How to repair the 300bar 4500psi pcp air rifle hand pump part 2

[@brorjordas1979]

Nice videos! Just watched both parts. Ordered a hand pump a couple of days ago. It seems to be the same pump as this one in the videos. I were just doing some research in beforehand. And these videos showed everything quite clearly what to be expected of these pumps being in build. Just great! Thank you!

[@cobyleo3343]

Thank you for your comment. Please follow us and subscribe.

[@chrisabraham8793]

What type of cooling fluid do you use or is recommended.

[@cobyleo3343]

car engine cooling fluid it is OK .because usually it is below than 90 °C ，

[@gigolocan8914]

Shouldn’t there be silica gel in the base? There is on mine that looks exactly the same

[@sjssssiiwwijdbd]

What is the benefit of putting a small amount of oil in the tube?

[@przemo13067]

What liquid and how much should I fill such a pump with ?

[@willewille9595]

Thanks for a good and informative video. If you happen to screw things up (As I did) and loose the coolant fluid: What fluid can it be replaced with and how much is needed?

[@cobyleo3343]

car engine cooling fluid,(because it is can keep low temperature )

[@willewille9595]

@@cobyleo3343 Thanks! How much should be filled?

[@cobyleo3343]

@@willewille9595 contact me whatsapp my whatsapp is [phone] coby

[@cobyleo3343]

@@willewille9595 80%

[@willewille9595]

@@cobyleo3343 80% of the tube length I guess?

[@mamatlau1239]

Sir,I would like you to ask some question,my handpump doesn't work while fitting in my rifle,but when pump freely the it pumps out correctly,but why it doesn't work while we installed in a gun?

[@cobyleo3343]

Because each pump has a pressure plug, so you first use the pressure plug to test whether the pump is working properly.If the pump works, then problem it's your gun's adapter.

[@mamatlau1239]

@@cobyleo3343 my gun's adapter is okay,when we pumped it with others pump,there's no problem,I thik it's my handpump

[@mamatlau1239]

Can you figure out where the problem is

[@cobyleo3343]

@@mamatlau1239 According to your description, I don't know what the problem is.We need more information, such as picture information or video information.

[@marcussanchez4278]

But a high quality pump from the uk

[@cobyleo3343]

our 300bar 4500psi high pressure pcp hand pump made in china.hope you can like our youtube channel .

[@juncalub9609]

Sir how much price.

[@theplinkerslodge6361]

My brand new, never used pump, won't pump. I can't raise the handle without it creating a vacuum. What is clogged?

[@jollyrancher400]

I second this

[@cobyleo3343]

one way valve need clean,hope you can like our channel, www.pcp86.com

[@cobyleo3343]

@@jollyrancher400 one way valve need clean,hope you can like our channel, www.pcp86.com

[@theplinkerslodge6361]

@@cobyleo3343 Yes, thank you - I wonder if it was assembled wrong. I didn't want to debug a brand new pump, so I returned it and ordered from a different supplier. Maybe there was a bad run of pumps at the factory.

[@cobyleo3343]

@@theplinkerslodge6361 you are welcome,and hope you can like our channel ,

[@BernyAV]

Sir, which is better, Silicone oil or Silicone grease on this pump?

[@cobyleo3343]

After our many tests, as well as in the use of the process of comparison，Our engineer told us The oil of the liquid flows better.Lubricating grease is not good at flowing, So the effect is not very good. www.pcp86.com

[@BernyAV]

@@cobyleo3343 Thank you for replying sir. One more question sir. What weight (viscosity) Si oil is best sir?

[@cobyleo3343]

@@BernyAV you can get that oil in our hand pump packing,it is free.no need you buy it.

[@BernyAV]

@@cobyleo3343 Wish that were the case. They remove all liquids from items shipped to Philippines that's why my pump has no Silicone oil. Good thing they didn't know about the coolant inside. Hahaha

[@cobyleo3343]

@@BernyAV whatsapp [phone]. i will send you details

[@tonyclavell7861]

is no coolant inside my pump ?

[@cobyleo3343]

it should be have.