How to Replace a Snub Mount on a B7 Audi A4

[@ReydioTube]

Doing this today (034 Motorsport bushing & mount). I imagine the hardest part about it will be removing/reinstalling the belly pan 😅

[@mariosolorzano7657]

Dude I actually had this planned for this afternoon

[@fbekker1838]

Can you do a video on the rear Transmission mount

[@fbekker1838]

One of the better videos. I found that all the rubber snub mounts for this model does not fit. Seems there is more than one type on these models.

[@scottadams3772]

The snub mounts for the 2.0L may be different than for the 3.2L motors. Both are Audi A4 B7.

[@dylanwilkinson5733]

Can you do this with a regular jack not a lift

[@arminhodo6833]

You helpd me a lot

[@DOMS4.]

Just ordered a ECS polymount for my B6 S4. I wish it was as easy as the A4's.

[@austinstephensparks]

but it is?? lol

[@DOMS4.]

@@austinstephensparks They literally use a completely different shaped engine side mount. Also there is less than 1.5" of clearance, you can't fit a ratchet in. Only way is to slide the rad support forward.

[@EagleBayNightSupplies]

Did this yesterday. It sucked😅

[@UptownFights]

2002 Audi a4 1.8t Im having vibration when I come to stops in drive, I've replaced everything pcv, maf, suction pump valve, crank, cam sensor, plugs, repaird coil pack wires, and still can get rid of vibration. No check engine lights. Good boost on acceleration. I have not done snub nose but mine looks really good, completely there. I hear some people shave theres down 1 mm so it doesn't hit in bracket at idle? I hear you have to instal this thing in drive with brakes pressed, and center it. You mention none of these procedures in your video. Do you think this could be possible for vibration at idle?

[@karangulati2005]

Hey bud. I have a 2017 Audi A6 C7.5. I am wondering if my car has a snub mount? I mean will this fit? Thank you 🙏🏽

[@mistermofo28]

are the audi a4 B8 2012 the same? i can find part listings for b8 on b6/b7

[@yuanmengqu]

Hello， thanks for your brilliant Video. I got a question, I have a 2012 vw Touareg 3.6 FSI. Recently reached at 120000kms. Local dealer said my vw 8 speed transmission is sealed with lifetime oil. Does not need any service unless there is issue. Is the correct? Thanks

[@RBZ06LT6]

Yes it is

[@bjornwaring294]

Do you have a video for replace or fixing diesel heater on Passat B7?

[@gamesandroid-ios7742]

hello i have an audi a4 b6 1.9tdi to the rear passenger makes noise to block the ear can this snub holder be the problem kit

[@MrGilly]

What is the name of the frame where the front motor mount is connected to? The frame with the tubes on the sides (what are they btw?) Mine is very rusted on my b6 and i wonder if it's easy to replace..

[@romannevarez4236]

Hi I have a question I have a 08 audi a4 with a code p0653 and p1751 and my PRNDS is illuminate and it won't change any gears if you can help me please

[@MichaelConroy24]

Is this the same location as the 3.2l? If not can you show one?

[@slingshotnerd]

kzbin.info/www/bejne/f3qyi2V9rb9_b6M This guy has a video showing it on his 3.2L v6

[@romeurego5252]

What's consequences does it have if the snob mount was in ruff shape

[@johnc9228]

Can this cause clunkin when changing gear

[@CosmicConner]

Maybe or your center support carrier bushing jxb makes a kit

[@L00n1x]

If you can find poly versions of this mount i'd recommend it.

[@jonasthemovie]

The Neuspeed is great.

[@heanstone1327]

They are too stiff and make your ride shitty

[@costelungureanu8657]

Ce mărime are un tampon din față

[@TheWolf133]

You didn't really torque them did you :') A lot of parts are not available for my car, audi tt mk1 180 front wheel drive. To bad, otherwise i would order everything i need for my car on your shop.

[@jonasthemovie]

They were torqued. To some torque that is good enough.

[@abdulhanif7247]

9

[@wafi3187]

Any one who can’t replace snub mount shouldn’t be working on cars especially not on Audi’s

[@RBZ06LT6]

Relax, there is a learning process.

[@byob1423]

I'm not a mechanic but I replaced both engine mounts, it's not as hard as it looks, it's just compact and lots of odd size bolts

[@korps3847]

can i use this for a 2007 1.8t sline a4 ? automatic transmission if it means anything @deutscheautoparts

[@misu377]

Hi , whit vcds I can make cvt adaptations/resets? I tried but not worked