How To Replace A Deck Spindle On Craftsman/Husqvarna Mowers with Taryl

[@budsodalsky]

Murray too! Love the blues. Looks like good times in podunk!

[@anotherwaytodoit4279]

I don't care if this video is 5 1/2 years old it solved my problem in 2021. Thanks Taryl. You da man!

[@croth0322]

Make that 2022

[@chippergarcia7473]

@@croth0322 make that a few days from 2023

[@davekulberg3215]

I watch your videos even when I don't have to replace stuff . Your videos are great!

[@spikeleestree8015]

Best repair channel on earth or Mars for that matter. I've been fixin tractors n mowers since growing up on the farm back home 30 yrs ago n I have gotten involved in repairing and flipping mowers often for 4 yrs now. I enjoy it and have made enough money to pay for my daughters nursing school for most part. People have come to know me and work has increased for me since inflation hit n people cant afford new tractors. I work cheap save people lots of money and produce quality like new tractors. Sold at least 40 of em. All started when my old snapper sr1433 was getting really old and couldnt find parts to repair the transmission anymore.I had the idea of buying a used tractor rebuilding it n earning money to get the tractor I wanted for the house. Started w 2 craftsman lt1000s I got for 100 bucks. Sold em both fir 650 after spending 100 in parts. Sold em in less than 4 days. Now I've got a full shop n people rely on me and I love to make my customers happy n save em lots of cash

[@yellowannie22]

thank you, you all are the only ones who have given options and the downfall to just about every situation in between. you answered alll my questions. I am grateful

[@TarylFixesAll]

frany alva thanks! Please thumbs up our videos and subscribe if you haven't already!

[@billmalec]

15 years. Still have the stock spindles. Cub 2554. Being able to shoot grease in them keeps them going. Good stuff as always.

[@DavidMartinez-uz2vf]

I always admire these videos. Helped me a lot with my mower. Keep up the great work

[@donbower2438]

excellent video, being on a fixed income this video ( and other taryl videos) helped this old man keep his craftsman mower mowing the yard... THANK YOU taryl you are the man, just wish I could meet you to let you know how you save many of us agony and undo hair pulling, (what little I have left) thanks again

[@MrRtwilson]

Absolutely the best video for replacing the bearings. You told me everything. Thanks.

[@randyelviss4801]

Gotta love it Taryl, you do it with style and expertise and always entertain! Love you up here in British Columbia.

[@TarylFixesAll]

+Randy Elviss Thanks Randy!!

[@TarylFixesAll]

Thanks Keep watchin!

[@caratcranker5874]

Once again, your choice in clothing here was brilliant! hard to crouch down too by the look of it..haha.

[@TheOnly1john]

It aint space shuttle its lawn mower. My fav quote from Taryl.

[@yowzaabner4314]

the idea using the center punch/Loctite is what I am going to do on my JD 212 mower deck to try and salvage the hub. thank you, chuck

[@MajorHorstPower]

I love how you actually repair stuff and don't just replace with new. Pure gold Taryl!

[@TarylFixesAll]

+Dave Horst Thanks Dave!

[@furnacedoctor]

You guys hit that one out of the park :-) Great job from the east coast !!!

[@TarylFixesAll]

+furnacedoctor Hey Thanks!

[@lachlanjosiah4188]

Instablaster

[@jtreedog409]

my new all time favorite taryl video

[@Ryan318l]

Loved the song. 😂😂😂😂 I had a bad day but this made me feel better

[@Josh-Walther]

Thank you so much, Taryl! To save some money, I was trying to fix my riding mower myself rather than send it to Sears. You gave me the exact information I needed to replace the mandrel housing that had broken; I see my other mandrel housing needs replacement too because it is cracked at 2 of the 4 bolts. I'll order that part and replace it in the near future. So rather than spend hundreds of dollars, I bought an $18 part, put in about an hour of my time (took me longer than you because I don't have a lot of experience with fixing mowers, and I don't have an impact so did it by hand), and saved some money; thanks again!

[@emc2377]

Taryl, you just saved me a bunch of time and headache. Glad I found your vid before I broke anything that wasn't already broke.

[@captainrick01]

Bloody awesome work fellas! "Lawn Mower Shop Blues" my favorite song at the moment.

[@Crlpope]

Thanks this will help me out to replace the shot spindle on my Craftsman lawn mower. Again thanks you are a great help to a lot of people like me the can't afford to hire it fixed!

[@keithevans9785]

Taryl your repair vidios are the best on youtube !

[@croth0322]

Thank you thank you thank you replaced the spindle for 15 bucks the star pattern was completely worn away. Love your videos.

[@star978]

Had the same exact problem on my Ariens (made by Husqvarna) and this video was a lifesaver. Works good as new now.

[@johncollins8304]

Brilliant. Especially everything. Years of learning distilled into one sweet lesson.

[@janfrench8813]

Moves like Jagger !!! Love it

[@davianson7106]

You totally ROCK!! THANKS for this video. I was able to change the bearings blades and belt on my mower deck with no problem because of your video. I saw other videos but they didn't have you draw the bottom bearing in like you did. Again thanks!

[@mmbengs]

Another expert and entertaining vid Taryl! You da man. Keep the lawn mower blues coming👍

[@chejohnny3706]

forgot about the Timber. I think the ''Grass Rats'' need to go on tour. Maybe at the next green expo in KY

[@billhendrickson5506]

I have had success in packing my mower deck bearings with Lucas sticky red grease.

[@williamamos1716]

Absolutely Loved This Video! Just the right amount of crazy + blues + lawnmower repair = Fun! Thanks Guys.😷👍 Good Times.

[@muugatest]

3 years ago i just replaced the 4 bearings ,reused everything else and installed grease fittings on the mandrels, still cutting good. i got a kick out of the microphone :)

[@TarylFixesAll]

+muugatest Testicles, Testicles, 1-2-3!

[@libertyforamericanow]

Did you pull the bearing seal?

[@jimwesbrooks4744]

Wish I had seen this years ago I replaced 2 of these and your method would have saved me $$ and time

[@garysgarage3669]

I see the friction material is worn off the blade brakes. What I did on mine is, I cut a piece off a old brake pad from a car to fit and welded it on the leaver. Worked great. Love your videos

[@anthonymarks120]

You guys could make a hell of a band !!!!!!

[@7A7ER]

Had no idea you could part out a Spindle. Thanks Taryl!

[@braddyer7602]

You're the greatest Taryl

[@wolfmceuen7068]

You're the man! Your videos have helped me with two issues!

[@4gauge10]

I didn't know slippers could play electric 🎸 guitar like that Tayrl,you guys need to make a few music videos.TOP NOTCH VIDEO!!.OUTSTANDING!!.

[@edquier40]

The man knows his hammer, A-1 Hammer Mechanic and bailing wire master!

[@72plyduster1]

Have you ever taken the inner seals out and added a grease fitting to the body so it is now areas able spindle? I have done that and worked good never had to replace bearings.

[@brealguitarguy762]

Thanks Taryl, you da Man. Fix it don't trash it

[@h.i.mcdunnough9401]

That's a great video Taryl!

[@kennetjwettstein7895]

Merry Christmas to you and your family

[@MultiChainsaw123]

great video love your music

[@TarylFixesAll]

+MultiChainsaw123 Thanks for the kind words!

[@TarylFixesAll]

MultiChainsaw123 music is now available on CD from us! Be sure to grab a copy! Now There’s Yur Dinner!!

[@garrykrause2375]

I LEARNED HOW TO DO THAT JOB TO--THANK YOU TARYL..

[@arborymastersllc.9368]

Solved my problem 2023. Way to go.

[@cs-vf2de]

what do you think about some people installing a dirk fitting, does it work?

[@johnypc2008]

Thanks Taryl that helped a lot as about to do my own.

[@JOEZEP54]

How did I miss this one??? Too funny. Stay well, Joe Z

[@TheCompound01]

What were some of the aftermarket names you have. And can you tell me why craftsman decks rust out so fast. Thanks again. You give the most informative videos, I've seen on you tube.

[@dandydonslife9869]

Really great explanation, thanks for sharing.

[@williamcampbell9513]

Great video as always. Saved me time, money, and a lot of cussing.

[@billypreston12]

LMAO! A great mechanic and great comedy skits, you guys cover it all!!

[@richardramsey4828]

Thank you Man, you were a GREAT help, Love your Music. You are an AWESOME DUDE, and you really know your stuff. Thanks again, God Bless! R. Ramsey Middle Tennessee

[@danieljensen2427]

hi Taryl, or anyone should a pto be sprayed with penetrant? nice video on the spindles. * note put small bearing on first.

[@Candoit2]

Excellent video! Lots of good ideas, THANK YOU VERY MUCH!!

[@roynelson7613]

I would love to see you guys do another intro video like this I watch all your videos one right after another you guys are super cool man👍🏽👍🏽👍🏽👍🏽💯👊🏽

[@rverro8478]

Taryl ! While putting the spindles together, I packed the housings with grease because 2 out of 3 spindles on the old NOMA don't have a zerk fitting. Was that a good or a bad move ?

[@Nudnik1]

Good advice he says. Use shaft to pull bearing in never hammer on inner race since impact can shatter outter race or damage balls in bearing. Always tap on outter race use a soft brass or aluminum hammer .

[@thersten]

I liked the song! And your video is amazing. as usual

[@jonlambshead5115]

Great Video , What are Your Thoughts Taryl On Greasing Spindles ? It Is A Waste of Grease If You Fill The Cavity With Grease and Have The Inner Bearing Seals in Place. You Are Putting Excessive Pressure on the bearings. You Should Take out The Inner Bearing Caps ( Pastic Covers ) Out Then Place The Shaft ETC Back Together In The Spindle, Then Grease Them . Best To Have a Very Small Weep Hole on The Outside of The Spindle, so The excess Grease Can Come out.

[@IconMaintenance]

Does Stens, Rotary or Oregon offer a spindle with bearings kit for an older Husqvarna IZ-4818? I can find the part # for the OEM spindle & bearings, but not for a kit. Thank you.

[@harryharry3193]

MANNNNNN thats a NICE shirt.

[@earlholcomb9393]

Thanks for your video my friend has a Craftsman tractor and we maybe get in contact with your website or extra aftermarket stuff for that particular tractor

[@leeworley9779]

Awesome video 🇺🇸

[@kennethconnors5316]

loved this one... GrassRats class!

[@exterminator1]

Need more mower songs lol. fantastic video.hope to see you at gie this year

[@01dooman]

Taryl : have you any information on the 1050 series bolens transaxle ?

[@deanjones5677]

have you got a release date for the cd

[@johnbrisker5584]

way to rock it Mr dactyl!!!!😎🤘 i work on mowers and iam still learning from watching the show. keep it up you and the boys👍🍻

[@marcroche9324]

Taryl I have a 2012 Crapsman YT3000 mower 42-inch deck the blades always seem to be a little stiff when turned by hand during inspection. I've been running this thing for a few years the deck spins up OK, but it's weird that the spindles seem stiff. any comments? Thanks.

[@dhsw41800]

How do you remove the nut off the top of the spindle and pulley without an air impact tool? I cannot find a way to keep the pulley from turning when trying to loosen the nut.

[@jamesrooney7689]

thank you thats my next project your the best

[@garywright2646]

Are you any relation of Harry High Pants ? Love your videos.

[@benjaminunderwood12]

m ? and this has nothing to with tish but you are fun and grate..i have generac 27hr that has been discontinued and need and float Needle for it cam you help me out. it seems to me that you the smartest man on KZbin

[@mikeokizichy]

Hi, I have a Ford LT11, mid 1980's. The deck spindle pulley has the 3 bolts on top. Do you know if the bearings can be replaced? I thought the top might be threaded on but it won't loosen off. Thanks

[@TarylFixesAll]

Unless the pulley or blade hub is welded on the spindle should come apart.

[@larrylagoon6405]

wish you guys were in RI

[@superunknown8645]

Was that a fender telecaster slippers was playing

[@If_Only_I_Knew_Why]

I ordered three spindle assemblies and one of them arrived with the bottom bearing unseated (they used no packing materials, just products in boxes). When it sets in the housing (without reseating it) it sets in lower than the other two, which makes me worry about blade hitting the housing... The bearing is also pretty tight on the spindle shaft. Should I return/replace?

[@Glass_Of_Tea]

How much torque should I put on that spindle pulley nut?

[@theeabster1983]

It look like them bearings were sealed a lot of these spindles come with a grease fitting should you pump grease and fill that whole entire shaft up or is it not worth it?

[@teamtraderusa]

Are you suppose to grease the spindle? When I took the old shaft out it didnt look like there was any grease in it. My new spindle has a grease fitting.

[@shankarjadoo]

Beautiful, love you, sir.

[@mowerrepairshopfortscottkansas]

Good Video I had to replace both spindle on a mower last week for a customer he hit a pipe in the yard

[@fredfly001]

Hitting the threaded shaft with a hammer - great idea

[@TarylFixesAll]

Yep, as you already know, since it’s the old shaft that’s being replaced, it won’t matter or hurt anything.

[@sherylsbsmith9204]

thanks, your video makes it look easy.

[@robertjeffery6100]

Not for nothing you guys make my day😂😂😂😂🤣

[@heavymechanic2]

The grease in my lower bearings was dried up and sounded like a cement mixer. I just put new Asian bearings in there and packed them with wheel bearing grease. Will see how long the china bearings last because there was just a little Vaseline looking grease in the new bearings LOL. Cost me like 10 bucks for two sets of bearings from eBay, used the old shaft (42" LT2000). This job was really easy with an impact gun, a hammer and a piece of rebar.

[@howardparis2409]

what do you think about adding grease zerks to the spindles?

[@TarylFixesAll]

+howard paris You can just remember to remove the inner seal from the new bearings so the little balls will get there greasy nourishment.

[@FINNTVBASSFISHING]

I added a fitting on mine just took out the plastic cover on just one side of the bearing. .. also if u wanted drill a very very small hole in the spindle so the air will leak out

[@william38022]

Taryl youinsguys just have to do more with your band dude,,, really dig it,,,,👍I mean that’s first class all the way......😎pretty cool 😎

[@bluebeast-pv5co]

Taryl, great video. I am almost done with my craftsman LT1000 deck rebuild, at the spindle install but have an issue that I hope you can help with. The new spindles came with washers that go between the pulley and spindle assembly, one side looks lined up (belt wise) but one side appears to be a bit lower than the rest of the pulleys, thinking about getting a second washer for that side to line up the pulleys, does this sound right? Thanks.

[@ApacheNative275]

Someone had put 4 bolt spindles in mine. So when I did the rebuild I put in the same same type 4 bolt spindles.

[@nicolaassnoek9902]

If the bearings are sealed bearings what does the grease nipple do?

[@homeFall1]

I believe I saw in another video's comments from someone who claimed to have been trained to service Craftsman mowers that they wanted grease in the cavity to help keep moisture from setting up against the bearings etc. If I was in that deep I would likely pull the inner seals off the bearings to they could benfit directly from the grease

[@CountryBoyBrian23]

Y'all need to make more songs that was awesome!! And maybe make a cd of some of them or iTunes? Lol great Video

[@JohnStrandt]

Slip-Dogg with the ronka ronka tele... Sweet

[@cgonedfishing]

Can you find these for scrUb Dadets too?

[@joebriggs9599]

Excellent Video the best on youtube.

[@skellym37061]

Now that's funny stuff right there!!!

[@johnstrange6799]

Bravo! You guys kill me!

[@bobmccann2141]

Hey Daryl, I tried to look up parts numbers of Stens, Rotary and Oregon and keep on getting create an account message and or no results? What is the blasted trick? Do I have to give my first born and all the information included to open an account, I only want to search a part for a price???????