How To Replace A Mosquito Racket Battery | Long lasting mosquito bat | First time on internet

Make a powerful mosquito bat, Long lasting mosquito bat.
Charge once and use for several days. First time on internet.
This Video Will Show You How To Replace A Mosquito Racket Battery, and at the same time it will make it more powerful and long lasting and give more hours of backup once fully charged.
Charging Time : When battery fully discharged 8-9 hrs.(Under my testing battery reached 3.85v in 9hrs it's best to stop charging at this point) when battery partial discharged 3-4 hrs.
How to know when battery is low??
When the Battery LED goes dim, while you press the swat button, it's time to charge.
(Never overcharge the li-ion battery or it will get damaged and not charge again.)
All Rights Reserved: (c) The Video Studio
Disclaimer: all electrical work to be done by professional only.
This video does not encourage anyone to do anything shown in this video.

[@xyz-tu2ud]

For safety you should connect lithium battery with tp4056 charger because of lithium explosive nature

[@jec_ecart]

No BMS. No charging plug. Very unsafe design.

[@angelomuyrong2531]

No tp4056? Is it safe?

[@lionelperez659]

how about if i use 2000mah 18650 battery how many hours to make it fully charge?

[@ibringthelastwords1358]

Hi finally someone got and test my idea :) I just want to know if it is safe? 18650 batteries are known to explode on vapes so I wonder how safe they are? also can you try that on 2 18650 to double the capacity? thanks man !

[@thevideostudeo]

It takes 8-9 hrs to charge Cell. 2pcs won't charge ,current from capacitor charge is only 80 to 100 mA. if you want to connect two in parallel you will need to charge the battery with external charger.

[@I_am_SoSh]

If you want to use lithium-ion battery make sure you use tp4056 circuit with auto cut off.Without tp4056 its dangerous to use this battery as there is a risk of explosion if battery is over charged.The circuit which comes with such rackets is not suitable for lithium-ion batteries.

[@kailashsaini8871]

Bolo mere bhai bolo nuban bolne me liye di he koi andha huva to sunke tik karlega bat ko koi bbera huva to dekh me shi kar lega bolna jrori he

[@rupeshpatel95]

Bina charging module ke jugad se lithium ion battery blast ho sakti hai bro Aisa jugad mt sikhao

[@helloeveryone6614]

Now also can we charge the bat as usual? Please reply.

[@thevideostudeo]

yes

[@rogentrocio4531]

Does it have a charging protection like bms or something?

[@thevideostudeo]

no, for Bms charging check my other video kzbin.info/www/bejne/mnTPZIeViKyDrZo

[@SirJLR]

why other video they put a tp4056 for charging.. can u explain it?

[@thevideostudeo]

it will protect battery from overcharging.

[@wasisbudiyanto2127]

Lama bgt ...

[@ncramu1280]

How to protect from over charging. How many hours have to keep charging. Reply

[@thevideostudeo]

if you are worried about overcharging you can use the method in this video. kzbin.info/www/bejne/mnTPZIeViKyDrZo

[@MS-nr6rd]

Aap video me bolo

[@DeepakGuptaYT]

Mere Bhai lithium battery ko acid circuit se charge karoge... Wrong connection hai don't try

[@thevideostudeo]

hi you can use this method instead. kzbin.info/www/bejne/mnTPZIeViKyDrZo

[@harsimranjit2886]

Sir when we connect 18650 /3.7v /2000 mah battery button dbatte hai tou suuu suuu ki awaj atti hai ... Spark sahi karta hai awaj kyo atti hai

[@thevideostudeo]

if hissing noise is coming from bat net mesh, then it is working as good as new and net clean. 😃 if it coming from some part of circut or battery , you may leaked components.

[@ncramu1280]

Cutting the wire of mosquito bat one end and connecting wire with ac adaptor

[@thevideostudeo]

for charging with adapter use this method kzbin.info/www/bejne/mnTPZIeViKyDrZo

[@pradeepbaliyan3938]

श्रीमान जी क्या आप बता सकते हैं कि इस बल्ले का नेट कौन बनाता है या कहाँ मिलता है। उसके बारे मे जानकारी देने की कृपा करें

[@surojruidas436]

sirip dikhane se kuch nahi hogi , har kisi ko batana vi hoga ok tab tumara vdo dekhigi or like kare gi ok

[@budgetpilgrim]

I have tried this but the power is not strong like the default battery.

[@thevideostudeo]

if it not sparking with good battery , your bat may have other defective part like the transistor , or the 2000V capacitor, so check these too.

[@harshpanthi466]

Isme Kitana time lagta hai 1200 mah ki bettery ko charge hone hai

[@thevideostudeo]

5-6 hrs

[@amitmandal6710]

Nice

[@thevideostudeo]

Thanks

[@ironlegion3174]

Garibi me kaam dikhra bhai

[@sandipbhalerao6933]

H

[@ncramu1280]

Can we charge with ac adaptor cable

[@thevideostudeo]

check this video for adapter charging. kzbin.info/www/bejne/mnTPZIeViKyDrZo

[@lekhrajraghwani8962]

Laptop ki battery lagane ke bad meri charging light ki LED nahi jal rahi hai jab ki LED light new and thik hai

[@thevideostudeo]

what voltage is battery showing in multi-meter if tested in open circuit. also check if you connected battery in correct polarity.

[@Anshsharma83190]

Battery ka prove kitna hh sir please bataiye

[@thevideostudeo]

100 to 200 /-

[@fireofgaming4254]

Full Charging time kya he 18650 ka

[@thevideostudeo]

plz check description.

[@ashokkoppula8486]

sir...successfully teek hua hai lekin ye battery risk hai kya aur ye battery kitne der charging kar ne se accha rahega

[@thevideostudeo]

hi , if you have used 2000 mah battery once fully charged it can work for many days. you can put in charge for 2 hr after full usage for 1-2 days.

[@ashokkoppula8486]

@@thevideostudeo ok thank you

[@betagaming1859]

Can we use 9v battery

[@thevideostudeo]

no, only 4-4.5v max.

[@sudhirwarik1489]

Charg ho sakata hai us bridg rectifier se ye battery ya dusara charger lagana padega kya sir

[@sudhirwarik1489]

Plz batao sir

[@thevideostudeo]

yes it will charge.

[@sarva842003]

ye 4V Li-ion battery kahan milta hai aur kitne ko milta hai?

[@thevideostudeo]

you can find it on shopping websites, I took out 1 piece from power bank.

[@GauravYadav-qx4cn]

1.2 volt 1000 mah work karegi kya bat me

[@thevideostudeo]

yes it can work, but at least 3v needed for circuit to work properly . so you need 2 cell in series.

[@GauravYadav-qx4cn]

@@thevideostudeo can you suggest me another battery which work better or provide any link to buy because I didn't find in near market

[@thevideostudeo]

@@GauravYadav-qx4cn we can use Nicd cells in series.

[@frmgmykgregorio7365]

Battery lng ba ang gagalawin, wala nang iba?

[@thevideostudeo]

?? english please

[@chetnrewatkar5754]

Charging hoti hai kya

[@thevideostudeo]

yes

[@kabbadi3645]

Sir kitne volt ki battery hai

[@thevideostudeo]

4.0v li-ion.

[@onurguzel16]

Is it 18650 battery?

[@thevideostudeo]

yes

[@kecwonline8639]

how to protect from over charging. how much time should i charge the lithium battery?

[@thevideostudeo]

check description.

[@manjunathinavalagundmanjun9229]

​@@thevideostudeo1:01 1:03

[@prashanthg6499]

My battery wire not connected to circuit board it’s broken both +ve and -ve so tell me how to connect if I give wrong connection then it’s a big prblm

[@thevideostudeo]

positive goes to the switch, there should be a small + and - sign on the board printed. if you +,- not printed then you will need to check the bridge rectifier output to find the +ve and -ve terminals.

[@Urlipumallik]

Mera Bar Pe Spark Ho Raha Hai Phir Bhi Machhar Nhi Marta Kyun

[@thevideostudeo]

dirty net , battery low, transistor or capacitor defective.

[@Urlipumallik]

Spark ho raha hai battery maine badla hai 3.7 ka lithium ion battery or net ko kaise saaf kare

[@thevideostudeo]

@@Urlipumallik if you have metal polish or WD 40, or you can use kerosen oil.

[@cj5903]

Sir after replacing the battery can it be recharge using the built in charging terminal?

[@thevideostudeo]

yes

[@sumantamandal5723]

No it wouldn't