How to Replace 2011 Ford C Max headlight Bulb

[@anneroberts-morgan8567]

Great instructions took me under 10 mins and saved a fortune on garage bills! only needed the hubby to pull the bulb out as my grip is weak lol, diolch yn fawr iawn/thanks very much xx

[@TEAMR4ULTV]

Thanks for watching really appreciate it

[@renatebosompem3715]

Thanks for instructions now I managed to change it on my own car .... so happy 😊

[@TEAMR4ULTV]

Thanks for watching really appreciate it

[@ericcoster3222]

Removing the front screw made the removal trouble free. Good tip.

[@welsh1968]

Fantastic, makes it look easy. Thanks Raul and Phil .😁👍

[@ZeljkoCrni]

And it is for H7 , when you try the H1 will be less easy...

[@MrLeeburt]

Thanks mate would have been all thumbs if it wasn't for this you saved my life!

[@TEAMR4ULTV]

Thanks for watching really appreciate it.

[@EcikSz]

I tried do the same with left reflector and after 20 minutes of fighting gave up.. Now I am looking KZbin for help :o

[@TEAMR4ULTV]

Hopefully you'll get it done

[@EcikSz]

@@TEAMR4ULTV Thanks! Yes, the job is done. The key was the pin above. With a Little help of screwdriver, it "jumped" and I could finally move the reflector up.

[@mikelacey9384]

Nice one -- and no crappy music

[@markmagrath4376]

This video was really helpful, thanks.

[@TEAMR4ULTV]

Thanks for watching really appreciate it

[@simonpurcell8811]

Really clear and understandable...nice job lads

[@TEAMR4ULTV]

Thanks for watching really appreciate.

[@bbq4851]

Great video. Thanks for your help!

[@TEAMR4ULTV]

Thanks for watching really appreciate it

[@BulletTheory05]

Great video. Thank you. Is it best to change them as a pair or just when one goes?

[@TEAMR4ULTV]

I would say change the as a pair

[@yannramsay]

Superb video! Cheers

[@richardsavage7289]

Made the job easy. Thanks.

[@MW-ms8un]

Thank you, great help 👍

[@mpt12345]

Thanks for making and posting this video! Good luck!

[@00wei67]

Very thorough bro

[@AnthonyFrancisJones]

Brilliant - thanks - just what I needed to know!

[@thebudgethobbyist5307]

Very helpful. Thank you

[@dashcamvienne]

I apologize, I do not fluent in english. Is it possible to remove window from car headlight to clean inside. if it is, how can I proceed? Thank you for your help

[@TEAMR4ULTV]

I dont think you remove it

[@patreeko29]

Thanks for the instruction!

[@paulwoolnough3770]

Cheers, you're a star.

[@michaelhazell8321]

👌 superb A1

[@kaiserm-a-x-x5937]

Top man thanks 😊

[@k6fgj]

Thanks for this , it was very helpful👍😃

[@KendalSmithy]

Brilliant. And could you also access the foglamp when you'd removed the headlamp unit? I replaced my two foglamps with DRL LEDs today from underneath today and the nearside one was virtually impossible, but I got there eventually. It might have been much easier to do it from above if I'd known how easy it would be to remove the headlamp unit.

[@TEAMR4ULTV]

Am pretty sure you have to do them from the bottom

[@TEAMR4ULTV]

But have a look and maybe you can access them via the top

[@KendalSmithy]

@@TEAMR4ULTV I've now checked this and, once you get the hang of removing the headlight, the foglight is easily visible and accessible from above. I would recommend this method for the nearside (UK - or left hand side as viewed by the driver) fitting, but for the offside (UK driver's side) it's probably easier to access from below because the washer bottle makes it difficult to get your hand down through the gap even though the foglight is quite visible.

[@torkemadaobelia]

What about the right headlight ?

[@rayok123]

Excellent thank you. Spot on.

[@Spare14All]

Very helpful 👌 Thanks

[@marcmelaye5452]

Thank you very much !

[@TEAMR4ULTV]

Your welcome, thanks for watching really appreciate it

[@bezza4271]

Good video thanks a lot.

[@turkayyldz7079]

thanks bro👏👌

[@TEAMR4ULTV]

Thanks for watching really appreciate it

[@stevetaylor8698]

You don't actually have to remove the 10mm nut out of the trim, with care you can remove the lamp cluster without disturbing the trim.

[@Jay-jay12345]

Thank you

[@WELLBRAN]

good video thanks

[@jimbarrett7614]

Thanks for that

[@TEAMR4ULTV]

Your welcome. Thanks for watching really appreciate it.

[@reikow.2015]

Thanks

[@trithemius56]

I REMOVED TWO SCREWS AND UNFORTUNATELY THE LAMP IS STICKLY STICKED TO THE TOP. I CAN'T TAKE IT OUT.

[@Arichtofen]

Thank you

[@TEAMR4ULTV]

Thanks for watching really appreciate it

[@vukojeivanovic8761]

thanks

[@TEAMR4ULTV]

Thanks for watching really appreciate it