How To Replace a T2 Bay Clutch Cable

Mark shows us how to replace a clutch cable in a VW T2 Bay.
--------------------------
Products used in the video.
--------------------------
Clutch Cable Bundle Kit VW T2 Bay 1971-1979: www.justkampers.com/211798335...
-------------------------
Visit our website - www.justkampers.com/
Just Kampers are proud to be a recognised name in the classic VW car and classic and modern campervan community when it comes to the provision of parts, spares and accessories. Whether you’re looking for awnings, engine parts, heating systems or camping equipment - we have it all.
With a rich history dating back to 1989, Just Kampers have continually evolved to be the specialist VW parts provider you know and love. Not only do we supply VW campervan parts and accessories for VW T2s, T25/T3s, T4s & T5-T6s, today, we now also provide further specialist VW services, including camper insurance. Discover more about the Just Kampers story.

[@johnnewcomb1128]

I thought my throw out lever was bad after I replaced the cable. After I pulled the motor it looked fine. Going to check the crank arm and hope that's it. Thanks for the insight! Peace

[@salcarceller2055]

The reason someone may have added those washers and nut onto the bowden tube may have been to get the tube to have more curve? This will cause a bit more friction on the cable and reduces clutch chatter.

[@justkampers]

Hi, our bowden conduits are the correct length to prevent the clutch chatter. Many Thanks

[@bryanevans111]

How much freeplay did you adjust for at the pedal. Bugs are like 1/2 to 3/4.... Thanks for the amazing video!!!

[@justkampers]

Hi, it was about a half inch play at the pedal.

[@stevecanyon23]

Hi Mark, thanks for the video. Is your bus a T2a? Mine is a 1977 T2b and it looks a bit different aaroung the pedal area. And mine is a left hand driver.

[@justkampers]

Hi Steve, our bus was a T2a that maybe why the pedal area looks a bit different.

[@stevecanyon23]

@@justkampers whereas there are slight differences in the pedal pivot area (not 'pedal' area as I wrote previously) vs. the T2b, the logic remains the same, so your video is very helpful. I hope I can manage to get the new cable and sleeve in as smoothly as you did. Looks like a walk in the park.

[@Brendan-sz9xp]

Do you know where I can source one for a vw t2 Brazilian bay on a 2006 plate

[@justkampers]

We sell a Universal Accelerator Cable that would fit a VW T2 Brazilian Bay if it is a 1600 Aircooled. www.justkampers.com/00-4863-0-universal-accelerator-cable.html