's exceptional acoustic work. Applaud.

[@mjmb123]

It seems that the up and down funcion won't work anymore. It will stay on one hight. Am I right about that? What I am looking for is how to fix it, meaning how to make it go up and down again.

[@MrSirDudeGuy]

You are correct; no height adjustment. You can’t repair it. You have to buy a new one.

[@arshadalibhutto6423]

Better then Just Down ..

[@Barnagh1]

This is a bodge, not a repair. Misleading title.

[@Test-yq5lb]

Good. However, why do you need to take this as much apart? Just take off the bottom clip and slide the cylinder out. Leave each part attached to the base and the chair. Split the pipe and put it back again. That will do as well. No hammers or burners needed.

[@noymorgenshtein9191]

did you just heat a gas cylinder?

[@catman1353]

I think he did lmao

[@HAF-ei8lv]

yeah i stopped watching at this point

[@Yo12327]

@@HAF-ei8lv Yeah , what a stupid troll .AnD he didnt fix the height adjustment too for all this work

[@Kolshen]

when chair lose the height adjusting; it means that there is no gas inside the cylinder so no problem to give some heat, I guess.

[@jjryan1352]

Do you think there is flammable gas inside? 🤣🤣🤣

[@shunyabinduinteriors]

If a single person is going to use it then the idea is awesome and saves on the cost of a new gas lift.👍 awesome

[@DrozChann3L]

i did this, no more sinking, thanks!

[@ibringthelastwords1358]

Hi what size of pipe did you used? Thanks brother!

[@Kolshen]

1 inch pvc pipe for inner diameter

[@Emit_The_Great]

The stick part where the three things are at on mine is stuck inside how do I take it out

[@tuopinionno]

Sweet, just what I was looking for. Thank you.

[@razzaqagro2023]

thx

[@fzz6716]

The bearing and the clip broke for me. Can't find replacement parts in Amazon India. I checked gas lifts ok Amazon and they seem to come with the steel clip at the bottom.

[@rmallea1]

Even better. Thx.

[@SecretStaycationDetectiveEgg]

thank you so much bro. I stole a small piece of PBC on my neighboor haha

[@bobsagget823]

video starts at 1:00

[@arshadalibhutto6423]

Thanks for give me Hint

[@arshadalibhutto6423]

Best also best ...

[@piciuflorentin9939]

Why does everyone suggests in blocking the cilinder at max and not actually FIXING IT to work as before!?

[@hanyshehata2420]

الكرسي كدة ولا هايطلع ولا هاينزل انت كدة ثبته في وضعه

[@HAF-ei8lv]

Stopped watching when this guy took a gas cylinder to the stove. i think ill buy myself a new chair.

[@Kolshen]

when chair lose the height adjusting; it means that there is no gas inside the cylinder so no problem to give some heat, I guess.

[@pramodsawarkar90]

Best

[@jonelbondyingnuezca742]

Fire? Dangerous, those gas cylinders do explode.

[@ahall3823]

There is a much simpler fix... Just give the shaft a light clean, then spray WD-40 on it.

[@julittok]

That only lasts some time in the best of cases.

[@ShiroiRyuu24]

And now you wont be able to adjust your height good.

[@mazenalsaka]

اوك

[@ravishankar-zx1py]

you dint show how gas lift works

[@ketmax2805]

Mans really just used fire on a gas cylinder

[@Kolshen]

when chair lose the height adjusting; it means that there is no gas inside the cylinder so no problem to give some heat, I guess.

[@ketmax2805]

@@Kolshen fair enough

[@27nurjahan35]

কোথায় এই কারখানা?

[@kenkravitz2437]

Verbal explanation would have been helpful!

[@anshilup625g]

Too much Effort no need gas just hammer in mechansim by holding vertically

[@rakeshram2586]

🤩