That little double tap on the table that John does, after each intro (00:45 in this video) makes me smile for some reason. Makes me feel like these projects are very achievable, even before I begin mine. 🙂
@bowhunter10167 Жыл бұрын
Thanks you make it look so easy .
@thangknowa3288Ай бұрын
Great place to get parts from, I buy my water pump and stuff from them every couple of years, quality name parts, good prices, UPS ships pretty quick. They can pull up quickly what you bought previously to assure you get the right stuff again.
@trevorrohre93384 жыл бұрын
Thanks much for making this video. It really made the job a lot easier. One thing that would have saved a few seconds would be if you'd mentioned that the wear plate has to go on a certain way. At first blush it looked symmetrical but when the holes didn't quite line up it was time to remove it and flip it over. Also, the shift boot doesn't come with a zip tie to seal it (a minor detail but one that stuck in my craw. It's of those things that tells you what kind of company you're dealing with, esp given that the parts are anything but reasonably priced. I swear it will keep me from ever buying a Mercury product again). Also, it sounds like the 60 inch pound torque spec on the bolts you mention is pretty crucial in that it allows things to float and move a bit and prevent wear on the drive shaft.
@craigh33329 ай бұрын
Awesome video, I have a 1997 Honda 45 HP, do you have a video on how to replace the water pump for that motor? Thanks
@KeithTurner-ik7em6 ай бұрын
Do you have a video to replace the water tube on a Mercury 40ELPTO?
@mikeeverman14204 жыл бұрын
Looks simple enough i paid big money for having this done one time now I’m going to do it my self
@joakimmoqvist2346 Жыл бұрын
Hello great video John , i changed my impeller recently by watching your video which helped me alot. I have a question about the propeller when i put the gear in to reverse mode is it possible to move the propeller by hand in any direction then? I have a mercury 50 hp 4 stroke from 1997 Best regard Jocke
@terrybozemaniii12754 ай бұрын
I’m having the same issue right now. We’re you able to fix your issue?
@KMLTimesTwo4 жыл бұрын
Thanks for the video. There are 2 tube seals that come in the kit (and that you show in the video. The black one...and then the gray or white one. Is this for a different motor? If not, where does this one go?? Thanks!
@RickeyWarren-jx3dc6 ай бұрын
Changing out water pump in a 2002 mercury 40 horse 2 stroke engine have t 2: rubber washer where do they go
@ntj030885 Жыл бұрын
Can I use Lucas multi purpose marine grease for this? It’s blue in color if that maters.
@cajah10004 жыл бұрын
I have a 2 year old 40 that sand had clogged the thermostat. Do you think I need to go ahead and maintenance the pump after sand? It's still peeing like a horse but took it back out yesterday run fine for a moment them the beeps hit again. So either I missed some sand or something else is wrong. Checking the thermostat again today but the first time got like a 1/2 cup sand out.
@Shelterguy1003 жыл бұрын
i have a 2018 40hp 4-stroke mercury outboard. Is this kit the same one because the motor you have in the video is much older. Do you have more current video's for newer models?
@anpier9264 жыл бұрын
Thank you, simple and useful!
@lime3994 жыл бұрын
I need to order the boot somewhere??
@jorgeme734 жыл бұрын
I would like to learn how to replace a Fuel Pump in a 2006 25/30 HP EFI 4 Stroke Outboard motor. Motor starts and then stops. Never keep running for more than couple seconds. Don't know what exactly the issue is.
@grahamhumphrey53032 жыл бұрын
Great video, just a question though how does the selector shaft come out ? The long selector shaft on my engine has a slight bend near where it goes into bottom housing and its jammed up not moving up and down
@bradleyhunter80062 жыл бұрын
How do I do this on a jet
@phazzie3 жыл бұрын
What is the part number for the boot that was also replaced?
@AirSofter1319953 жыл бұрын
Your best bet is to lookup your motor's Serial Number on the Mercury Parts Catalog page below and find the part number from there www.mercurymarine.com/en/us/parts-and-accessories/parts-catalog
@BoatParts3 жыл бұрын
Hi Wayne-- this is the boot we replaced: www.boats.net/product/mercury/822158
@MARIAUCOURCHESNE2 ай бұрын
I cannot re-install my Lower section Will not get in place
@thangknowa3288Ай бұрын
Danger marine has a video just for you, shows you the "Tricks" - including the "Back Saver".
@ShaunIsOnFire5 ай бұрын
60 inch lbs and not foot lbs. I almost made a big mistake lol. Triple check everything.