How to Replace a Pedestal Sink with a Vanity

Here is the sink that I ended up installing:
www.homedepot....
If you want to shop around on on amazon for similar vanities, here is a good place to start:
amzn.to/3nkbxLd (affiliate link)
amzn.to/3b78nVi (affiliate link)

[@alfredosousarubio9163]

It would be very helpful if you could please add all of the tools and brands you used, so that we can get similar stuff, since it looks like you have all of the appropriate tools, and the whole “plumbers kit” going… Stuff that many of us may not… but that would give us an idea of what tools we need. thanks

[@MzVee106]

Great video 👌🏾 I'm glad I found it, I'll be replacing the pedestal sink in my half bath with a vanity sink.

[@burrheadjr]

Let us know how it goes

[@bronosextremely7606]

I thought someone was yelling when you started cutting but great VIDEO!!!

[@aaliyahhernandez223]

Lol me too 😂

[@napoearth]

That lag screw may seem like it's spinning, but it may actually be really long. Mine was. I just held pressure away from the wall by putting two fingers behind the washer and kept unscrewing until it came out.

[@rufuslander6205]

Thank you this just saved me cutting holes in the wall

[@bmac8497]

Great video, easy to follow. Gonna save me some money for sure. Thanks

[@erw0039]

Who else thought this man was screaming when he started cutting the screw off? lol Great video though

[@barrysuss4421]

🤣1:48

[@denisem5437]

Thank you for this enlighten video. Very very informative.

[@lynnesteele9682]

Thank you for an excellent tutorial.

[@HarshveerSAINI_LorenzM]

Thanks for the detailed video tutorial 👌😊

[@odgie9915]

Good job. Nice to see it done with helpful commentary.

[@burrheadjr]

Glad it was helpful!

[@zoekoestel5562]

Could you provide a list of tools necessary to complete the job?

[@austinnate]

what's the name of that silicone you used? seems perfect for small jobs!

[@jpgpsantos]

Nice and detailed explanation, did the same recently

[@greg.s8592]

Thanks for the video, it was very detailed and informative

[@cocoprettyproducts133]

Thank you

[@itsrainingcatsanddogs]

Are we not supposed to stick the sink with vanity with something or is it just placed on top of it??

[@FabulousNtheKitchen]

This was so helpful. Thank you

[@valefercrz]

Hi, thanks for the video. It's very helpful. I want to replace the pedestal sink in my powder room with a vanity. I'm looking at a 22 in. D x 30 in. W x 34.5 in. H vanity from Home Depot. Do you know if they supply lines sizes are standard? Is there something specific i have to measure to make sure the faucet fits? Thank you!

[@burrheadjr]

The supply lines are mostly standard, unless you have an odd situation.

[@cheereyferriss4211]

Great tutorial!

[@harminderkharay8887]

Very nicely explained, thank

[@KarmaDLC]

What did you use to set the sink bowl on top of the vanity box

[@russsyracuse8143]

Please. What is the silicone you used. Thanks!

[@lisanewby3583]

Great video

[@kimberella2105]

How long did it take u to do this from start to finish? Removing the old one and installing this?

[@burrheadjr]

I don't remember exactly, it was all in the same day, and it can be tough for me to gauge, because I was also setting up cameras and filming while I did it. I would say that 3-4 hours sounds about right though, but be prepared for unexpected surprises that pop up in every individual case that push that time to take longer.

[@kellyffayad2981]

Was the drain pipe from your old sink?

[@keith606]

Do we need plumbers tape to connect water supply lines since there is a rubber washer in the supply line connection?

[@burrheadjr]

The plumbers tape doesn't need to create a seal in this case. Many times where I use plumbers tape, it usually is part of an application that connects to a washer anyways. The plumbers tape DOES help you to tighten up the connection to the rubber washer, and can help with the seal a bit if there is a little trickle. I am sure you can get away without it, as it was done like that for years, but if you got it, us it. If you gotta make a trip to the store anyways, grab some.

[@transformationpinnacle8955]

If you were to do this for someone, what is the labor cost?

[@burrheadjr]

I actually asked a plumber what he would charge, and he said it would have been $800.

[@teebone806]

Good job can u come and do mines 😂

[@MD31NH3VN]

ugh tysm

[@moth450]

My sink has no screws to wall. Just chaulk. It seems I need to pry it off wall somehow

[@burrheadjr]

A nice blade should help

[@moth450]

@@burrheadjr got it. Thanks

[@sumanshrestha143]

Pedestal was better looking