How to Replace a Front or Rear Wheel Bearing (Full ASMR)

Bad wheel bearing? Wheel bearing noise? Learn how to replace a wheel bearing in your car or truck. In this video I show you how to replace a front or rear wheel bearing hub assembly. With this wheel bearing replacement you need to remove the axle nut, the brake caliper and rotor, and unbolt the bad wheel hub bearing assembly. It is that simple! I show you how to replace the wheel bearing at home using common hand tools, and this time the video is an ASMR (autonomous sensory meridian response) video with high quality audio!
Tools and Products:
Torque Wrench: amzn.to/3rKi7Ll
Wheel Bearing: advanceautoparts.rt8x.net/Yg9gYj
Slide Hammer (you can rent for free from parts store): amzn.to/2OevxBr
Flex Ratchet: amzn.to/31SvQFv
Threadlocker: amzn.to/3sJnLyl
→ As an Amazon Associate I earn from qualifying purchases.
→ Become a ChrisFix Subscriber: kzbin.info_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix.

[@chrisfix]

For anyone who wants the version where I speak: kzbin.info/www/bejne/nJbCiKeBfrCfj6M

[@kanesvlogs497]

Thank you, good sir!

[@hayitsj21]

You are so considerate.

[@ramasundaribalamuruganandh5632]

noice

[@AManOnline.]

I had to look up wether or not a "wheel bearing" was a real car part lol

[@ramasundaribalamuruganandh5632]

i like ypur videos man

[@zman9093]

Your neighbors were probably like “honey get over here, that kid across the street FINALLY stopped talking to himself!!” 😂😂

[@justliving2601]

Lmaooo

[@chrisfished]

Hahaha

[@davidyusaku]

*stopped talking to his car

[@jayasmrmore3687]

Kid?

[@Wings-over-md]

LMAO 🤣🤣🤣🤣

[@meniver]

my girlfriend gave me a funny look when I suddenly whispered: "out with the old and in with the new". Now she thinks I'm possessed.

[@MobHamp]

😂😂😂😂😂

[@get.hi9h]

🤣🤣🤣

[@misterhoi1876]

In name of Jesus stfu

[@pyromaniac354]

Must think you have a new girl in town.

[@Skraldeposee]

🤣😂🤣😂🤣😂🤣😂😂🤣

[@gc5665]

The fact that you don't use air or cordless impact tools (to make life easier), but just hand tools and breaker bars got my utmost respect.

[@chrisfix]

Thank you! Makes everything take forever but shows millions of people it can get done with common hand tools so to me that’s more important

[@1mawesomel1kethat]

@@chrisfix any updates on the Del Sol or the supercharged Driftstang? Also, this kind of stuff really helps when you are working on a project

[@camf03]

@@1mawesomel1kethat I believe Del Sol content is coming after the BMW LeMons trip, and he has to figure out how to fit a supercharger under the hood of the Driftstang, he said he wants it to look "stock". Hope this helps

[@1mawesomel1kethat]

@@camf03 thank you

[@GladiatorGladiator2023]

@@chrisfix I love your videos

[@Scania0]

I can literally hear your words in my ear after each step: "out with the old one and in with the new!....perfect!" I just love it 😍🤣

[@Echo024]

*ChrisFix’s neighbors:* Honey, the guy who is usually yelling at his cars is completely silent today. I hope he’s alright!

[@Michelle-dy4tu]

LMAO

[@jamesk3565]

I was thinking the same thing 🤣🤣🤣

[@kennethgomez7659]

W comment

[@jasperdomingo2608]

Exactly the opposite now huh🤣

[@armandocifuentes6249]

Lol 😂😂😂

[@SirFrankoman]

I don't even feel pranked. It's really cool hearing the sounds you normally block out; almost like being behind-the-scenes of a real video.

[@demetricklouis5710]

Right!

[@thecreedy]

For some odd reason i loved watching this with sounds being so clear, was actually peaceful 😂

[@ShinLeeChan]

That's why he tagged the video as "Full ASMR"... It's a new trend where you can actually hear only sounds from materials and tools, without any voice / music over it. And guess what? The purpose of these videos is to relax. Gotta admit I was shocked at the start when he didn't open like usual, but it was definitely peaceful to watch. :)

[@Newberntrains]

Never thought a ratchet is so yes

[@henker20yearsago80]

@@ShinLeeChan not really a new trend tho...

[@agentsofthe6ix110]

Ok, so... not "simple", but far more simple than I was expecting this to be. Thank you so much for the tutorial!

[@chrisfix]

Anytime!

[@MegaMicraman]

Simple with the right tools.

[@stvrtoo]

For Chris its simple indeed xD. For the rest of us... its not ALWAYS THAT simple xD.

[@indianboy0453]

One of the greatest things about ChrisFix is that despite the fun gag that goes into April fools, he STILL manages to make them useful and helpful.

[@mrgunaman]

Indian boy are you really Indian?

[@boymcfacto5832]

Yup the piston spring episode was the most useful one so far

[@CallumAtwal]

I think the blinker fluid one was more useful than this 🤔

[@benjaminrobledo5466]

Nah, Muffler Bearings...

[@allistairp4274]

Yea the blinker fluid that I replaced a few years ago is still in today w no leaks thx to ChrisFix!

[@batvon39]

Him whispering in the beginning was still more enthusiastic than the 2015 ChrisFix intro.

[@kostasygaming7409]

Lol i totally agree, the time he started being enthusiastic was when he got the driftstung

[@JesusGonzalez-mj5fn]

Lmao 😂

[@midnightrunner684]

Whispering turned me on a bit for 2 seconds

[@tfr6]

@@kostasygaming7409 no he started being interested when he was getting paid lol

[@NavenPheng]

Fax I member his lawn motorsea foam test

[@midaakhiko1246]

I would be open to him posting two versions of all videos from now on, one where he's his normal high energy self, and other of this. This just feels good to listen to late at night.

[@arizonacolour8793]

too much work for the same result, either one, bud. One or the other

[@redbrosas]

Why is this so calming? The wrenches, the ticking, the clanking of metals, and the swish swish of the soapy wooder..

[@ShinLeeChan]

ASMR videos are like that and that's the purpose. :) This show how Chris is working hard to make his content up to the new trends. Since his videos are so good, I could easily understand all the process without any of his comments about what he was going to do.

[@adams7872]

Not a single word spoken, and still more comprehensible than 70% of diy guides on youtube

[@wholeNwon]

Excellent camera work, lighting and pacing. Doesn't happen by accident.

[@GardenGuy1943]

No, Chris was still talking, did you have volume up??

[@Fidget_exe]

Straight facts

[@Fidget_exe]

@@GardenGuy1943 he barely spoke during most of the disassembly

[@GardenGuy1943]

@@Fidget_exe volume must not be high enough

[@cesarjaramillo1158]

Once you've watched enough chrisfix, you can just hear his voice in your head explaining every step

[@thelegacyshow4248]

Even the "good!" At the end of each step

[@cesarjaramillo1158]

"AND LOOK AT THAT!"

[@iiTs_Arabi]

Ikr

[@FDaihatsu]

M E D I U M S T R E N G T H T H R E A D L O C K E R

[@Blingo.Blongo]

“Alright! Now THAT is what I’m talking about!”

[@saintgtx]

I know this was an April Fool's joke, but for the past year and a half I've been coming back to this video whenever I want to relax, super therapeutic stuff!

[@thelaptopabuser]

bro idk why but i can understand this without even hearing chris's voice

[@hithereperson8137]

Its because you have 6 cores and 12 threads

[@nurijeajdari649]

same

[@RajeshSingh-rt4rx]

Because we watch our car master as our daily routine ❤️

[@ashdamm9007]

This is the most cursed April fools I’ve ever seen. The effort involved! Kudos!

[@chrisfix]

Haha thanks!

[@pakodaaaaaaaa4703]

@@chrisfix please tell me u have a this vid in not asmr form

[@bradbadger3633]

I NEED THE COMMENTARY LOL

[@ViolentMLG]

@@pakodaaaaaaaa4703 I would assume that he could upload it, but.. the asrm version can do lmao

[@egg7244]

That's cap

[@TheStraightPipes]

That soapy wooder hits different

[@DoubleD8056]

Lmfao

[@mclovinbigmacs5948]

So does him not speaking

[@cameronhukari299]

i was waiting for this

[@LucasJ06]

Same👌

[@davidyusaku]

Basically all the lubricant sounds interesting now

[@oliverwatts4705]

The dedication to not just ugga-dugga half these bolts out for the quality of the channel is insane. My progression is usually a breaker bar, to a high-torque impact, to a blowtorch. Can't be tight if it's liquid.

[@DannoM_]

Now I know why I'm paying $1,174 to have both of my rear wheel bearings replaced today. It's a lot of work. Much respect to these skilled mechanics!

[@mercer982]

And this is not even a press in type bearing.

[@balvanovic4]

@@mercer982 mine is and don't have the tools for it 💀

[@Speedster189]

@@mercer982 exactly. He doesn't even know what were talking about but those press in bearings are easily 5 times a harder job than these where they really are skipping that hard part of actually removing the bearing and putting in a new one

[@drew5992]

$1100??? Parts and labor?

[@MrJusduit]

It should be most most $600.00 its alot of work for usf because we not use to it.

[@keesynlaroque834]

The only mechanic in the world who could work on a vehicle and not say a single word or swear. Legend

[@robinrumpfkeil9546]

Most importantly: not even a single swear

[@can13]

I filled all of the words in my head :D

[@DetailxpertsNet1]

AGREE!!!

[@lmfaook.7971]

Amen. Mostly the swearing part!!!

[@Samcrac]

I swear if anyone other than Chrisfix owned this truck up North it would just be a mound of rust by now. I love how you wire brush everything down to the bolts!

[@seancobian8416]

He lives in jersey

[@nikdelano]

I’m pretty sure he knows. I bet he’s implying that he takes such meticulous care of the truck that it isn’t super rusted

[@chrisfished]

Thanks dude!

[@darkwatcher01]

@@chrisfished LMAO

[@rmts271]

hey man hows the ferrari?

[@paulcosby8662]

Imagine how good this guy is at finding camera angles inside of consumer vehicles.

[@uenragedbro]

It brings a tear to my eye to see two of my favorite KZbin worlds come together. I'm a technician at a dealership and I don't think I would've had the love for cars or tools without you, so thank you for that. It also makes me elated to see the positivity and love for you in the comments.

[@dingus153]

"Marge the neighbour kid is being even weirder today, he's fixing his car in total silence"

[@volvo09]

"I think he's sad today, he's not as loud and excited"

[@benbarrett4915]

@@volvo09 😂😂😂listening to the kid laroi😂

[@christiandeleo7737]

I can tell you he was swearing a lot during that process.. 😂😂😂 we usually don't see that in the videos I guess ♥️

[@jaxonjai8447]

*The steering turns* Me: "You wanna work with the car, not against it" Girlfriend: "why are you whispering?" Me: "Shhhh"

[@chrisfix]

Hahaha yessss

[@jaxonjai8447]

@@chrisfix OMG HE REPLIED! I mean, my girlfriend thinks I'm possessed now but I got a heart & a reply 🤩

[@Nobody-uo8lu]

Hahahaha nice joke

[@nickmartinez5644]

Oof 2 hearts lmao

[@prawncocktailcrisps1402]

@@chrisfix Yh Chris want one billion dollar no joke I rich no scam

[@stevewoods8116]

12:00 I cannot believe how you did that painting with out getting it on the new wheel bearing!!!! Hats Off To You!!! BEST

[@cypresscustoms]

Been wrenching on car for 30 years, listening to this video and closing my eyes brings me back to so many driveway projects. Crazy flood of memories!

[@xXFuZeSnipeZzXx]

Was starting to get worried Chris. I knew you wouldn’t dissapoint us!

[@chrisfix]

Anything for you guys!

[@rly.shiesty]

@@chrisfix lol

[@uzi.e46ix]

@@chrisfix love you

[@rifkyfahrana1141]

@@chrisfix thank you 🙏

[@Xanadu245]

@@chrisfix lol, so how many takes did it take to avoid your neighbor(s) running something kind of outdoor power equipment?

[@amargill4819]

Been waiting all day It feels so weird not hearing him yell into the camera

[@SE45CX]

I like the no-yelling approach.

[@atarvhegde5210]

Exactly. I prefer the yelling approach though.

[@Gizmo1992]

Thank you Chris I did my brother's bearing yesterday on his seat Leon and watching a couple of your videos on bearings I managed to complete it myself. I've done a few things on my own car by watching you at work I just wanted to show my appreciation and say thank you for showing us how to go about stuff. I like telling people when things go wrong it's okay I'll fix it and for the most part it's your videos that make it possible, I even followed you to the point of cleaning the brake dust guard etc

[@RealMichaelScott214]

Hey Chris you made me buy whole tools to repair my car by my own. Its one time spend and its also worth it. that would be great to do more ASMR car repairs. that feels great when I'm doing it on my backyard in complete silence. Thanks for whatever you did in past years and helping community to be more knowledge about car problems and how easy it is to fix cars without paying the Big mechanic guy on your local. keep up the great job and god bless you.

[@JollyRogerHobbies]

I always like how ChrisFix does an April Fool's day, Christmas, and other holiday videos. Plus he does them so well, and you can still learn from them. Thanks for the hard work ChrisFix!

[@crabtreemedia8169]

Don't forget about the piston return springs😂

[@TVideoupload]

Always useful to know how to change your blinker fluid!

[@BastienHTSE]

And change your muffler bearing, when it make some noise !

[@Sir_Lcn]

It's kinda weird because in my country is april 2

[@proghostzgamecreed6555]

I just installed a fart filter. It works great...

[@falxonPSN]

A clear, instructive video with no talking? Teaching level achieved: Ancient Sage.

[@attarguitar2991]

I WANT MORE OF THIS! It's so good to listen to as you work. More please!!

[@Orgalorgx3]

I just found this channel recently, but. WHAT CANT THIS GUY DO! JACK OF ALL TRADES!

[@KirbyMobile1]

People: you cant just make a repair tutorial video with almost no speaking and expect people to understand Chris: observe

[@jappesp97]

I just heard his voice all the time in my head like "grab a breaker bar" "add some medium strength tread-locker and torque them down to the right spec.

[@rasmusstigaard8974]

I think you mean “hold my soapy wooder”

[@esatd34]

@@jappesp97 Thats what happens when some effective speaker speaks. Words are inscribed into your head.

[@miken8150]

Oh yeah? Mr Subaru did it for years...he speaks now but his old vids were like this.

[@TheCUTTERbyPHOENIX]

i think you mean : "ChrisFix : JUST watch !!"

[@chrislopez4942]

Chrisfix has gotten so good at making instructional videos that he doesn’t need to talk and you understand everything and are ready to do it yourself

[@Treylopez1997]

I liked yr comment then I saw yr last name lol

[@lukeslayer]

I reckon it's actually easier cause your brain doesn't have to concentrate on trying to remember the names of the parts you're interacting with so you can just following along at your own pace visually.

[@Treylopez1997]

@@lukeslayer ya that makes sense

[@scottelia8723]

Agreed

[@Svakhen]

I was going over every step in my head as he did it. He has done something magical.

[@MitchyIce7]

Holy smokes, I just replaced my front right wheel bearing in the cold and dark out of necessity. Thank you for existing Chris! Couldn’t have dreamed of doing this ever without you

[@morgan5630]

@ChrisFix A very useful tip for cleaning smaller bolts: insert them into the chuck of any electric drill, apply some oil, and then hold a wire brush against the threads, or fine sandpaper around the shank. Just a sweet tip for those without that awesome machine you had for the bolts.

[@canigetahoooyyyaaaaa7319]

Great idea :)

[@jeffumbach]

Your drill must have a really big chuck if it can accommodate 14mm hex heads.

[@BradleyRichards]

ChrisFix has truly made April Fool's a holiday for me

[@illuminerd3757]

yeah, he went through all the joke products

[@seanconnelly2832]

Haha ya defo Love the channel it’s crazy to think me and Chris are the same age

[@nchondakid]

@@illuminerd3757 Holy hell your username goes across my entire screen lmao

[@creeperstomp2727]

⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻ how do you make your username that long

[@BradleyRichards]

@@creeperstomp2727 idk

[@suraj-ram7488]

"Honey the helmet man has stopped talking to his car!"

[@ricigri1242]

"I wonder why suddenly the silent treatment"... xD ahah

[@christiandeleo7737]

You meant the Stig from Top Gear 😂😂😂😂 tool Stiggg 😂😂

[@TCJD2024]

Now this, is the asmr ive been needing, im a car guy myself and this is just perfection 😌 nothing quite like some good o'l ratchet sounds

[@sicklebro]

I’m so used to hearing Chris whisper sweet knowledge into my ears that it’s almost uncomfortable to not here his excited voice lol.

[@pinkmountain2587]

even though hes not talking, i can just hear him talking about what we need to do in each step

[@Bobewel]

Same

[@eliprieto154]

Same

[@momenj8881]

Haha

[@jonathangalya9817]

same, i loved it though. great to do here and there

[@jonasltu2474]

Yes

[@coastaku1954]

This isn't even a prank, this is actually satisfying. Especially the Torque Wrench clicks.... Gives me the shivers... Good ones

[@itsdokko2990]

them clicks are pure eargasm

[@coastaku1954]

@@itsdokko2990 Learning how to fix cars in high school, the Torque Wrench was always my favourite tool for that specific reason

[@relansis6962]

@@coastaku1954 in which highschool's they teach u how to fix cars?😳

[@coastaku1954]

@@relansis6962 Many High Schools in Canada have Auto Shop programs. Mine specialized in Trades so my school’s shops were much more machined

[@relansis6962]

@@coastaku1954 here in NYC is hard to find one 😭

[@Zaltic]

The only person who makes fixing cars relaxing

[@aminotarobot7486]

unironically one of the best ASMR videos out there

[@joealex65]

A real video from ChrisFix on April's Fools day? That's not right! 😂😂

[@arun-zx4mu]

Ik it not right

[@lucasolivo2785]

Ikr?

[@prashantnaidu5235]

It's full same tho

[@Greenbearls]

I came to the comments section before I even watch the video.

[@hxmzix]

Lol Yeah

[@TheDarkruney]

Is it just me or could you still hear him even tho he didn’t talk like in the back of your mind

[@InternationalKarl]

Hate hate hate hate hate the silent videos!! What makes your channel great is your energy and explaining

[@chrisfix]

That's why it was the April Fools video :p

[@InternationalKarl]

@@chrisfix sorry missed that part! Lmaoooo got me

[@Mathew2009]

I’m writing this in my sleep because it was so relaxing 😌

[@KrisPBacon]

Imagine walking out one day just to see Chris fix fixing his car in silence? I'd think i went deaf!

[@Fisher1903]

Would have been a great April fools video to just not include any audio hehe. I would be blaming youtube for being broken

[@RandallStephens915]

I’d be more concerned walking out and seeing someone working on their car with a racing helmet on.

[@JerrsAerialPhotographyVlogs]

@@Fisher1903I would be thinking my speakers was broken!

[@AAP0000]

I thought there was something wrong with the sound. He has a really nice voice.

[@austingeorge6659]

What you don't know, is this took 2 to 3 days to edit. We appreciate the hard work!

[@pepperjack9253]

Yup hard work pays off

[@japjotgaming899]

@@pepperjack9253 true

[@abdullahtauqeer8353]

True

[@barnsleyseemstobeaninteres7698]

True

[@lindokuhlemdlalose9723]

What a therapeutic video 😂🤌🏾🔥

[@mikeevans6910]

Dude, I can not tell you how much I appreciate and enjoy your videos. Thank you so much, it has helped me tremendously.

[@KushKushBlaze420]

It just isn't the same without the "Out with the old, and in with the new"

[@SkateClipsAndTips]

I read this in his voice

[@fly_bouncy7808]

I did the same thing

[@sanaaaboulhosn]

@@SkateClipsAndTips me too

[@jerbus7956]

I feel as if Chris made the video then uploaded it without realizing he never overdubbed it. “Ah screw it, it’s an ASMR video now.”

[@sylvezar3881]

he whispered in the beginning though

[@whitegoodman7465]

@@sylvezar3881 neighbors were sleeping

[@chrislopez4942]

@@sylvezar3881 wouldn’t be a chrisfix video if he didn’t say his iconic line.

[@ronpalmer1371]

What’s ASMR mean ?

[@Crash99800]

Or it was for April fools

[@SickestDisciple]

The “soapy wooder” whisper was my fav part lol

[@jonathancouch7349]

That's what I want to learn to do disc,drum brakes and wheel hub assembly

[@jorgenvonstrangle000]

When he said “and to clean this off let’s use S O A P Y W A T E R” i felt that

[@rony-g]

S O A P Y W O O D E R*

[@youssefragui522]

Lol

[@jorgenvonstrangle000]

@@rony-g soapy water

[@duncanbennett2898]

This is just like when I replace bits on my car, except with 8000% less swearing.

[@Whatchamawhozit]

Chris probably was just remixed the sound so we did not hear him say Mother F***ker I was not asking (when the homemade breaker bar came out)

[@lpeter5781]

I didn’t know car repairs could be done with out cussing

[@nathancole8188]

@@lpeter5781 gotta get a good knuckle bash and a loud f@%# in at least once with every repair or it ain't done right. That's how my repairs seem to go at least. Lol.

[@bubbatennessee7531]

The bearing hub assemblies are so much easier to replace than the old-fasioned pressed-in bearings. Wish my 03 MPV had this type.

[@DylanRuss-wf1pm]

Having to tell myself what was happening for each step really helped to drive home what you taught in the commentated wheel bearing videos.

[@RoboCarrion]

Chrisfix is so good that even when he doesnt talk I still understand what he's doing

[@macmurfy2jka]

The mark of a good videographer, no sound needed. The shot composition and action will tell the story; sound just adds extra texture.

[@_DlME]

Facts

[@everydaya.lleshanaku1127]

everyone probably imagined the "OUT WITH THE OLD AND IN WITH THE NEW" its a classic

[@rainxer9561]

I cannot get that shit out of my head, it's just there everytime, even if he don't say anything

[@pjwoo276]

It's real good to show comparison of before and after noise. I find that so important in most all instances. The only other way to know would be from experience, which I don't have.

[@Countryboy316]

A Chris fix video in all languages. I got a humming noise on my focus. Jacked it up, and it's the right side. Thanks for the video. I feel confident enough to replace it.

[@chrisfix]

Awesome! Let me know how it goes!

[@electrifiedpickle8652]

Honestly, the video may be cursed, but its still more useful than 90% of the others out there. Well done

[@chrisfix]

Lol thanks!

[@bomenorange.]

I was totally not ready for the regular loud “Hey Guys ChrisFix is Here” at 7 in the morning. How nice of him to take that in consideration and be so quiet and gentle today.

[@mariasima2319]

So why isnt he tallking

[@mariasima2319]

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

[@6erronjx]

@@mariasima2319 becausd this is asmr edition only sound of tools and parts

[@bomenorange.]

@@6erronjx nah, i would like to think that he did it for me ☺️

[@julios.8116]

THANK YOU CHRIS FOR YOUR VIDEOS. I HAVE LEARN SOO MUCH, AND BECAUSE OF YOUR VIDEOS, I FIX MY CAR MYSELF. ITS SCARY AT FIRST THEN ITS EASY. I HOPR YOU KEEP IT UP WITH MORE TUTORIAL VIDEOS..

[@Rickbearcat]

Wow, loved the edits and filming in this video. You're getting some real skills at this stuff!

[@AkiFrictionz]

Gf: He’s probably cheating on me Me: *why do i hear his voice in my head*

[@makeupmonsterGAGA]

I don't get it

[@AkiFrictionz]

@@makeupmonsterGAGA watching the asmr vid i hear his every step of each thing he’s doing

[@TheCUTTERbyPHOENIX]

@@makeupmonsterGAGA it's also a meme

[@jonrios1389]

I know this is suppose to be a joke video but honestly it was really good he should make this a regular series where he just fixes clients vehicles ASMR style 10/10 would recommend

[@Kraken_Meister]

Doing all 4 hub assemblies on a subaru took around 8 hours, then again I didn't have proper tools for the job haha! Nice video, saw some good tricks in there. One word of advice to people doing this, also replace your brakes at the same time. 2 for 1 job!

[@Puggy42069]

Please do more of this! You have a nice soft spoken and whisper voice with excellent attention to detail. The only thing I would change is to lower the hammer and banging sounds significantly.

[@jzn8925]

I like April Fools just because its basically a guaranteed ChrisFix video haha

[@lowkeycraig9330]

Exactly !!

[@spideym35i]

I never thought of it that way🤔

[@yungboicontigo9278]

Blinker fluid gangggggg

[@abdullahtauqeer8353]

@@lowkeycraig9330 yup bro

[@abdullahtauqeer8353]

Yeah chris

[@Haru-gw8nv]

This is the only man in the world who can make something as loud as a car seem relaxing and quiet

[@SDKwarrior]

props to Chris for this very high quality video. if i tried to make this all you would mostly hear is me breathing

[@TheRynojp]

Gotta say, I love Chrisfix's videos and recommend the channel to everyone I know, but the older video where he talks you through what he is doing is 1,000 times easier to watch than this one.

[@chrisfix]

This is an April fools ASMR video.

[@ibrahimfares1308]

i’m not used to the “hey guys chris fix here” being so quiet

[@chrisfix]

Me neither lol

[@Gliw0306]

@@chrisfix what

[@ppatienxe8838]

@@chrisfix what

[@s60rchase17]

it scares me

[@DiaperSNiFFER]

@@chrisfix are wheel bearings different designs vs FWD, AWD, and RWD?

[@JudeTheDood]

I’m unsettled at the fact that ChrisFix didn’t talk during this video (besides the whispering lol)

[@rubenb6943]

Wow, wow, wow .. this is not Chris fix . Since when he isn’t speaking out every step on ? One of the reason I like Chris fix and a very important one is !!! He always explains very well and clear. There are only very few that shows videos like him !!! Oh well if he is really him he must have his own reasons … Chris fix it’s a very good KZbinr out there !!!

[@chrisfix]

That's why this was an April fools joke :p

[@HYPER_EVAN]

It's just so satisfying. Did not know fixing cars can be this enjoyable :)

[@danielbell27]

ain't gonna lie. this is one of my favorite ChrisFix videos

[@chrisfix]

I'm glad this is one of your favorite videos!

[@garystrat999]

@@chrisfix lol not because you’re not talking imo but because you basically just did all that no talking . Lots of people should do that .sometimes people talk too much but great video one of my favs too but I like you talking better

[@nyxmarenightmare7274]

If every class was as detailed as this and didnt even need a word, i would go to class everyday

[@amogh6270]

Ikr

[@n.gr.4879]

Hi Chris, Rick Hendricks Dealership replaced my front left bearing on my 2008 Chevrolet Impala back in 2022. I enjoyed watching this video and the awesome workmanship you restore to your customers. We need you in North Carolina❗ I like the helmet wearing for protection or just styling , so cool. I liked the autonomous sensory meridian response(ASMR)😊🎶👀🚙🔧⚙🛠

[@meseyc]

Quite possibly the first KZbin channel to make auto repair ASMR. . .

[@nexty3804]

I'd never thought chrisfix would do an asmr XD

[@Smokey420Greenleaf]

wtf is asmr?

[@lipponen7791]

@@Smokey420Greenleaf im not sure but video without any loud noises. No talking or nothing else. Somebodys watch asmr befor they sleeping. Its helps them sleep (not for everyone) "Autonomous Sensory Meridian Response"

[@brodyonhotspot5719]

But its good I like it

[@gunpowderHVA]

Being a mechanic for a living. I struggle to realize how this was so soothing.

[@spacebrain1944]

I found it soothing even as someone who's hardly ever wrenched anything

[@Felixkeeg]

The idea of doing/making stuff yourself is a lot nicer than actually doing/making stuff yourself

[@AlienBros]

Same.

[@gunpowderHVA]

@@Felixkeeg 🤯

[@_daldoly_]

This felt weird like I was secretly watching him work on his car or something lmao

[@joshhammond1247]

That is a genius idea using the tool box tray to keep track of bolts and used sockets. Definitely using that for my next project.

[@RJ-pw9ij]

Neighbor: What’s he doing this time? Other neighbor: I don’t know but he’s being suspiciously quiet this time...

[@andrewkelly3702]

Lol

[@takauchinishika4701]

I think he's sick

[@CorruptStudios]

I could literally sleep with this, this is the only ASMR I will accept

[@TheoF1]

same here

[@lisdexik5484]

The ONLY asmr I will ever listen to willingly.

[@jefframsum8386]

Merry Christmas Chris, you have saved our family thousands of dollars in repair costs from going to a shop. Thank you again.

[@Pwn3dbyth3n00b]

Imagine this is someone's first ChrisFix video and they click on another video of his. HEY GUYS ITS CHRISFIX HERE

[@bigyang5847]

Finally, a not cringe ASMR. I'd watch more of these

[@SM-bk4ye]

There's plenty of restoration channels that actually do some work but without commentary. Just the sweet sweet noises of machinery and tools

[@kkrystus]

This reminds me "my mechanics"

[@MrSupernova111]

Perfect timing! I'm going to be doing this over the weekend! Thanks!