HOW TO REPLACE A CHAINSAW SPROCKET

Stihl ms192 sprocket amzn.to/3ngJdum
Stihl ma192 piston stop riverdaletool.com/stihl-0000-...
In today’s video we are going to be replacing the sprocket on a stihl ms192t And also repairing the bar cover where someone installed it incorrectly #stihl #Chainsaw#smallenginerepair 

[@njjo1]

I fixed up a 041 farm boss and spent way too long figuring out how to take the sprocket off. First video that actually shows how and why to stop the piston. Many thanks!

[@Rein_Ciarfella]

First time I’ve heard that method of tensioning the chain. Going in I thought, “I’m not gonna learn anything - I already know how to replace a sprocket “. I was wrong. Learned a couple things at least. Thanks!👍👍

[@haneyoakie14]

Learning good stuff every video. I have a Stihl 028 Wood Boss I was gifted that needs attention. Now I am not totally blind how to approach it.

[@nashguy207]

Thanks for sharing buddy. We have a ms-192t and every one always grabs it first. I love that saw it so light and has good power for its size.

[@adnacraigo6590]

You have had a lot of training and experience. Thank you for sharing it with us.

[@robertkeaney7047]

59 years old and still learning 👍

[@Mule-shoe]

Very helpful. Made me feel stupid, but I see the light now. Good video for a diy-er old at home like me.

[@jessemalone8363]

Be careful if you use that skinny piston stop to remove the clutch, they have a habit of breaking if the clutch is over tightened or if it’s installed slightly wrong in the cylinder. Great video👍🏼.

[@THEMOWERMEDIC1]

First I’ve heard of this. Thanks for the tip

[@Rein_Ciarfella]

Running that saw I could see the bar oil spray even though I was thinking it sounded really dry. Then you showed us the sprocket. Bingo!

[@Rein_Ciarfella]

“You gonna have a baaad day”. 😂

[@hornedone696]

Thankyou so much I was wondering how to get that thing off

[@Jamwcjconn]

Nice , never knew about the chain adjustment, ThankYou

[@onsight2822]

Great video very informative and clear to understand 👍

[@joeortiz3455]

Thank you sir ,that was an awesome lesson as always, i like that 3 drag rule for the chain ,I've always done the snap technique, I will be doing the 3-drag from now on much faster!

[@themowerman]

Good job me old Mucker

[@Rein_Ciarfella]

J, I thought that saw was gonna poke yer eye out, dude! 😉

[@THEMOWERMEDIC1]

How ? I missed that

[@Rein_Ciarfella]

THEMOWERMEDIC1 In the intro with the little saw picture you pasted over the video where you’re explaining what’s wrong with the saw. :30 seconds in. 😂

[@adamdorris4081]

I can't believe you touched the chain while that thing was running regardless the worn sprocket making it bind or the chain brake being on then disengaging it. Sorry bud but THAT'S CRAZY.

[@THEMOWERMEDIC1]

Thanks for your concern. Do you mow grass? What’s keeping the blade from coming off and slicing a foot off at the ankle? Seen it more than once

[@nilolee2426]

Do you have any video for homelite UT10910 chainsaw , mine cuts off on full trottle and the blade stop turning on pressure too. And also the gas push valve plastic is cracked. I don’t know if I need special tool to remove the sprocket.

[@terrymccorkle1674]

Mine acted just like that one was. I guess after 45 years old it was time too replace the sprocket.

[@tS-ro1lm]

Is there a way to convert a ms291 so it takes a ms 290 chain

[@do-it-right5169]

Nice video mate. Hey Jeremy do u know Raileys small engines. Check him out. Raileys small engines

[@THEMOWERMEDIC1]

Yup I follow him yt and tt

[@dberar55]

So another good video. Off topic though, my Stihl BR550 back pack blower quit running last week. Took it in my shop and checked spark first. Checked air gap, disconnected kill switch wire and no spark. Got new coil today and installed. Using my cordless drill to crank over. At a low speed still no spark. cranking at a high speed strong spark. Am i missing something? I put the shroud and starting rope back on and cranked, nothing.

[@THEMOWERMEDIC1]

OEM coil?

[@Rein_Ciarfella]

Swap out a known good plug?

[@jessemalone8363]

Rust on the flywheel or bolts for coil?

[@Rein_Ciarfella]

Jesse Malone Maybe all the grounding surfaces of the coil or maybe it’s just no damn good. It happens, right?

[@Rein_Ciarfella]

Here’s what’s been bothering me the last week or so. There’s so many videos out there showing how to use a spark tester and how to test the resistance of coils and plugs, but I have yet to see any information on measuring the actual voltage with a DVOM. Isn’t that really the definitive assessment of coil and plug performance after all? Inquiring minds want to know! Also, what voltage range is good?

[@NotALot-xm6gz]

That saw is plumb wore out.

[@THEMOWERMEDIC1]

They get used that’s for sure