How to Repaste and Clean a Huawei Matebook D14 Nblk Wax9x Laptop - Step-by-Step Guide✅

In this video i will show you how to do a repaste service and clean your Huawei Matebook D14 Nblk Wax9x 💻 laptop STEP By STEP.
🔵 #1 thermal paste: amzn.to/39BnQjB
🔵 #2 thermal paste: amzn.to/3xDpskD
👉 Tools used:
✔The proper Teardown kit!: amzn.to/2CATV8e
✔Shop Towels Original: amzn.to/2TFXF0O
✔Tweezer Set: amzn.to/2yvNjVV
✔Guitar Picks: amzn.to/2XJc6lT
✔Electric Screwdriver: amzn.to/2D0iGvq
✔Thermal Paste: amzn.to/3GdTH4s
✔Canned Air: amzn.to/2yzuNf9
✔Alcohol isopropilico: amzn.to/2KoKqil
✔THICK insulated jumper wire: amzn.to/2XL9GTF
✔Kapton tape: amzn.to/3ksJTJD
✔Freeze Spray: amzn.to/31DyAFQ
✔Conformal coating: amzn.to/3iqd12o
✔Air Duster : amzn.to/3oqEw1V
👉 Equipment Used:
✔Portable Soldering Iron: amzn.to/31zPipL
✔Air Duster: amzn.to/3oqEw1V
✔Hakko Hot Air Station: amzn.to/2O1k0PX
✔Nozzle for hot air station: amzn.to/2D21XYM
✔Hakko Soldering Station: amzn.to/2PRrtCF
✔Microscope: amzn.to/2CDqyCb
✔Kester Solder: amzn.to/2D2Bl9R
👉 Diagnostic tools:
USB amp meter: amzn.to/3knyElX
USB-C amp meter: amzn.to/2CbaPMK
On-Screen multimeter: amzn.to/33MV5uP
CHEAP multimeter: amzn.to/2DBnERh
Bench PSU: amzn.to/3kwiyGs
👉 Ultrasonic Cleaning:
ALL Laptops & CELLPHONES: amzn.to/2XLBnvM
Branson EC cleaning fluid: amzn.to/3aaa6Il
🔵 Leave a tip for us via cryptocurrency / PayPal if it helped you out:
› PayPal: is.gd/SL4AoD
› Bitcoin: 1Gc6ekScTjvcnSHoFGvu7nbBo3cyYzfsAL
› Ether (ETH): 0x9dd9F855DAE0586980Ef7786E53e4E275BdC6985
› Litecoin (LTC): LTFQ14vaan4Fc3QqW3cn4NnWV7cvgrXWhk
› Bitcoin cash (BCH): qp4mecuy2q2rqvctdpuv5m0m05y6r8g64c3a48gf78
› TrueUSD (TUSD): 0x9dd9F855DAE0586980Ef7786E53e4E275BdC6985
› XRP (ripple) : rNBVHSfb3iZXYaWm491zVBzYfaxnNnAoCs
› Doge coin: DGspV9CkUqYJUb4ygNVz4aekmgmq5i12Pe
✖ uFixTek is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com
#laptopDIY #Laptopservice #laptopteardown #laptopupgrade #laptopreview #DIY #electronics #laptopRepair

[@ludwicz]

Thank you very much! I was clean and repaste according to your guide!

[@uFixTek]

It's my pleasure, my friend. 😊 I deeply appreciate your taking the time to provide feedback. If you're inclined to support the channel further, feel free to like and subscribe-or even both! Should you have any questions or requests in the future, please don't hesitate to ask me. 🍻cheers

[@thales7012]

Very helpful! Thank you very much!

[@uFixTek]

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

[@devilhunter1555]

cool stuff man, I'm rooting for you!

[@uFixTek]

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

[@tanaka7]

10:25 Thank you for your video! I applied the thermal paste as you have shown (line in the middle). I may have used a little more of the paste and now I have the feeling that my laptop is getting hotter than before. Have I used too much? I have read that too much can impair heat dissipation.

[@uFixTek]

It's my pleasure my friend. 🫠Regarding your question, i don't think you have placed a lot, just a line is fine, open it and if you see the paste is over the CPU and to the sides then sure you have placed a lot. also make sure you use a ORIGINAL branded thermal paste like : thermal grizzly kryonaut: amzn.to/3WItVQW this is the best thermal paste for the laptop, there are many fakes out there. Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻 This is an Amazon affiliate link. When you use my links, you are helping to support the channel. 🙏

[@marijnstollenga1601]

Great video, very informative!

[@uFixTek]

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any further questions or requests in the future, please don't hesitate to ask me.

[@ayasebbar9925]

Thanks is so helpful 👍🏻

[@uFixTek]

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

[@djkingismyslat910]

Do you have a video on how to take the dc jack out and put it back in on a hp pavilion gaming laptop?

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: can you give me the model number of the laptop

[@CodeKokeshi]

I'm watching this on my Huawei Mate D14. I used to be able to play Genshin and Tekken 7 at medium graphics but now it tends to overheat. And lags a lot. I know a lot about computers I built and fixed a lot of them but I'm not familiar with laptops hardware. I did what I know like resetting it, debloating it and etc. Now, what's left is checking the hardware.

[@uFixTek]

🫠Regarding your question, you will need to repaste and use a high quality thermal paste to get the temps back under control. Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻

[@CodeKokeshi]

@@uFixTek I just bought the necessary tools online. And when it's delivered I'll come back to this video.

[@CodeKokeshi]

​@@uFixTek Yey, after 2 weeks I managed to clean my device. There is a lot of cat fur and other stuff in the fan. I also repasted it,

[@donwld]

Do you know what exact size or symbol those case screws are? I have one missing in my laptop, so am looking for a replacement.

[@uFixTek]

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, i would recommend you get the screw pack and you can find it in there the exact size bade on reference of the other case screw. amzn.to/4aiUcdl Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻 This is an Amazon affiliate link. When you use my links, you are helping to support the channel. 🙏

[@yimboes.508]

Nice video, thanks

[@uFixTek]

It's my pleasure my friend. 😊 Thank you for taking the time to give feedback! If you would like to support the channel, please like, subscribe, or both. :P Should you have any questions or requests in the future, please don't hesitate to ask me. cheers🍻

[@jaypeemasongsong6201]

Good day, sir how to prevent heating to my HP 745 G2 elitebook, and what is upgradable in this laptop. Thank you for replying to me sir

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: i highly recommend you to open and repaste and clean the heatsink 1st and upgrade the HDD to SSD. here is a Elitebook a bit different model but all elite book open the same way, use a bit of logic and you can get it open, kzbin.info/www/bejne/mWLWg31sp6iXmK8

[@F.A_info]

Hi, With the same PC I disconnected and then hung up the speakers but they don't make a sound. They only make small crackling. Do you have any advice? And the audio drivers are up-to-date.

[@uFixTek]

😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: this laptops have a very weak audio chip, and it's not repairable at home. but i need you to create a live windows usb drive and boot to that and do an audio test.

[@aiko2386]

i need help, same model but my heatsink > cpu screws wont unscrew, any screw type i use wont unscrew it

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question:here is a best and safe way to remove the screw watch this video and you get the idea how we remove it.: kzbin.info/www/bejne/i5KwgGOpfZlojKs

[@erdempn]

Which direction should we turn the processor screws to remove them? I pushed so hard that the screw broke. I'm so sorry, please help.

[@uFixTek]

Regarding your question, the screws open clockwise. Imagine it's a bottle cap; you twist it clockwise.

[@erdempn]

​@@uFixTekI think I had trouble because I tried to open it counterclockwise... The screws were damaged, do you have any idea how I can open it?

[@uFixTek]

if you damaged the screw head check this video, and see how i removed it. kzbin.info/www/bejne/i5KwgGOpfZlojKs

[@Grion007]

I can't remove the screws on the heatsink despite using the same screwdriver I used for the fan

[@uFixTek]

press harder down on the screw and use a longer handle screwdriver.

[@erdempn]

​@@uFixTek aynı sorunu bende yaşıyorum 😭

[@kevin1531]

Thanks broo

[@uFixTek]

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.

[@experimentaenlavan8081]

Hola. Gracia por el vídeo. Podrías decirme el tamaño de ide de este procesador? Gracias

[@uFixTek]

no lo tengo uno por el momento abirto para medir. si me llega uno esas semanas abro y te informo. para que requiere?, que quieres hacer amigo? saludos

[@experimentaenlavan8081]

@@uFixTek gracias por tu repuesta!! Le voy a instalar una thermal grizzly kryosheet. Otra pregunta para ti. Se puede instalar una segunda unidad de ssd en el mate d14??

[@uFixTek]

compra el de 25 x 25 mm sobre el nvme solo puedes llevar uno de hasta 2TB, ya que el 4TB es de doble cara chip y no va entrar. saludos

[@experimentaenlavan8081]

@@uFixTek gracias señor!

[@uFixTek]

un placer 🍻

[@Samuel_Mora]

Hello, could someone tell me what size the iHS of the Ryzen 5 3500u processor for laptop is, I was researching and I can't find that information, I'm asking to buy a kryosheet thermal pad of the correct size. Greetings

[@uFixTek]

Regarding your question, no laptop uses a IHS, or the PC CPUs use IHS. now if you mean the dye size of the CPU then that is something else, if you want to place a kryosheet you will need to get a Kapton tape and tape 1-2cm around the CPU or GPU dye, then get : 24 x 12 x 0,2 mm amzn.to/3SgH8gw Should you have any further questions or requests in the future, please don't hesitate to ask me. cheers🍻 This is an Amazon affiliate link. When you use my links, you are helping to support the channel. 🙏

[@Samuel_Mora]

@@uFixTek Hello, thank you very much for your kind response, I don't know the technical names a little but I see that you understood well what I needed, greetings!

[@uFixTek]

It's my pleasure my friend.

[@lieutenantdrone6059]

i just want to ask.. i have the same matebook d14 and its screen is flickering.. i tried a bunch of solution in the internet to fix the software but it doesnt work and i think the problem is in the hardware.. what could be the possible issue there that causes screen flickering?

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: we do get this issue a lot in the store with same problem, its is not software issue. there are two issues 80% its a lcd cable that is loose at the back of the LCD connector, 20% is the LCD you will need to replace. in the store we have screens to test. also connect HDMI out and it should not flicker.

[@lieutenantdrone6059]

@@uFixTek is it possible that the cause is dust that enter inside under the laptop?? My workstation is kinda dusty every time and i clean it every time.. is it possible that the cause of flickering is dust? Or if not, how to fix the lcd issue??

[@uFixTek]

no its not the dust my friend, 1st test the laptop with HDMI cable with external monitor or with your TV and see if its not flickering (the TV or external monitor). Let me know.

[@lieutenantdrone6059]

@@uFixTek oh thank you very much for the response i will try your suggestion and ive already contacted the service center of my laptop and is ready to pick up for the repair.. thank you again

[@uFixTek]

@@lieutenantdrone6059 oki, awesome i wish you the best and if you have any question ask me in the future.

[@gerardogarza8494]

Great video, can i repaste without unplugging all that is near the fan? Just unplugging the battery and unscrewing the part where I need to repaste

[@uFixTek]

Thank you for your feedback! If you wish to support the channel, you can like, subscribe, or both! Regarding your question, sure you can do my friend , just use a tooth brush to clean the fan and blow air out. and remove the heatsink and repaste. Should you have any further questions or requests in the future, please don't hesitate to ask me.

[@yustincampos3228]

Where could I buy a new fan? I mean a trusted store

[@uFixTek]

Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P regarding your question: here is a good seller were we buy parts sometimes: is.gd/JeuW1V

[@baranucer8233]

@@uFixTek I have a noise problem with the fan I think it's dead. Is that vendor sure ? If yes I'm gonna buy

[@Arran1994]

Thanks man

[@uFixTek]

You are welcome! Glad you liked it 😊Thank you for the feedback! if you wish to support the channel you can LIKE or SUB or both :P if you have any question or request in the future feel free to ask me.