How to Repair Water Blaster - Karcher No Pressure

[@mdouras2571]

Great instructional guys. No 10 minute chatter before hand like all the US guys like to listen to thoer own voices. Just simple straight forward clear advice. I have this machine and it's a rare thing now.

[@AutoBuddynz]

Appreciate the support! These were the golden era of machines built to last

[@PatrickVanReeth-e8y]

I bought a Karcher 620 25 years ago, and I met this very problem 10 years ago. I found your video last week, and I followed precisely your very accurate procedure. the final result is perfect !!!! it works again now. 1000 tanks for the good job !!!!!

[@AutoBuddynz]

@@PatrickVanReeth-e8y Thanks for the support! If you like this video and subscribe it will greatly help us keep creating content

[@TheFordna]

What a great video - great instructions and diagnosis - saved me hundereds of $. Loved your explaination of the symptoms - thanks

[@AutoBuddynz]

Appreciate the comment, thank you!

[@robertjones6488]

When I had a boat my 620 was used very often but now it is just used once a year and needs this fix very often. But I always have to check the procedure here, so thanks for the great video. A couple of points. I manage to get the unloader out without removing the electric box by sliding out the rubber attaching the electric box to the piston housing. Also, if the piston is stuck fast, be careful not to damage/bend the thin piece of rod using pliers. If you unscrew the rod from the piston, you can put in a long bolt and give yourself more power/ leverage to remove the piston and replace the rod undamaged.

[@AutoBuddynz]

Thanks for the info.

[@faletiute]

Thanks alot for the video, it really helps us diagnose our waterblast. Just one more thing, how to get those sets of rubber rings and those kind of grease?

[@AutoBuddynz]

We got that from our local Karcher Dealer just ask for the parts / service department

[@faletiute]

Is it possible to deliver to Fiji if I place the order from Fiji?

[@AutoBuddynz]

@@faletiute I suppose, might be best you contact them via email

[@Dezza318]

Excellent video. Thank you so much. I have 3x of these machines and each one has a similar problem or leaks. I never had the confidence to diagnose the problem but now I will give it a go.

[@AutoBuddynz]

Great! And thanks for the comment

[@Wayne-Jones]

Wont help me with Karcher issue but well made instructional video 👍

[@AutoBuddynz]

Thanks!

[@rilosvideos877]

Great instruction and exactly to the point! My machine is suffering from this exact same problem - every year again! When you don't use it for a while the pressure valve gets stuck and corroded and won't work properly. I have to re-open and clean it every time but maybe i missed to clean it properly and re-lubricate it. What type of lubricant did you use? Is it silicon-based?

[@AutoBuddynz]

@@rilosvideos877 Thanks for the feedback. It's a silicone based white grease

[@rilosvideos877]

@@AutoBuddynz Do you have a link or exact name, consistency data?

[@AutoBuddynz]

@rilosvideos877 I don't as it was bought without labels from a Karcher Dealership

[@Alsan]

Do you know were i can buy the rapair kit of this blaster? I'm from brazil, here i can't found it. Thanks!

[@AutoBuddynz]

@@Alsan Amazon or Ebay I think

[@Alsan]

@@AutoBuddynz but how i can search this? Karcher K620 Repair kit?

[@AutoBuddynz]

Try K620m karcher

[@Alsan]

@@AutoBuddynz tks, i'll try!

[@UbayLanas]

Thanks for posting this. It gave me insight into how to fix my Archer 410. Blessings

[@markward38]

Thankyou for your very good instructional video. For many years my old 620 has suffered this problem and now I know how to fix it. I have another problem with my 620 though the switch on top of the unit won’t remain on when I push it down the way I keep it on is by placing some very heavy sticky tape across it . Any idea how I can fix it.

[@AutoBuddynz]

Thanks! Open the switch and see what the issue is. Not difficult to replace this with another waterproof one if needed.

[@Spoonrrr]

I have the exact same problem. Was looking for this on KZbin for soo long. Now I found it!

[@brandywell44]

Thankyou for your helpful video. I had a problem today with my 620M which cut out and it was the machines thermal switch which reset after 30 mins. The reason was my own fault as I fitted a rotary lance and didn't bleed through first. It jolted the system and cut out. Okay now, though I do have this same issue you had too, so a rebuild is something I shall have to do also. It is over twenty years of age and worth looking after.

[@AutoBuddynz]

Thanks! Glad it was useful.

[@brandywell44]

@@AutoBuddynz I followed your video and took it apart this morning and rebuilt with a clean and grease. It is now working properly. Thankyou again.

[@AutoBuddynz]

@@brandywell44 Appreciate the feedback, thank you!

[@eduardotirapelle1064]

Thank you so much for the class about cleaning solenoid valve I have my Karcher 620 M since 1997 and I love the machine, but during this period I've probably sent the machine at least 15 times to clean this solenoide, thinking tha it had to be replaced. I probably invest about 02 ot 03 time the machine's value, reparing it I'll not send it anymore to the technical assistance.

[@AutoBuddynz]

Thanks for the info!

[@jagpessoa]

Hi, did you have to have an M adaptor to use the Karcher Foam Gun? Thank you!

[@dnkjdnkj2679]

I have been offered one of these K620M machines. How old are they and are they a long lived machine worth rebuilding or better to purchase a later model such as the K5 series? Thanks for the clear video.

[@dekurvajo]

I just bought this machine almost like new.instead of a K4. My reason was exactly the reason you pointed out here. No bluetooth, no mambo jumbo, but induction motor, no plastic, simplicity, - my right to repair -

[@AutoBuddynz]

@@dekurvajo They are great water blasters.

[@johnw8476]

Exact same issue a few months back now it wont reach full power even when adjusting the nozzle.

[@kenlee5461]

What type of grease is that? It's a great informative video. Thanks

[@AutoBuddynz]

Its the grease Karcher supplies. Just visit your local dealer. White type of grease

[@siman1969]

Very good explanation😊

[@AutoBuddynz]

Thanks, appreciate it!

[@charliechan4650]

Excellent video

[@AutoBuddynz]

Thanks!

[@joemoore5570]

Hi, great video, I have a K5 not the power control one just the normal one and it doesn’t seem to have any power as in when you turn it on with everything connected nothing happens I’ve left the water to go through as some people say about the air locks but even after trying that and taking it apart I can’t seem to find what’s wrong with it? Any help would be greatly appreciated thanks.

[@AutoBuddynz]

Hi thanks, does the electric motor start running? As it could be a bad motor start capacitor or maybe the on /off switch is playing up on top of the water blaster.

[@joemoore5570]

@@AutoBuddynz Hi thanks for getting back to me we took it apart and water had got into the coil.

[@michaelavdalis4382]

Mine is leaking water where did you get the replacement o ring

[@simonmilgate6606]

Hi i have the 620m and it all starts but have no pressure at all anything you could help with please thankyou 👍

[@saimirnikolli4748]

Thanks so much I did the same and it worked fine ☺️

[@AutoBuddynz]

Awesome!

[@jaydejaqaline6318]

Hi. My Karcher k2 water pressure has dropped. How can i get it fixed?

[@AutoBuddynz]

@@jaydejaqaline6318 Start by checking your inlet filter.

[@alessi1973]

Where did you get your o rings from as Karcher have discontinued

[@AutoBuddynz]

Kits are available on eBay.

[@alessi1973]

@@AutoBuddynz thanks ... but I found them at ABC bearings

[@AutoBuddynz]

@@alessi1973 thanks for the info, I'm sure it will be useful for others. Do you have an address?

[@gopakumarnarayanapillai5460]

Pls show about hd 5/12 full service

[@toshyt]

Great video 😊

[@AutoBuddynz]

Thanks for watching

[@markbusby9709]

Thank you

[@AutoBuddynz]

Appreciate the comment!

[@klaussiegl9245]

What sizes are the orings?

[@haddarakhaled7147]

Et pour le détergents comment il fonctionne sur 620m