Can you please redo this tutorial with a more complex car? Thank you

Good day bud. Do you have a video on how to fix an A/C UNIT on a HONDA CIVIC 95 esi?

My car is doing 12.3 and 14.3 safe to say the alternator is starting to go?

K-seal works the best

Thank you so much Chris you just saved my ass man 😂

my upper control arm is much different from yours, mine has a shaft running between the two bushings. I would love to know how to replace the bushings on mine with a shaft running through both bushings???

ChrisFix, I just want to say thank you for these videos. Your kindness is invaluable! I'm not a blue collar worker, but I like getting my hands dirty and want to start maintaining my own vehicles. Thank you for making that possible!

The hummingbird beat up… was it OK?😐 🤣🤣🤣🤣lmao!

Thanks for this tutorial! I can paint my old hotwheels now without messing up the paintjob!

You talk about the oil that came with compressor but didnt you vacuum everything dry in the system? Also, you say if you have any freon in system take it to a shop. Confused about that. Once you vacuum a system and the old freon is in vacuum pump, what happens to old freon...do you transfer it to a canister?

“Stealership”😂

Don't know what I'm doing wrong, but I can't get the motor back on. I've been trying for nearly a week!

Chrisfix unironcally putting links on the piece of paper

👍 you are very helpful 🙏

Very detailed video great job 💪🏿

Excellent video. Thanks!!!!!

How do you know when it becomes out of spec?

Why am i eve watching this i have no car 😔

Thanks for this video, Chris! What happens if I open petcock, take off radiator cap, put hose that runs on top of radiator facing drain pan, and open coolant reservoir, and it still doesn’t drain?

Hi sir.. my car.. carb system..modified use 110 A alternator, not to much electrical as usual.. just big electrical as AC, couple a headlight 100 w, and simple sound sistem..the problem when 3 of that turn on together.. voltage drop until 13,1 v some time 12,8 and RPM drop too, for about 100 RPM down. can you explain what problem? what should i do? Thanks

A little tip if you run into problems disconnecting the wires from the headlight fog light switch. I had a heck of a time. So after you remove all the screws/bolts and you go to pull out the electrical plug, after releasing the lock, and it still won't unplug. This is the problem I ran into. Get underneath the electrical plug-in and take a small screwdriver and push up on those two little red pieces of the lock, that should encourage the electrical plugs to release. Thank you for your video, it really helped a lot. And Thank You to the must famous handy men in the universe, Jesus and Saint Joseph whom I always ask for assistance with any work that I'm not experienced with 🙏

The lower one on the right side: Am I a joke to you?

this video is going to be very helpful in getting a razor cut of my R/T's paint. thank you Chris

in regards to transmission fluid change... what if you can't manually change gears? I have a 2018 chrysler 300 with a turn dial knob as a shifter.

Planing on buying E36 325tds -..yes a first car and it will be BMW E36..wish me luck 😂

Today is my 12th birthday.

Fantastic work Chris ! Greetings from Poland :)

12 hr job

Ii am lazy, so no

Listening to what you've said. From the compressor to the Condenser, from the condenser through to the Evaporator and ends right back to the compressor. What about your drier? Dehydrator and some people call it?

do you have a video how to remove the cv axle?

Kia Boyz are in shambles if Kia owners follow Chris’ directions.

I don’t own a car. But I went out and bought a wheel after watching this, just so I could clean it

Just like a new video!

This is absolutely amazing stuff all around by you Chris. May God continue to bless you ever more.

Steam cleaner is a godsend!

let's go remove deez nut

My pops traveled a lot for work. His preferred method of transportation was the car, which is why he owned 10 of them. Always driving no matter the distance. During winter months he would always keep a sleeping bag & his ski gear in whichever car he chose to drive for that particular trip. Just in case the worst would happen. I do the same. Just a few tips of many this great man passed along. RIP Pops. You are greatly missed.

Finally got around to doing this on my gf's Hyundai Sonata with foggy yellow headlights. After following along, the last head light came out fantastic but I feel I may have used too much clear coat on the first head light since it still looks a bit foggy while the last is really clear. Should I wait for the 24 hour cure and do a light sand or sand it down and start over to get the same look?

Thanks for the video

Never give up!! Got that advise from my r.i.p grandfather 😢. That was 20 years ago. I never forgot that.

İn fliping cars everybody wins

The side window of an honda was not destroyed

Is Fixd a good scanner?

Please face reveal I will sub

Oh visiting this again, when changing a compressor with the oil you really should see how much actually comes out the old compressor. Its because well the oil will actually lower the cooling efficiency of the ac system overall. Like if you manage to get more than nothing out of it, like if you get 2 ounces put 2 ounces in it or if you get nothing probably put like an ounce and change in the new one. Do that or whatever the manufacturer says when you put a new compressor in. Also a new accumulator or reciver dryer should be put in.

A Ford Escape is neither safe nor reliable, but okay.

An excellent presentation and procedure.

Hey Chris I found this video very helpful especially on an old 2013 that keeps cutting off ,thanks for sharing

Hey so i came across this video trying to figure out why i replaced a light( halogen) i had to turn on the light made sur it worked and then put it back in and now it doesnt work again i talked to a mechanic that got me started on doin oil changes and i signed my self onto a jeep grand cherokee and those are a pain with big hands the light worked though made sure of it but no its not on again he said something about the peices of metal on the bulb will i just have to replace it i only charged her like 10 and it took me forever haha better then the 80 she said it would have been any advise Edit: love your vids though wooder gets me everytime lol and to explain he said the newer vehicle are a little touchy and if not place it right and that metal touching it wont turn on he is an older guy great to work with but we are both so busy just see ling a text would be great😅😅